April 2021Analytical Instrumentation & Environmental Monitoring
Systematic disinfection is an essential step in water treatment and legally required in many areas to protect people and systems from illness or damage. Monitoring of these disinfection processes is a must to comply with limit values and avoid wasting disinfectants. Endress+Hauser’s modular Flowfit CYA27 flow assembly provides a flexible basis for the measurement of disinfection parameters such as chlorine, chlorine dioxide, ozone or bromine, as well as other parameters of liquid analysis such as pH or ORP.
Maximum flexibility with minimum water loss
The CYA27 assembly allows for individual configuration of up to six modules, thereby enabling perfect adaptation to any process requirements. Assembly modules for disinfection sensors and pH/ORP, oxygen or conductivity sensors accommodate relevant measuring points for the analysis of drinking and process water. Further flow or dosing modules ensure a smooth operation of the measuring points.
The growing demand for water and the increasing water scarcity make it necessary to waste as little water as possible, also in bypass measurements. Disinfection sensors installed in the Flowfit CYA27 assembly need a sample flow as low as 5 l/h for a reliable measurement, meaning only a minimum amount of water goes to waste.
Safe measurement and easy maintenance
The new Flowfit system features a status indication light that allows for easy identification of the operating status of the measuring point. This indication light can be used to reflect the status of the flow, showing a red light if the flow is too low. It can also be connected to the alarm relay of the transmitter to indicate the NAMUR status of the measuring point. Operators can see the status at a glance and are able to react to potential errors.
When equipped with the optional cleaning and dosing module, the Flowfit CYA27 assembly requires very low maintenance. The dosing pump module is switched via the connected transmitter, for example the Liquiline multi-parameter transmitter with relay card, enabling automated cleaning cycles and acidification of the medium for specific disinfection process conditions, thus minimising the workload for operating staff.
Precision in every drop, powered by ICP technology Wearcheck
Analytical Instrumentation & Environmental Monitoring
Elemental profiling using Inductively Coupled Plasma – Optical Emission spectroscopy provides useful information on the chemical composition of lubricants.
Read more...Cleaning solutions for optical sensors Endress+Hauser South Africa
Sensors & Transducers
Achieving accurate and continuous process visibility requires reliable sensor performance, even in challenging media. Endress+Hauser’s CYR51 mechanical cleaning unit addresses these challenges by providing stable, automated cleaning of turbidity and UV-Vis absorption sensors.
Read more...A trusted oxygen analyser back in action Elemental Analytics
Analytical Instrumentation & Environmental Monitoring
After a period of discontinuation, Servomex’s Oxy 1810 oxygen analyser has officially returned.
Read more...Multi-channel pH and conductivity controller for the water sector Senseca
Analytical Instrumentation & Environmental Monitoring
The measurement of pH and conductivity plays an integral role in water systems. Senseca South Africa has introduced a multi-channel controller that allows the connection of up to five digital sensors and a frequency-emitting flow sensor.
Read more...DEKRA Industrial sets new standards for asset integrity in local petrochemical sector
Analytical Instrumentation & Environmental Monitoring
DEKRA Industrial South Africa has strengthened its position as a leader in hydrogen-induced cracking inspections through a strategic combination of advanced non-destructive testing techniques, investment in state-of-the-art inspection equipment and global technical collaboration.
Read more...Cutting-edge sensor technology Endress+Hauser South Africa
Sensors & Transducers
The advantage of Endress+Hauser’s Memosens technology is that digitised measured values and sensor information are transmitted via a non-contact connection from the sensor to the cable, and as a digital signal to the transmitter.
Read more...Ensuring clean and safe water Endress+Hauser South Africa
Editor's Choice Analytical Instrumentation & Environmental Monitoring
Endress+Hauser’s comprehensive range of disinfection sensors is designed to monitor and control disinfectant levels in water treatment processes.
Read more...High-precision measurement of insulating gases WIKA Instruments
Analytical Instrumentation & Environmental Monitoring
WIKA has launched the next generation of its GA11 gas analyser. It enables switchgear operators, manufacturers and maintenance companies to record the quality of SF6 gas and alternative insulating gases.
Read more...Say goodbye to missed contamination with real-time colour monitoring
Analytical Instrumentation & Environmental Monitoring
Applied Analytics offers seamless and rapid colour monitoring in processes with an industry-proven analyser that quickly and accurately monitors colour in your sample stream for impurities and inconsistencies.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version