Forklift drivers need a high level of concentration when manoeuvring in reverse. The camera-based anti-collision system from ifm, which automatically detects persons and obstacles in the rear area of the vehicle, warns the driver and stops the vehicle if necessary. Existing vehicles can be easily retrofitted with this plus in safety innovation.
Caution when manoeuvring
Particularly when reversing, drivers need to be cautious to avoid collisions with other forklift trucks or persons. They do not only have to keep an eye on the rear area of the vehicle, but must also ensure that the carrying ram does not collide with anything.
Drivers must still be fully alert at all times. They must always have 360° vision and monitor their load and where they are going. At the same time, they have to be aware of what is happening around them, e.g. colleagues and contractors crossing their path.
Collision warning system
In order to avoid critical situations, ifm has developed an automatic collision detection system. By means of a 3D camera, the system permanently monitors the rear of the forklift truck and gives the driver visual and acoustic feedback. Depending on the configuration level, the assistance system can even stop the vehicle, if necessary.
All obstacles are reliably detected, and, thanks to a special classification of reflective materials, e.g. reflective vests or clothing, the collision warning for persons can be given priority over other objects. This increases the safety of persons and leaves the driver enough time to slow the truck down and stop in time.
Easy retrofitting
The anti-collision system is offered as a ready-to-start application package, which includes all components to set up a fully functioning collision warning system on a mobile machine.
In addition to the camera, the monitor and the controller, the package contains all necessary cables and mounting accessories. This means it can be easily retrofitted on all mobile machines with 24 V on-board system voltage.
Commissioning is easy. After installation of the system, setup is carried out within a few minutes via the push-buttons and the colour display of the control unit. Only a few parameters (height and inclination angle of the camera, vehicle width, etc.) are required in the intuitive setup process. In contrast to some other systems, no PC is required for parameter setting.
Certified safe power for hazardous industrial environments Conical Technologies
IS & Ex
When working in high-risk environments like oil and gas, petrochemical plants or other hazardous industrial zones, safety isn’t just important, it’s essential. That’s why Traco Power developed the TIB-EX series of DIN rail power supplies, purpose-built to deliver reliable power even in the toughest conditions.
Read more...Smart pressure monitoring drives energy efficiency ifm - South Africa
Pressure Measurement & Control
The ifm PG17 electronic pressure gauge is part of the company’s next-generation PG series. It integrates IO-Link technology, enabling seamless, loss-free data transmission via a 24 V signal.
Read more...HMI with maximum performance in the smallest of spaces ifm - South Africa
SCADA/HMI
Whenever clear communication, precision and performance in the smallest of spaces are required, the most compact member of ifm’s ecomatDisplay family is the perfect choice. The 11 cm HMI makes no compromises when it comes to human-machine interaction.
Read more...Parker strengthens explosion safety
IS & Ex
Parker Hannifin has announced that its 37 mm Ex d m coils have attained new ATEX and IECEx Type Examination Certificates according to the latest explosion protection standards.
Read more...Maximum display performance in the smallest of spaces ifm - South Africa
SCADA/HMI
Whenever efficient communication, precision and performance in the smallest of spaces are required, the most compact member of the ecomatDisplay family is the perfect choice. This is a programmable, high-performance HMI display designed for mobile machines and installations.
Read more...Vibration monitoring in three axes ifm - South Africa
Sensors & Transducers
Machine vibrations are important indicators when it comes to assessing the current condition of a machine. ifm’s new and smart IO-Link vibration sensor helps to implement a simple and scalable condition monitoring approach using but a single device.
Read more...Electronic manometer with LED display ifm - South Africa
Pressure Measurement & Control
The new generation of PG type manometers are equipped with IO-Link and modern display units. Illuminated LED markings provide a quick overview of the current measured value. In addition to the various setting options for the display unit, IO-Link offers other advantages such as easy commissioning, quick sensor replacement and remote access options.
Read more...Stopping the sparks from flying
IS & Ex
Whenever electrical equipment is required for use in hazardous environments they must be designed with intrinsic safety in mind. Darren Barratt, product sales manager at alarm and event management specialist, Omniflex outlines the importance and key aspects of intrinsic safety design.
Read more...Easy parameter setting of vision sensors ifm - South Africa
Sensors & Transducers
Contour verification and object inspection are two of the most important functionalities in industrial imaging. With the new O2D5xx series, ifm now offers a solution that perfectly masters both functionalities
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version