Honeywell to modernise Nordics' largest refinery
1 November 2013
PLCs, DCSs & Controllers
Honeywell announced that it has been selected by Preem AB to modernise one of Europe’s largest refineries – Preemraf Lysekil – with Honeywell’s Enhanced High Performance Process Manager (EHPM) industrial process controllers.
The project should significantly extend the life of the existing control system at the refinery, located in southern Sweden. Preem AB, the country’s largest oil producer, will use the enhanced high performance process manager to as much as triple the capacity of the refinery’s existing controllers.
Preem AB has an annual refining capacity of more than 18 million metric tons, accounting for 75% of refining capacity in Sweden and about one-third of the entire Nordic region. Preem AB is the largest supplier of ultra-low-sulphur diesel fuel in Sweden, with a sulphur content of less than 5 ppm (parts per million), significantly lower than the Euro 4 requirement of 50 ppm.
“Honeywell’s Enhanced High Performance Process Manager enables Preem to modernise their refinery and increase through-put while maximising legacy investments and intellectual property,” said John Rudolph, vice president for Honeywell Process Solutions’ Lifecycle Solutions and Services business.
The upgrade will be completed during planned maintenance at the refinery and will not require any additional downtime. It is scheduled to be completed before the end of the year.
“This investment builds on Lysekil’s position as the region’s leading refinery and will deliver real benefits for decades,” said Lars Andersson, automation manager at Preem AB. “It also means we can maintain and improve on a safe, efficient operation, without the disruption and cost of ripping out and replacing the entire control system.”
With support for peer-to-peer communication planned for the future, EHPM will allow Preem to incorporate other technologies from Honeywell, to provide an integrated solution that can include continuous and batch processing controls such as Experion C300, safer operations with Safety Manager, and Honeywell’s fault tolerant Ethernet FTE technology, that offers more robust, faster network diagnostics and improved security.
For more information about Honeywell’s lifecycle solutions for process automation please visit www.honeywellprocess.com
Further reading:
Loop signature Part 2-6
PLCs, DCSs & Controllers
This instalment of the Loop Signature series introduces frequency plot theory as a foundation for understanding process dynamics, explaining Bode plots, dynamic gain, phase lag and their relationship to control loop tuning.
Read more...
The rise of software-defined brownfield automation
Schneider Electric South Africa
PLCs, DCSs & Controllers
Schneider Electric’s EcoStruxure Automation Expert is enabling brownfield operators to modernise incrementally, decoupling control logic from hardware to bridge legacy equipment and future-ready operations without disrupting production.
Read more...
Upgrading alarm systems for critical industries
Omniflex Remote Monitoring Specialists
PLCs, DCSs & Controllers
Omniflex’s OMNI16R alarm annunciator platform provides a direct replacement for legacy CSA systems such as MPAS 90 and SA9100, enabling operators in oil and gas, nuclear and power generation to modernise alarm infrastructure without sacrificing the clarity required for safe operations.
Read more...
How DCS can step off the hardware obsolescence treadmill
Schneider Electric South Africa
PLCs, DCSs & Controllers
Schneider Electric argues that virtualising DCS environments breaks the cycle of hardware obsolescence, giving plant operators a smarter path to lifecycle modernisation without production disruption.
Read more...
Loop signature Part 2-6
PLCs, DCSs & Controllers
The Loop Signature series turns to frequency plot theory, explaining Bode open-loop plots and how dynamic gain, phase lag and crossover frequency can be extracted from test data to inform more accurate control loop tuning.
Read more...
PC-based control in surgery
Beckhoff Automation
Editor's Choice PLCs, DCSs & Controllers
Researchers at the University of Basel are using Beckhoff PC-based control technology to develop a miniature laser robot for minimally invasive bone surgery.
Read more...
IIoT controller for the field and control cabinet
ifm - South Africa
PLCs, DCSs & Controllers
The IIoT controller from ifm is a powerful, communicative and flexible PLC solution in machine and plant digitalisation.
Read more...
How the DCS can step off the hardware obsolescence treadmill
Schneider Electric South Africa
PLCs, DCSs & Controllers
Ageing servers and unsupported operating systems are quietly eroding the stability of process plants that rely on distributed control systems. Kobus Vermeulen of Schneider Electric explains how virtualising the DCS environment can break the hardware obsolescence cycle without disrupting operations.
Read more...
Centralised control rooms where growth is elastic, not physical
Schneider Electric South Africa
PLCs, DCSs & Controllers
Modernised control rooms feature distributed control system architecture consolidated into centralised compute environments. replacing traditional PCs with thin clients.
Read more...
Advanced DCSs preserve what must not change while enabling
Schneider Electric South Africa
PLCs, DCSs & Controllers
Next-generation DCSs, such as Schneider Electric’s Foxboro, are preserving the best of the old while introducing the new in a less disruptive manner.
Read more...
printer friendly version