Emissivity enhancer improves bright metal temperature measurement
December 2001
Temperature Measurement
Protea Automation Solutions is offering a Land Infrared emissivity enhancer that improves the accuracy of the Land System 4 and UNO short wavelength thermometers in the temperature measurement of bright metal strip. A further development of the groundbreaking 'Gold Cup' surface pyrometer Land introduced more than 50 years ago, the new emissivity enhancer ensures accurate temperature measurement continuously, and without contact.
It uses a unique nonspherical reflector - currently the subject of a patent application - that gives enhanced emissivity values at a distance of 30 mm from the target surface by maximising the number of reflections between the surface and the reflector.
Intended for use on low emissivity materials, the enhancer is especially suitable for flat, bright rolled finished metals such as stainless and bright annealed steels, aluminium, copper, nickel, brass and many other surfaces normally considered difficult to measure.
The shape of the reflector has been engineered for optimum performance at 30 mm clearance, supplemented by a reflective flange that minimises wide-angle reflections from hot backgrounds.
Suitable for any Land System 4 or UNO thermometer with an SGI or SFI close-up lens, the emissivity enhancer is housed in an accurate alignment jacket to facilitate sighting adjustments, and is supplied complete with an alignment bracket for easy distance and/or angle setting. The accurate alignment jacket also has integral water/air cooling and is designed to accept a standard Land System 4 back cap.
Protea Automation Solutions
(011) 719 5700
[email protected]
Further reading:
Temperature measurement solution for foundry
Temperature Measurement
AMETEK Land, a world-leading manufacturer of infrared pyrometers, scanners and thermal imagers, is helping an Indian foundry to support metal quality and reduce ongoing costs.
Read more...
Supporting sustainable steelmaking
Temperature Measurement
AMETEK Land is helping the steel industry meet global decarbonisation challenges with a range of solutions.
Read more...
High-precision data loggers for wire and thermocouple probes
Senseca
Temperature Measurement
Senseca, formerly the GHM Group, has launched new handheld meter/data loggers for Pt100 four-wire probes and thermocouple probes. These are redesigned with enhanced features.
Read more...
How wet steam undermines boiler efficiency
Endress+Hauser South Africa
Temperature Measurement
Endress+Hauser understands the daily challenges and demands placed on energy and utility managers across the spectrum of steam generation, distribution and consumption activities. Its global team is committed to working with its partners to overcome these complexities, and particularly those that aim for a safe, economic and sustainable sitsce of steam energy production and delivery.
Read more...
Dramatically reducing greenhouse emissions
Temperature Measurement
Online teaser: There is considerable potential for reducing CO
2 emissions in the mill process by optimising the heat source for drying. The most promising approach to achieving a carbon neutral process in a hot gas generator is the combustion of green hydrogen.
Read more...
Infrared camera for condition monitoring and early fire detection
Instrotech
Temperature Measurement
The Optris PI 640i thermal imager is the smallest measuring VGA infrared camera, with a body-sized volume of 45 x 56 x 90 mm, and weighing only 269 to 340 g, depending on the lens. It counts among the most compact thermal imaging cameras on the market.
Read more...
Paint curing applications in the automotive industry
R&C Instrumentation
Temperature Measurement
For successful paint cure, irrespective of the paint chemistry being used, there is a critical need to measure and control the temperature of the car body as it travels through the oven. Today, paint ovens are controlled in a sophisticated fashion via thermocouples located in each zone to give constant feedback on the ambient temperature.
Read more...
Universal temperature transmitter with drift detection
WIKA Instruments
Temperature Measurement
The new model T38 digital temperature transmitter from WIKA enables extremely flexible and stable temperature measurement. The instrument offers a maximum of sensor connection combinations, and a new type of drift detection.
Read more...
Temperature monitoring in the metal casting process
Instrotech
Temperature Measurement
During metal casting, the liquid material is poured into a mould, and after solidification becomes a solid body. Both too-high and too-low casting temperatures can lead to quality defects. The compact Optris PI 05M infrared thermal imaging camera from Instrotech can monitor the casting process.
Read more...
Pyrometer range with enhanced features
Temperature Measurement
AMETEK Land has relaunched its market-leading SPOT pyrometer range with enhanced features and benefits for a wide range of industrial applications. The new SPOT+ family offers a wide range of temperature measurement from 50 to 3500°C, and a choice of different wavelengths for applications including metals, glass, cement and lime kilns, and foundries.
Read more...
printer friendly version