Tectra Automation supplies handling systems for Iveco assembly plant
January 2016
News
Tectra Automation recently supplied two Schmalz vacuum handling systems to Iveco South Africa’s bus manufacturing facility in Rosslyn, Pretoria. The handling systems will lift and transport the roof and side panels for assembly and fitment onto the buses assembled at the plant.
Both systems consist of 150 mm silicon bellows cups, together with slide valves, tubing and a Schmalz EVE-TR40 vacuum pump. An additional safety system was implemented on each of the systems to warn operators of a loss in vacuum in the event of a power failure.
The roof panel handling system is used to transfer the parts from the storage pack to a workstation where they are prepared for assembly. Once completed, the system transports and places the finished panels onto the bus. 10 bellows cups are positioned over the entire length of the 14 m long, 2,8 m wide roof panels. These panels weigh approximately 200 kg.
Because of the rough side of the roof panel, the cups had to be capable of adapting to the uneven surface. This surface also required a vacuum pump that could provide a high airflow to compensate for the slight leakage resulting from the uneven surface.
The side panels are lifted from the storage rack in a vertical orientation, and transported to the bus for attachment. Tectra Automation designed and supplied the aluminium frame to house the vacuum components using Bosch Rexroth aluminium extrusions. The side panels are 11 m long, 1,5 m wide and weigh 180 kg, and are gripped by a system consisting of 22 bellows cups. As stipulated by Iveco, the system has been designed to accommodate a 15 m long panel in the future.
Through extensive expertise in the field of vacuum technology and system design, Tectra Automation provided a solution that is tailored to the handling requirements of the Iveco operation, which was achieved with maximum efficiency and safety.
The new system was installed and commissioned within two days.
For more information contact Malan Bosman, Tectra Automation, +27 (0)11 974 9400, [email protected], www.hytecgroup.co.za
Further reading:
Helping mines get results from water improvements
News
South African mines operate under constrained, water-scarce conditions where every investment must be justified. Xylem’s Chetan Mistry explains how the right water technology partner helps mines prioritise high-value water systems across the mining lifecycle.
Read more...
From solar to water, onsite plants are the next big industrial resilience shift
News
South African industrial operators who secured their energy supply with onsite solar generation now face the same imperative with water. Robert Erasmus of Sanitech argues that onsite water treatment is the next essential pillar of business continuity.
Read more...
From the editor's desk: Pushing engineering to the limit
Technews Publishing
News
Among the many things robots can do, it’s a lot of fun to follow how fast they are. They go from the Boston Dynamics cheetah, which first reached a record-breaking speed of 45,5 km/h, to the robot Charlie
...
Read more...
Schneider Electric concludes Innovation Summit Middle East and Africa
Schneider Electric South Africa
News
Schneider Electric's Innovation Summit Middle East and Africa, held in Abu Dhabi with more than 2500 attendees, explored the convergence of energy, AI and industrial software, launched an Industrial AI study and announced the NEST Accelerator Programme for energy and industrial tech startups.
Read more...
VEGA brings measurement expertise beyond mining to Electra Mining Africa 2026
VEGA Controls SA
News
VEGA used its Electra Mining Africa 2026 stand to demonstrate that its level and pressure measurement instruments extend well beyond mining, covering water, food and beverage, pharmaceuticals, chemicals, and oil and gas applications across the continent.
Read more...
Sustainable solutions for sugar
Bearing Man Group t/a BMG
News
BMG received a Special Commendation Exhibition Stand Award at the South African Sugar Technologists’ Association Congress, where it showcased an integrated turnkey drive solution designed to simplify the upgrading of ageing crushing-mill drive systems.
Read more...
Measure, Manage, Maintain: The operating model behind SA’s water resilience
Siemens South Africa
News
South Africa’s growing water crisis is putting pressure on infrastructure, municipalities and the economy. Siemens highlights how digital technologies, smarter operations and safe water reuse could help shift the country from crisis response towards a more resilient and sustainable water future.
Read more...
VEGA brings measurement expertise beyond mining to Electra Mining Africa 2026
VEGA Controls SA
News
VEGA used its Electra Mining Africa 2026 stand to demonstrate that its level and pressure measurement instruments extend well beyond mining, covering water, food and beverage, pharmaceuticals, chemicals, and oil and gas applications across the continent.
Read more...
Schneider Electric concludes Innovation Summit Middle East and Africa
Schneider Electric South Africa
News
Schneider Electric’s Innovation Summit Middle East and Africa, held in Abu Dhabi with more than 2500 attendees, explored the convergence of energy, AI and industrial software, launched an Industrial AI study and announced the NEST Accelerator Programme.
Read more...
RX Africa and Messe Muenchen India join forces to strengthen business platforms in Africa
RX Africa
News
Messe Muenchen India has announced a strategic partnership with RX Africa to strengthen the scale, reach and market impact of its premier co-located trade fairs, analytica Lab Africa and IFAT Africa, ahead of their 2027 editions.
Read more...
printer friendly version