September 2001Maintenance, Test & Measurement, Calibration
Rockwell Automation is offering the Allen-Bradley Bulletin 844D blind-shaft and through-shaft incremental encoders. These devices can be mounted directly to the monitored shaft via a split collar clamp on the encoder, eliminating the need for mounting plates and flexible couplings.
As a result of the direct mounting overall cost and size are reduced considerably. With this encoder, the length of the motor shaft becomes noncritical, as long as it meets the minimum length of 18 mm (blind shaft models support a maximum 50 mm shaft length). Through-shaft models are installed by inserting the monitored shaft completely through the encoder, while blind-shaft models only require insertion of the end of the shaft. Shaft position is converted to digital pulses in an 'A quad B' format.
An important feature of the 844D is its high frequency response: 300 kHz for line drivers up to 8192 PPR, and 600 kHz above 8192 PPR. This allows both high resolution (10 000 and 16 384 PPR) and high shaft speed (over 2000 RPM at 16 384 PPR).
Noteworthy features include:
* A zero index channel is included with all models.
* Blind-shaft and through-shaft front coupled models.
* Mounting plate and flexible coupling not required.
* 360 to 16 384 PPR (pulses per revolution)
* 89 mm (3,5") diameter housing.
* Supports 1/2 to 11/8" diameter shafts.
* Cable, connector or terminal block connection options.
Automatic lubrication systems drive mobile mine machine reliability and uptime SKF South Africa
Maintenance, Test & Measurement, Calibration
SKF’s Lincoln P203 progressive lubrication systems are improving reliability and uptime on mobile machines at a Zambian gold mine, with installation of 45 units completing by October 2026.
Read more...Nitration: the acid you didn’t see coming Wearcheck
Maintenance, Test & Measurement, Calibration
Nitration is as destructive as oxidation in many engines but far less understood. WearCheck technical manager, Steven Lumley explains how nitrogen oxide gases degrade lubricants, why the process is difficult to detect, and what oil analysis can reveal before damage occurs.
Read more...KSB makes mechanical seals for its own pumps and other brands
Maintenance, Test & Measurement, Calibration
KSB Pumps and Valves is expanding its range of mechanical seals to fit its own pumps and competitor brands. The portfolio covers component and cartridge seals, API 682-compliant systems, slurry and high-pressure seals, and ATEX-certified solutions, supported by refurbishment and field service capabilities.
Read more...Omniflex delivers ICCP systems in London Omniflex Remote Monitoring Specialists
Maintenance, Test & Measurement, Calibration
Omniflex has supplied impressed current cathodic protection systems for landmark London buildings, protecting reinforced concrete from corrosion and extending the service life of commercial, retail and heritage sites.
Read more...Modernising acid cooler protection without disrupting production Omniflex Remote Monitoring Specialists
Maintenance, Test & Measurement, Calibration
Omniflex has supplied an advanced anodic protection control system to phosphate producer Foskor, replacing a legacy transformer rectifier system while maintaining uninterrupted production. The distributed PowerView CP solution provides remote monitoring and DCS integration.
Read more...Improving material handling with autonomous mobile robots Rockwell Automation
Motion Control & Drives
Autonomous mobile robots offer flexible, AI-driven material handling that adapts to shifting demand, fills labour gaps, and generates the operational data needed to optimise end-to-end facility performance.
Read more...Engineering partnership delivers longer life for vibrating feeders in mining
Maintenance, Test & Measurement, Calibration
OST-Africa’s combination of VISAM vibrating motors and advanced rubber mounting technology has helped Euro Sales achieve a 30 to 40% increase in component life on vibrating feeders at several major mining operations, with zero mount failures in the first 12 months.
Read more...When oil can’t take the heat Wearcheck
Maintenance, Test & Measurement, Calibration
Unlike the slow ageing of oxidation, thermal breakdown is the sudden chemical collapse of a lubricant under excessive heat. Steven Lumley of WearCheck explains how it happens, where it strikes, and how oil analysis detects it.
Read more...Mini data loggers for temperature and humidity monitoring
Maintenance, Test & Measurement, Calibration
Testo’s range of four compact data loggers covers temperature and humidity monitoring for storage, refrigeration and transport applications, with USB-C or Bluetooth connectivity and capacity for up to 16 000 readings.
Read more...Alternative fuels for cutting, brazing, soldering and heating
Maintenance, Test & Measurement, Calibration
Bolt and Engineering Distributors, as an authorised distributor for the Harris Products Group, is helping South African industries transition from acetylene to safer, more cost-effective alternative fuels for cutting, brazing, soldering and heating applications.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version