Process and storage vessels incorporate limit switches to prevent overfilling of a tank or vessel (full indicator) or dry running of a pump (empty indicator). Anderson-Negele’s NCS series are ideally suited for the reliable measurement of limits in media with low water content, such as certain alcohols and cosmetics, providing universal application in bottling and pharmaceutical applications.
Capacitive working principle
Anderson-Negele level switches operate on the basis of the capacitive working principle. The measuring electrode, the medium and the conductive wall of the tank form an electrical capacitor influenced by three main factors: distance; area of the electrode surfaces; and type of medium between the electrodes.
The measuring electrode and the tank wall serve as the capacitor plates while the medium acts as the dielectric fluid. Due to the higher dielectric constant of the medium relative to air, the capacity increases when the electrode is immersed in the medium. Exposing the electrode has the opposite effect. The change in capacity is analysed by the level switch and converted to a corresponding switching command. The sensor outputs a 24 V DC signal (active output). The minimum and maximum (full/empty) switching functions can be swapped by reversing the polarity of the power supply. The capacitive working principle requires that the sensor tip, which is made of PEEK, be completely immersed in the medium. The advantage is that the sensor does not respond to foam or adherences and a signal is emitted only when the medium reaches the level. Capacitive measurement is most reliable when the dielectric conductivity and temperature of the medium are constant. Changes in the outer conditions are generally non-critical in media with high dielectric constant values
Next-generation condition monitoring
Sensors & Transducers
The next generation Sitrans MS200 multisensor from Siemens is setting new standards in condition monitoring.
Read more...Telco sensors for blocked/empty chute detection
Sensors & Transducers
Telco sensors overcome the problems of contaminated environments through powerful high-performance infrared sensors that ensure penetration of harsh pollution and guarantee reliable detectio
Read more...Cleaning solutions for optical sensors Endress+Hauser South Africa
Sensors & Transducers
Achieving accurate and continuous process visibility requires reliable sensor performance, even in challenging media. Endress+Hauser’s CYR51 mechanical cleaning unit addresses these challenges by providing stable, automated cleaning of turbidity and UV-Vis absorption sensors.
Read more...Next-generation gas meter module
Sensors & Transducers
Sensirion has launched its new gas meter module combining a low-power consumption mode, future-ready compatibility and seamless integration, all within the same compact form factor.
Read more...Food safety – a matter of weight
Sensors & Transducers
Weighing systems play a key role in ensuring product quality in food production, complying with legal requirements and avoiding product recalls. The Minebea Intec MiNexx portfolio has been specially developed to meet these requirements.
Read more...Telco sensors in the paper and pulp industry Gail Norton Instrumentation
Sensors & Transducers
The paper and pulp industry poses a major problem for most photoelectric sensors. Telco Sensors has overcome this with its powerful and high-performance photoelectric sensors, ensuring penetration of thick and harsh pollution while guaranteeing reliable detection.
Read more...Leaders in sensor technology Gail Norton Instrumentation
Sensors & Transducers
A new addition to the Telco Sensors range is the adjustable Proximity sensor, with a range up to 5 metres.
Read more...Cutting-edge sensor technology Endress+Hauser South Africa
Sensors & Transducers
The advantage of Endress+Hauser’s Memosens technology is that digitised measured values and sensor information are transmitted via a non-contact connection from the sensor to the cable, and as a digital signal to the transmitter.
Read more...Miniature inductive sensors ifm - South Africa
Sensors & Transducers
The inductive IY/IZ type sensors from ifm are used in various industrial areas where space is limited.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version