News


Do we need rogue IT units in the modern manufacturing plant?

May 2019 News

My very first ‘misunderstanding’ while employed was with what are known as ‘cowboys’ or rogue IT units. Young, eager to please, and even more eager to perform, I was stopped dead in my tracks by people with different job titles, working in different departments, but working with and controlling IT decisions and inputs. After a few back and forth emails, it became clear to me that just because I worked for the official IT department, did not mean there were no other ‘IT departments’ in the company.

What is a rogue IT unit?

A rogue IT unit is the term given to a team that is running its own IT operations alongside, but separate from, the official IT department of the company. In all manner of work I have done, in a variety of industries, I have always found that there are one or two individuals who insist on running their own IT operations for their plant or department. They have their own contracts with external vendors, they have their own spares and they, more often than not, have their own licence management, completely separate and void of any standards, methodologies and procedures set out by the official IT department.

Are they right or wrong… or left?

This is difficult to answer. If they operate IT on the plant in such a way that it benefits their operations better than the service from the official IT department, then I guess it is hard to argue against their existence. I have worked with excellent rogue units where they follow the standards set by the official department, but they have their own developers, support teams and contract agreements with third-party vendors, who are given access privileges on their network. Then I’ve worked with rogue units that just go way out left-field and almost create an entire IT department just for their plant, ignoring standards, procedures, operating guidelines, etc. These have all manner of repercussions of which the most concerning are security, licence infringements and contracting irregularities. Sometimes the brightest guys work in these rogue units, I’ve found cases where they are better qualified than their counterparts in the official IT department. But, on the other hand, they are mostly what industry calls ‘super users’, – people who know the system well enough to form a rogue IT unit.

If IT in the manufacturing plant is modern, why do we have rogue units?

That is a good question, and one that has many probable answers. I think we find rogue units in many factories because the official IT department either cannot meet the demands of production, or have set a strategy that does not align with the objectives this department has set for the future. It could also be that implementation times by official departments are long, where the urgency of a plant-floor solution requires a more agile approach. Or it could be a financial decision, some plants or departments run legacy systems that cannot advance technologically unless large investments are made, and they simply fall by the wayside when new technology or processes are adopted by the enterprise. But perhaps the simplest reason is that the rogue unit has the appropriate skills and experience for the specific plant, which cannot be found within the official IT department. The rogue unit then springs up and grows from there.

So, now that we know what they are and why they exist, do we need rogue units operating their own vision of IT in manufacturing? It would be irresponsible to say yes, but narrow minded to say no – therefore I say yes and no.

No, we do not need rogue units in a Utopian world, where the official department has internal divisions, like MES and IIT/OT teams. Groups that are part of the official IT department, but somehow meet the needs of each and every manufacturing operation of the enterprise, a mean feat, but doable when focused on specific IT domains from level 0 upwards.

And yes, we might need rogue units when we do not have the luxury of a large established enterprise IT department with an appropriate budget. We might need rogue units when skills and money do not match up, or when legacy systems and specialist support for operational requirements cannot be met by the official department. It might also be good to encourage collaboration between the two, to share their exploits for the benefit of manufacturing excellence.

Whatever the reason, rogue IT is here to stay in manufacturing. So, it might be a good thing if it came about genuinely as a matter of technological circumstance. What we do not need are rogue units operating for nefarious reasons stemming from internal politics or strategic disagreements about IT for business vs IT for manufacturing.

Lance Turner

Lance Turner is an MES specialist employed at Sasol’s Secunda plant. He has an honours degree in Information Systems with a focus on Enterprise Architecture design and solutions. A certified MESA MES/MOM student, his passion is amalgamating general IT across the manufacturing spectrum. Lance’s vision is for a converged IT and manufacturing discipline that will become the reality of Industry 4.0. His team motto is MES services that are always available, always stable, and always dependable.





Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

BMG achieves GBCSA Net Zero Waste Level 2 Certification
Bearing Man Group t/a BMG News
BMG has achieved Green Building Council South Africa Net Zero Waste Level 2 Certification after diverting more than 90% of operational waste from landfill, demonstrating how practical sustainability measures can deliver measurable environmental and commercial benefits.

Read more...
Pump spares and parts for Africa
News
KSB Pumps and Valves explains how its decentralised stockholding and local manufacturing keep spares and parts available across its installed base in Africa.

Read more...
Inspiration for times of change
Endress+Hauser South Africa News
More than 2000 customers, partners and experts gathered in Basel, Switzerland, for the Endress+Hauser Global Forum in April 2026. Under the theme of driving sustainable transformation together, the event combined keynote sessions on strategy, technology and the future of work with practical case studies from across the process industry.

Read more...
Local energy solutions rewiring resilience across Africa
News Fieldbus & Industrial Networking
Engineers across Africa are developing practical, scalable energy and mobility solutions supported by the Africa Prize for Engineering Innovation.

Read more...
The gender gap in SA’s engineering sector
News
South Africa’s engineering sector is facing a critical gender imbalance, with women making up just 16% of registered engineering professionals compared to 84% of men.

Read more...
Safe removal of the historic US 181
News
Mammoet provided the heavy-lift expertise that helped remove the 2300 ton centre span of the historic US 181 Harbor Bridge in Corpus Christi, Texas, using a precision lift-and-lower method that protected nearby marine environments and reopened navigation channels swiftly.

Read more...
Going Green initiative sees African Group Lubricants adopt electric forklift fleet
News
African Group Lubricants is transitioning most of its forklift fleet to electric power, a move expected to cut diesel consumption by around 85% and improve conditions across its manufacturing facility while delivering a positive return on investment in the near term.

Read more...
Africa Energy Indaba 2027 aims to ignite the power revolution
News
Africa Energy Indaba 2027 takes place from 2 to 4 March 2027 at the Cape Town International Convention Centre, bringing together ministers, utilities, investors and developers to accelerate energy generation, unlock investment and drive the continent’s industrial future.

Read more...
Major bearing tender for SKF
SKF South Africa News
SKF has secured a major bearing supply tender from an Algerian steelmaker, reinforcing its position in the metals segment across North Africa.

Read more...
Mining’s decarbonisation journey requires putting ESG commitments into action
Schneider Electric South Africa News
Schneider Electric specialists explain how mining and heavy industry can turn environmental, social and governance commitments into measurable decarbonisation results.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved