SAIMC


SAIMC: From the office of the CEO

July 2021 SAIMC News

The Identification of Engineering Work that has been in the making since 2000, was eventually gazetted in March this year. People now have roughly three years to comply – depending on your surname.


Johan Maartens.

Responsibility of companies

Companies not employing anybody that does engineering work can relax – this is not for you. Companies whose employees do perform engineering work, as per Identification of Engineering Work (IoEW), may also relax as long as they inform their customers that they are not qualified to do the design or give advice, in the case of companies responsible for sales and those companies that are their customers, must ensure that all work is signed off by a person registered with ECSA.

So what happens if you do not follow the rules stipulated in the Engineering Professions Act of 2000? I expect that nothing will happen because government does not have the resources to police this issue – until something goes wrong that is. Then investigators will dig through the paperwork and just like in the case of ‘smooth tyres on your vehicle’, you will be guilty no matter what the other party did.

So if I decide that my company will continue doing ‘engineering work’, how must I treat this resource of mine?

Companies often come up with slogans like: ‘my employees are my most valued asset’. So, in order to start looking after this ‘most important asset’, what do you need to do?

• If you have candidates for registration in your employ, ensure that they get sufficient experience at the right level to be able to register.

• If you have employees who are already registered, you need to provide the necessary time for them to get sufficient Continuous Professional Development (CPD) points, so that they can remain registered.

• Allow them to join the appropriate Voluntary Association (VA) that will support them in their further development – and get a discount from ECSA for being a member of a VA recognised by ECSA.

• Allow them to participate in committee activities that will assist them in their quest for CPD points (they get points for serving on a VA committee).

• Allow them time to visit events that have been assessed for CPD points.

You are welcome to contact me for further information or you can contact ECSA directly at [email protected]

The age of the Professional has arrived!

Yours in automation,

Johan Maartens.


Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

SAIMC: From the office of the COO: A call to action: Elevating our profession through ECSA registration
SAIMC SAIMC
The engineering landscape in South Africa is evolving rapidly, and with it, the expectations placed upon us as practitioners. At the heart of this evolution lies a critical imperative: registration with the Engineering Council of South Africa.

Read more...
SAIMC: Durban branch
SAIMC SAIMC
At SAIMC Durban’s October Technology Evening, Nico Erasmus delivered a thought-provoking presentation on a topic close to every automation professional’s heart: PLC and Drive Manufacturer Generational Hardware - UpGrades, UpGates or UpRates?

Read more...
SAIMC: Johannesburg branch
SAIMC SAIMC
The Johannesburg Branch of the SAIMC hosted a successful Technology Evening on 10 September. The event was well attended and generously sponsored by Phoenix Contact.

Read more...
Why ECSA matters
SAIMC SAIMC
I always knew I had to register as a Professional Engineer. Then I opened the registration guidelines.

Read more...
Knowledge Sharing 4 Industry event
SAIMC SAIMC
The last of SAIMC’s Knowledge Sharing 4 Industry (KS4I) events for 2025 will be held in September.

Read more...
SAIMC: From the office of the COO: Enabling AI-ready manufacturing in South Africa
SAIMC SAIMC
Last month, I wrote about the ethical use of AI in our daily lives. This month, I want to explore two concepts, backed by different architectures and technologies, that can assist our manufacturing facilities to exponentially increase the pace of their digital transformation.

Read more...
SAIMC: Johannesburg branch
SAIMC SAIMC
The SAIMC Johannesburg branch hosted its June Technology Evening at the Bryanston Sports Club, where attendees explored a topic beyond the usual scope of process automation.

Read more...
SAIMC: Zambia branch
SAIMC
SAIMC Zambia recently facilitated an industrial visit to the Zamefa Cable Manufacturing Company in Luanshya for twenty automation students from Sinozam. The visit gave students valuable exposure to the advanced technology used in copper and aluminium cable production.

Read more...
SAIMC: Michael Brown named Honorary Senior Member of SAIMC
SAIMC SAIMC
Michael Brown, a recently retired specialist in control loop optimisation, has been named an Honorary Senior Member of the SAIMC, a rare distinction held by only a handful of individuals.

Read more...
SAIMC: Durban branch
SAIMC SAIMC
The August technology meeting was jointly presented by Pusetso Sentle and Suvern Moodley on the subject of ‘Universal Automation: Open, Flexible and Vendor-Agnostic Industrial Control’, and drew a record attendance.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved