Sterile air filter for dairy equipment
December 2016
Maintenance, Test & Measurement, Calibration
Sterile air filters are needed for dairy technology and for other sterile processes such as in the pharmaceutical industry. They serve, for example, to bleed piping systems after steam sterilisation, to ventilate containers and tanks when the filling levels vary or to decontaminate laminar flow of air in order to prevent those system components which are to be kept sterile from coming into contact with the contaminated atmosphere.
Sterile air filters serve as an interface between a sterile area and the surrounding atmosphere. Therefore, they must be viewed as an important part of a sterile system and their function significantly influences the quality of the product. The weaknesses of the sterile air filters are often insufficient monitoring, contaminated condensate and, above all, a working life that is too short. In close cooperation with the German Institute Versuchsanstalt des Fachzentrums fur Milchwirtschaft (Research Institute of the Competence Centre for Dairy Farming), Gemü has investigated this together with industry. After analysis of the technical status and an intensive development and testing phase, a sterile air node was developed to achieve optimum operating safety and filter working life according to today’s state of the art technology. In this case, the filter elements survive in excess of 230 sterilisation cycles in reproducible experiments.
Plant design constraints
In order to reduce the distance on the sterile air side, avoid deadlegs and to operate the steam line without puddles and without condensate banking, as many functions as possible are grouped in one central valve block. It is based on the diaphragm valve principle through which all mechanical valve parts are located outside the media-wetted area and only smooth internal geometries prevail. The sterile airline is steam pre-heated in order to avoid the formation of condensate. A defined gradient serves for dehydration purposes. Diaphragm valves are always installed before the condensate charge eliminators. In order to deal with unfavourable and changing pressure situations, regulated valves with motorised actuators are used and a stainless steel sintered element installed before the filter. Stainless steel globe valves control the steam.
The Gemü solution
The Gemü 600 central valve block is designed according to its task and worked from a single piece of stainless steel. The surfaces are ground and polished in accordance with its application. Gemü 650 valves with pneumatic stainless steel actuators, Gemü 653 manually operated valves with stainless steel bonnet and integrated seal adjuster and stroke limiter, and Gemü 698 motorised valves can be used for activation purposes. The sterile air is regulated by a special Gemü 568 stainless steel globe valve with a regulating cone and a safely diaphragm. Steam is controlled using Gemü 540 stainless steel pneumatic globe valves with various control functions. Electro-magnetically activated Gemü 3243/2-way valves, which are directly attached to the pneumatic actuators, serve as pilot valves.
For more information contact Claudio Darpin, Gemü Valves Africa, +27 (0)11 462 7795, [email protected], www.gemu-group.com
Further reading:
Oils don’t die, they degrade
Wearcheck
Maintenance, Test & Measurement, Calibration
WearCheck explores the main ways lubricants degrade in service and how these degradation modes affect oil performance and machine reliability.
Read more...
Real-time spectrum analyser
Vepac Electronics
Maintenance, Test & Measurement, Calibration
The PXE series real-time spectrum analyser covers frequencies up to 20 GHz with a 100 MHz analytical bandwidth and ultra-fast sweep speed, supporting spectrum monitoring, interference finding and RF test and measurement functions.
Read more...
Preserving a French heritage landmark
Omniflex Remote Monitoring Specialists
Maintenance, Test & Measurement, Calibration
Omniflex supplied a remotely monitored impressed current cathodic protection system for the Perret Tower in Grenoble, a protected French heritage site, combining 24/7 corrosion protection with integrated surge protection against lightning strikes.
Read more...
Operational efficiencies and safety compliance with preventive maintenance programmes
Maintenance, Test & Measurement, Calibration
Konecranes explains how its Lifecycle Care Preventive Maintenance programme reduces unexpected downtime, improves safety compliance and delivers measurable financial benefits for operators of cranes and lifting equipment across any make or sector.
Read more...
Portable appliance tester
Vepac Electronics
Maintenance, Test & Measurement, Calibration
Vepac Electronics’ new portable appliance tester enables precise safety testing of electrical appliances in accordance with DGUV regulation 3 and BetrSichV, with simple three-button operation and battery-powered mobility.
Read more...
Why lubrication fails in mining and what to do about it
Maintenance, Test & Measurement, Calibration
Lubrication Engineers explains the recurring failure points behind mining lubrication problems and how the right product, storage and application practices can improve equipment reliability.
Read more...
When digital twins move from concept to critical tool
IT in Manufacturing System Integration & Control Systems Design Maintenance, Test & Measurement, Calibration
Digital twins are moving out of the lab and onto the mine, the factory floor and the transport network where they predict failures before they happen. Amritesh Anand looks at where they earn their keep, the data and integration work behind them, and the security questions every organisation should ask before switching one on.
Read more...
Why asset level intelligence is now essential for resilient wastewater plants
Schneider Electric South Africa
Maintenance, Test & Measurement, Calibration
Sub-Saharan Africa’s wastewater operators face mounting pressure to keep ageing plants running smoothly and meet tougher environmental standards, all while lacking visibility into the health of their medium-voltage (MV) drives and other critical rotating assets. Adding predictive analytics, digital twins and enterprise dashboards enables optimisation across multiple sites, ensuring every drop moves safely and efficiently through the water cycle.
Read more...
How multiple boilers can minimise costly downtime
Maintenance, Test & Measurement, Calibration
Associated Energy Services explains how multi-boiler systems reduce downtime risk for South African manufacturers, covering redundancy planning, fuel source diversification and the strategic management of backup boiler capacity.
Read more...
Field calibration made easy
Instrotech
Maintenance, Test & Measurement, Calibration
Instrotech’s locally designed and manufactured Calog calibrator range feature a rugged IP54-rated housing, backlit display with data logging via SD card, and a lithium-ion battery with approximately eight hours of run time.
Read more...
printer friendly version