The new AP05 position indicator is the most compact of all the bus-compatible position indicators from Siko. As the successor to the AP04, the AP05 offers the same space-saving dimensions, as well as being attachment compatible allowing quick and easy attainment of the target position. A significant new element of the AP05 – an inverted, backlit LCD display – has been integrated for this reason. The lighting ensures that the values for the target and actual position are maximally legible, even in low light conditions.
Intuitive operation
Along with the LCD directional arrow, the AP05 position indicator also offers intuitive user guidance via the right and left status LEDs, both integrated into the case and in two colours. These not only signal positional status (InPos or OutPos) but also simultaneously indicate the required rotational direction.
Increased robustness
The AP05’s mechanical robustness has also been significantly improved with the help of a carbon fibre reinforced case and protective cover for the display. Thus, the indicator is also usable in areas where mechanical strain on the connector plug and case or impacts to the display cannot be ruled out. Because the connector plug is also available with an optional cable outlet, the position indicator can be flexibly deployed in constrained spaces.
Flexible network integration
The bus compatible AP05 position indicator can be equipped with either an RS-485 or a CAN interface. The network integration is also fully compatible with the AP04 predecessor, as well as with further bus-compatible Siko position indicators in the current generation – AP10, AP10S, and AP10T. With the use of additional interface converters, the AP05 can be integrated into a wide range of fieldbus and Ethernet networks including Profibus-DP, Profinet I/O, Ethernet/IP, EtherCAT, and Powerlink.
As with all Siko position indicators, the AP05 also features a hollow shaft, guaranteeing the easiest assembly possible for standard adjustable axles. Despite its ultra-compact design, it can accommodate spindle shafts up to 20 mm in diameter. With regard to the size and clearance of the torque reaction support, it also features attachment compatibility with not only the AP04 but also with the DA04 mechanical position indicator. Thus, the machine’s frame can be switched from manual adjustment with mechanical position indicator to monitored format adjustment with the AP05 – no changes necessary. Due to the high degree of protection afforded by IP65 and the use of stainless steel, the AP05 is well suited to applications in the fields of food production, drinks manufacturing, or pharmaceuticals.
Market opportunity for sensors in humanoid robots
Sensors & Transducers
A new IDTechEx report forecasts the market for sensors in humanoid robots will exceed $6,59 billion by 2037, driven by perception sensors, force/torque sensors, encoders and inertial measurement units across a growing range of commercial robot platforms.
Read more...The wireless route to safer, more efficient mining operations Emerson Automation Solutions
Editor's Choice Sensors & Transducers
Modern wireless level measurement technologies are helping mining operations improve process control, increase safety and reduce installation costs. Emerson’s Rosemount 3408 wireless non-contacting radar level transmitter uses 80 GHz frequency-modulated continuous wave radar with HART communication to reach remote assets where cabling is impractical.
Read more...Telco sensors for harsh environments
Sensors & Transducers
Telco sensors are designed to operate where moisture, particulate contamination and surface fouling would disable conventional sensors, with a range including an adjustable five-metre infrared proximity sensor for harsh industrial environments.
Read more...The data-driven path to sustainable manufacturing ifm - South Africa
Editor's Choice Sensors & Transducers
Smart automation is closing the gap between operational efficiency and environmental responsibility, and the data to do it is already inside the plant. With ifm’s sensing and digitalisation technologies, manufacturers can turn machine intelligence into measurable sustainability gains.
Read more...Expanding visibility in mining operations Emerson Automation Solutions
Editor's Choice Sensors & Transducers
Advances in wireless communications, condition monitoring and sensing technologies are helping mining operators extend measurement into previously under-monitored areas, improving equipment reliability, process performance and water stewardship.
Read more...Fiber-optic amplifiers for precise object detection ifm - South Africa
Sensors & Transducers
The OCF fibre-optic amplifier detects even the smallest or most transparent objects in confined spaces, making proven fibre-optic technology easier and more user-friendly than before.
Read more...Distance sensor for confined spaces ifm - South Africa
Sensors & Transducers
The O6D100 from ifm has been designed as a powerful all-rounder for typical applications in object detection, distance measurement and positioning.
Read more...Optimise sludge treatment and reduce operational costs Endress+Hauser South Africa
Sensors & Transducers
Endress+Hauser’s inline measuring devices, the Proline Teqwave MW 300 and the Proline Teqwave MW 500, determine the total solids content of wastewater directly through microwave transmission.
Read more...Inclination sensors for motion control ifm - South Africa
Sensors & Transducers Motion Control & Drives
The JBC dynamic inclination sensor from ifm offers accurate angle measurement in the most demanding conditions, filtering out motion disturbances such as vibrations, shocks and vehicle dynamics to deliver reliable inclination values via IO-Link or programmable switch outputs.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version