Flameproof cable glands

IS & Ex

November 2021 IS & Ex

A new flameproof cable gland range from Pratley allows for soft-bedding cables like PVC and the like, which are prone to creep, to be fitted to flameproof equipment without any concern regarding cable damage or poor long-term sealing.

The Pratley Taper-Tech flameproof range consists of glands in two unique categories. First is the Pratley Taper-Tech gland for armoured and braided cable. This is a ‘double compression’ gland, meaning it has both an inner and an outer seal. The second is the Pratley Taper-Tech single-seal flameproof gland, also for armoured and braided cable, but with a durable rubber shroud.

The unique feature of this flameproof cable gland range is that all versions are fitted with Pratley Taper-Tech flame seal technology, consisting of tapered seals made from superior, Pratley-developed, high-temperature and low compression-set elastomers. The seals all have a taper on the leading edge that abuts against the gland nipple taper on the inside. The taper on the bush and the one on the cable gland’s nipple are angled differently, which means that, under pressure from the front when it is tightened, this differential taper allows the bush to slide down the taper easily, reducing the force needed to achieve radial compression.

A major benefit of this technology is low initial radial pressure or a small amount of contact pressure on the cable. This is important because most cables in the field are made from PVC, which exhibits ‘cold flow’, meaning the relaxation of the cable bedding over time. Flameproof cable glands fitted to flameproof equipment are intended to seal against extremely high explosion pressures, which in many cases may be as high as 30 bar. For the seal to function properly, there must be adequate pressure between the seal and the gland bedding.

As the leading edge of the seal forms a taper in the direction of the applied explosive pressure, when this applied pressure increases so too does the contact radial seal pressure on the cable bedding. Once the pressure is relieved, the bush returns to its initial low-pressure state, so the high seal pressure is only on the cable when it is needed.

Taper-Tech completely negates cable damage usually experienced with subpar back seals, while complying to the stringent IECEx flameproof cable gland requirements.

Share this article:

Cathodic protection system for hazardous environments
Omniflex Remote Monitoring Specialists IS & Ex
When NSW Ports in Australia embarked on a two-year programme to rehabilitate the structures and combat corrosion levels at its Bulk Liquid Berth 1, it commissioned Melbourne-based consultancy Infracorr to deliver a bespoke cathodic protection) system. To deliver the system safely, Infraccor engaged cathodic protection specialist Omniflex to support the hazardous area and remote monitoring aspects of the CP system design.

Read more...

Leading the way in PDS technology
IS & Ex
Booyco Electronics, an original equipment manufacturer specialising in mine safety equipment, has witnessed a surge in demand for its proximity detection systems (PDS) and collision prevention systems (CPS) since the Mine Health and Safety regulation focusing on trackless mobile machinery was promulgated. These systems offer crucial vehicle-to-pedestrian and vehicle-to-vehicle detection capabilities.

Read more...

Ensuring lone worker safety
IS & Ex
The Conextivity Group’s startup – Wearin’ – has developed a solution connecting the lone worker with the control centre. This was commissioned by concrete producer, Pro Beton to ensure the safety of its teams of machine operators and cleaners working on production sites during the day, night, and weekends.

Read more...

Safety breakthrough in live testing of large equipment
IS & Ex
While essential to effective maintenance, the live testing of mining vehicles and equipment can be hazardous and time consuming; but this has all changed with the SafeGauge range of digital testing systems. Developed in Australia, SafeGauge is now distributed in South Africa by Booyco Electronics, known for its leading role in promoting safety on mines through its proximity detection systems.

Read more...

Explosion-protected control units
Pepperl+Fuchs IS & Ex
The new range of control units from Pepperl+Fuchs offers a clever solution for switching and controlling circuits in hazardous areas that are designated ATEX/IECEx Zones 1/21 and 2/22.

Read more...

The importance of understanding SIL ratings
Omniflex Remote Monitoring Specialists IS & Ex
Major industrial accidents around the world, like the Bhopal chemical plant disaster, have occurred due to insufficient and poorly designed safety systems. Gary Bradshaw, director of alarm and safety system specialist Omniflex, explains how SIL ratings work and the dangers of the misconceptions that exist around them.

Read more...

Mobile workers 4.0
Pepperl+Fuchs IS & Ex
Intrinsically safe smart devices enable lone mobile workers to work seamlessly throughout the plant with the help of digital support. The significant increase in production efficiency and reliability is noticeable.

Read more...

Functional safety over EtherCAT
Eagle Africa Technology IS & Ex
HMS Networks has released a new version of the Ixxat SafeT100 module, allowing users to implement safe I/Os for FSoE (Functional Safety over EtherCAT), which was previously available only for PROFIsafe and CIP Safety.

Read more...

Overcurrent protection for explosion-protected areas
Phoenix Contact IS & Ex
The customisable Caparoc circuit breaker system from Phoenix Contact now also offers modules for explosion-protected areas, thereby extending the range of possible applications.

Read more...

IS & Ex

Flameproof cable glands

Further reading:

Published by Technews