The Mitech steam conditioning valve is a modular system which can contain a combination of cavitation control steam atomising de-superheater nozzles.
The design incorporates an angle-style body that allows for substantial differences in inlet and outlet, both in terms of size and pressure rating. It is also primarily designed to incorporate the Mitech twister trim, flowing from the inside outwards for maximum efficiency of space utilisation. The body is further designed to have a large annulus around the stack, such that even relatively high trim exit velocities cannot cause significant erosion damage to the body. However, the plug configuration is such as to give the best possible shut-off with the smallest possible actuator.
Furthermore, the plug is guided by the trim, and the trim and plug are designed to have a relatively long stroke, thereby maximising the turndown of the system.
The de-superheater nozzle is fitted to the centre of the valve outlet in an area of highly turbulent flow, to minimise the risk of water impinging on either the valve body or downstream pipework.
The moment the valve is cracked open, steam is introduced to the de-superheater nozzle at full upstream pressure, in order to maximise the atomisation of the cooling water. The water supply to the de-superheater is arranged in such a way that the valve body is not in contact with the cooling water, thereby removing the risk of thermal cracking caused by severe temperature gradients. In fact the only component that is simultaneously in contact with both water and steam is the de-superheater nozzle itself.
Miniature inductive sensors ifm - South Africa
Sensors & Transducers
The inductive IY/IZ type sensors from ifm are used in various industrial areas where space is limited.
Read more...PDS implementation on mines
Sensors & Transducers
Level 9 vehicle intervention for collision avoidance has been mandatory on South African mines since 2022, yet the effective roll-out of proximity detection systems remains slower than expected. This is not due to the technical limitations of integration but to operational readiness on site.
Read more...Monitoring analogue process values ifm - South Africa
Sensors & Transducers
Everywhere in industry, electronic sensors are used to detect process values such as temperature, pressure or flow. Process value monitoring often takes place directly in the sensor.
Read more...Protecting buildings’ embodied carbon with retrofitted systems Schneider Electric South Africa
Sensors & Transducers
The World Economic Forum has said that around 80% of the buildings in existence will still be around in 2050; it is therefore essential that in order to combat climate change we retrofit them for energy efficiency.
Read more...Listening for damage to wind turbines
Sensors & Transducers
The Fraunhofer Institute for Integrated Circuits, working in concert with the Fraunhofer Institute for Wind Energy Systems, has developed a solution that can be used to identify cracks and breakage inside wind turbine blades remotely at an early stage.
Read more...Enhancing gold leaching efficiency Endress+Hauser South Africa
Sensors & Transducers
Endress+Hauser offers a range of advanced technologies designed to enhance the stability and accuracy of pH and dissolved oxygen measurements on gold processing plants.
Read more...Powering safer mining with PDS
Sensors & Transducers
With the mining industry under increasing pressure to prioritise safety without compromising productivity, Booyco Electronics is pushing the boundaries of Proximity Detection System and Collision Avoidance System technology across both underground and surface operations.
Read more...The car of the future listens
Sensors & Transducers
The perception of external sounds in cars has been lacking, even in automated driving. That is why Fraunhofer IDMT-HSA is researching the integration of acoustic sensor technology in its KI4BoardNet project with the Hearing Car.
Read more...High-performance LineScan camera
Sensors & Transducers
Lynred, a global leader in infrared imaging technologies, has launched its next-generation SWIR LineScan camera and sensor, specifically designed for the inspection of silicon wafers, solar panels and waste management.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version