Level Measurement & Control


Reliable radar level measurement

December 2013 Level Measurement & Control

Since the successful launch of the Micropilot radar level device more than 20 years ago, Endress+Hauser has installed more than 300 000 radar instruments in a wide range of applications across the globe. The company has now launched the new Micropilot FMR5x range with improved reliability of signal analysis and a new data management system for quick and easy information sharing and replacement.

Designed for use in the chemicals, oil and gas, life sciences, food, water and energy industries, the Micropilot FMR5x range includes the FMR50 (liquids) and FMR56 (solids) for use in basic applications, right through to the FMR51 (liquids) and FMR57 (solids) for use in high pressure or high temperature processes.

The innovative multi-echo tracking system overcomes the problem of obstacles in the radar beam, for example installed instruments or heating coils, that can interfere with the signal and give false readings. This improved method of analysing signals means that obstacles are marked and tracked along with the level, guaranteeing accurate measurements to within 2 mm.

Another advantage of the new radar instrument is the HistoROM data management function that allows fast and easy commissioning, maintenance and diagnostics. As well as continuously backing up all relevant data, it allows main electronics to be quickly and simply replaced by hand. The instrument also offers intuitive and user-friendly menu guidance, reducing the cost of training, maintenance and operation.

Safety is always a top priority at Endress+ Hauser. The hardware and software comply with IEC 61508 and can be used in homogeneous redundancy up to SIL3. In practice this means that Micropilot always checks that it is working properly and safely by continuous self-monitoring. Two instruments are used at the same measuring point and if one of the two detects an unsafe condition, the instrument changes to an alarm condition. This reduces the risk of an unsafe process condition going unnoticed. As an extra safety net, the recurring check or proof test can be started easily either by attaching an engineering tool or directly from the control room, ensuring the instrument maintains its reliability.

For more information contact Jan Gerritsen, Endress+Hauser, +27 (0)11 262 8000, [email protected], www.za.endress.com



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

A fresh approach to dairy processing
VEGA Controls SA Level Measurement & Control
Ensuring the quality and safety of milk throughout the production process is of the utmost importance in the dairy industry. The VEGABAR pressure transmitters are suitable for hygienic applications. They are an asset in the dairy industry and have been used with success for measuring the milk level and the process pressure in storage tanks.

Read more...
Keeping a close eye on product quality and purity
Endress+Hauser South Africa Sensors & Transducers
Colour measurements are necessary in many processes to avoid product losses and ensure safe production and batching. The Memosens Wave CKI50 process spectrometer from Endress+Hauser is a compact, robust and process-friendly device allowing quality, batching and phase checks to be performed by a single instrument for the entire visible colour spectrum.

Read more...
Where simplicity meets reliability
Endress+Hauser South Africa Temperature Measurement
The new iTEMP TMT31 temperature transmitter from Endress+Hauser combines simplified selection, ordering, installation and operation with the highest reliability and long-term stability in one product.

Read more...
Simple and efficient level measurement in the mining, minerals and metals industries
Endress+Hauser South Africa Editor's Choice Level Measurement & Control
Measuring devices in the mining, minerals and metals industries face the challenge of varying material states and long distances in measurement height. Endress+Hauser’s answer to these challenges is the new Micropilot family.

Read more...
Level measurement of an acid dosing tank at a WWTP
Level Measurement & Control
Ferric chloride and other acids are essential chemical substances in water and wastewater treatment. To control the dosing of acid solutions, an Australian wastewater treatment plant uses a special container to store, mix and add these chemicals. The company opted in favour of KROHNE’s OPTIWAVE 1540 radar level transmitter

Read more...
Powering sub-Saharan Africa’s energy future
VEGA Controls SA Level Measurement & Control
Crude oil storage plays an important role in the energy infrastructure of sub-Saharan Africa. The management of crude oil storage in comes with numerous challenges, including safety concerns, environmental conditions and infrastructural limitations.

Read more...
A new era in radiometric level and density measurement
Mecosa Level Measurement & Control
The LoopSeries LB 430 radiometric detector from Berthold Technologies has a revolutionary power solution and sets new standards in level and density measurement.

Read more...
Enhancing process efficiency
Endress+Hauser South Africa Fieldbus & Industrial Networking
In the ever-evolving landscape of industrial process automation, staying ahead of technological advancements is crucial. The Endress+Hauser FieldPort SWA50 is a game-changer, offering a seamless integration of Bluetooth and WirelessHART communication for HART field devices.

Read more...
Level measurement of leachate from sewage sludge humification
Level Measurement & Control
A municipal utility in eastern Germany operates a state-of-the-art wastewater treatment plant with sustainable sludge treatment. The ultrasonic signal was being partially deflected by the wind, leading to frequent false measurements and inefficient process workflows. The problem was solved by replaced the ultrasonic level sensor with KROHNE’s OPTIWAVE 1540 non-contact radar.

Read more...
Groundbreaking measurement system
Mecosa Level Measurement & Control
Berthold Technologies has launched the LoopSeries LB 430, an innovative, industry-leading measurement system designed to enhance operational efficiency with advanced level, density, and level switch capabilities.

Read more...