Every maintenance engineer worth their salt is looking for a balanced maintenance plan that improves plant reliability while reducing costs. Finding the right balance is not always as straightforward as it seems however, especially on sites with multiple measuring points and instrumentation from several suppliers.
Endress+Hauser’s Installed Base Audit is a three-phase analysis of all the instruments on a site to give a clear understanding of the installed base. By compiling a complete inventory users can start to make informed decisions with regard to maintenance, which allows them to focus maintenance efforts according to available resources, budget and production requirements. It also decreases the complexity of equipment inventory, manages migration of phased out devices, defines actions to optimise processes and, most importantly, achieves the highest possible plant reliability and availability.
How is this achieved?
Phase 1: Inspection of the production process and collection of plant data
In phase 1 of the audit, the production processes are appraised and all instrumentation and control technology components are recorded in an inventory. All important details about the components, the process criticality, process conditions experienced and how they affect quality, safety and availability are noted. This exercise includes spare parts inventory.
Phase 2: Data analysis and evaluation
An Installed Base Audit Report is then developed based upon the initial findings and contains recommendations for optimisation of your maintenance activities. The data is also collected in a maintenance database and augmented with additional information (W@M Portal). The report focuses on the following strategy developments: reactive maintenance (incl. spare parts inventory optimisation and technical training requirements); preventative maintenance (incl. calibration procedures and optimised calibration intervals); standardisation and installed base overview and migration strategy (developed in line with the standardisation planning).
Phase 3: Action plan
Maintenance is focused on process-critical devices rather than a generic approach using measurement type as a deciding factor. Out-of-date instrumentation technology is replaced at critical measuring points in order to avoid unplanned downtime. In terms of spare parts inventory, only spares that are needed for proces-critical devices have to be kept in stock, thereby reducing associated costs. The decision can be taken to use fewer suppliers and fewer component types (standardisation strategy). This has the immediate benefit of limiting the technical training and competencies that a maintenance team requires and also minimising the amount of different spares that need to be available. This saves you time and money and documentation is always up to date.
An Installed Base Audit gives plant owners the opportunity to find the optimum point where overall maintenance costs are minimised by an asset management strategy that reduces unplanned equipment related incidents and down time.
Oils don’t die, they degrade Wearcheck
Maintenance, Test & Measurement, Calibration
WearCheck explores the main ways lubricants degrade in service and how these degradation modes affect oil performance and machine reliability.
Read more...Inspiration for times of change Endress+Hauser South Africa
News
More than 2000 customers, partners and experts gathered in Basel, Switzerland, for the Endress+Hauser Global Forum in April 2026. Under the theme of driving sustainable transformation together, the event combined keynote sessions on strategy, technology and the future of work with practical case studies from across the process industry.
Read more...Real-time spectrum analyser Vepac Electronics
Maintenance, Test & Measurement, Calibration
The PXE series real-time spectrum analyser covers frequencies up to 20 GHz with a 100 MHz analytical bandwidth and ultra-fast sweep speed, supporting spectrum monitoring, interference finding and RF test and measurement functions.
Read more...Preserving a French heritage landmark Omniflex Remote Monitoring Specialists
Maintenance, Test & Measurement, Calibration
Omniflex supplied a remotely monitored impressed current cathodic protection system for the Perret Tower in Grenoble, a protected French heritage site, combining 24/7 corrosion protection with integrated surge protection against lightning strikes.
Read more...Operational efficiencies and safety compliance with preventive maintenance programmes
Maintenance, Test & Measurement, Calibration
Konecranes explains how its Lifecycle Care Preventive Maintenance programme reduces unexpected downtime, improves safety compliance and delivers measurable financial benefits for operators of cranes and lifting equipment across any make or sector.
Read more...Portable appliance tester Vepac Electronics
Maintenance, Test & Measurement, Calibration
Vepac Electronics’ new portable appliance tester enables precise safety testing of electrical appliances in accordance with DGUV regulation 3 and BetrSichV, with simple three-button operation and battery-powered mobility.
Read more...Why lubrication fails in mining and what to do about it
Maintenance, Test & Measurement, Calibration
Lubrication Engineers explains the recurring failure points behind mining lubrication problems and how the right product, storage and application practices can improve equipment reliability.
Read more...When digital twins move from concept to critical tool
IT in Manufacturing System Integration & Control Systems Design Maintenance, Test & Measurement, Calibration
Digital twins are moving out of the lab and onto the mine, the factory floor and the transport network where they predict failures before they happen. Amritesh Anand looks at where they earn their keep, the data and integration work behind them, and the security questions every organisation should ask before switching one on.
Read more...Why asset level intelligence is now essential for resilient wastewater plants Schneider Electric South Africa
Maintenance, Test & Measurement, Calibration
Sub-Saharan Africa’s wastewater operators face mounting pressure to keep ageing plants running smoothly and meet tougher environmental standards, all while lacking visibility into the health of their medium-voltage (MV) drives and other critical rotating assets. Adding predictive analytics, digital twins and enterprise dashboards enables optimisation across multiple sites, ensuring every drop moves safely and efficiently through the water cycle.
Read more...Optimise sludge treatment and reduce operational costs Endress+Hauser South Africa
Sensors & Transducers
Endress+Hauser’s inline measuring devices, the Proline Teqwave MW 300 and the Proline Teqwave MW 500, determine the total solids content of wastewater directly through microwave transmission.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version