Noncontact thickness gauge for uncured powder coatings
August 2001Maintenance, Test & Measurement, Calibration
Elcometer Instruments, specialists in coating process quality control for over fifty years, has a new powder coating thickness gauge the Elcometer 550. Using a novel, patented ultrasonic measurement principle, the Elcometer 550 is a noncontact coating thickness gauge calibrated to measure all uncured polyester and mixed powder coatings applied to a range of smooth metal substrate materials such as aluminium and steel.
Significant savings on powder usage, in the order of 10-30%, can be achieved by using this gauge to measure the thickness of the powder immediately after spraying and before the coating is cured. Product wastage, due to thin coating application, can be minimised and excess coating thickness and the resultant high material usage is prevented. With these high levels of material-saving the cost of the gauge can very quickly be recovered.
The gauge is handheld and fully portable, weighing only 1,6 kg. With its pistol-style probe it is easy and convenient to use. Powered by an interchangeable rechargeable battery and sealed against dust ingress, the Elcometer 550 can be used to measure on the powder coating line immediately next to the spray booth. A fully charged battery pack has capacity for over 300 measurements and it is charged externally to the gauge to maximise the time that the gauge can be in use. A spare pack is supplied with the kit as standard so that one pack can be charged while the other pack is being used.
The Elcometer 550 has a measurement range of 30-110 mm and a display resolution of 1 mm over this range of thickness. The accuracy of measurement is ±5 µm. The probe is held 17 mm off the surface to be measured with distance and energy indicators on the probe handle to aid the operator to align the probe with the surface to be measured. The operator initiates the measurement sequence and when the probe is correctly aligned the measurement count starts automatically until the user stops the sequence.
The gauge is so easy to use that measurements can be taken on coated parts as they move past the measurement station on the conveyer system toward the oven. The probe measures over an area of approximately 1 mm diameter so the system is suitable for relatively small parts.
The gauge has the additional features expected for a modern electronic measuring system such as RS232 data output for communication with a computer, average reading display and pre-set limits with alarm for both high and low coating thicknesses.
Automatic lubrication systems drive mobile mine machine reliability and uptime SKF South Africa
Maintenance, Test & Measurement, Calibration
SKF’s Lincoln P203 progressive lubrication systems are improving reliability and uptime on mobile machines at a Zambian gold mine, with installation of 45 units completing by October 2026.
Read more...Nitration: the acid you didn’t see coming Wearcheck
Maintenance, Test & Measurement, Calibration
Nitration is as destructive as oxidation in many engines but far less understood. WearCheck technical manager, Steven Lumley explains how nitrogen oxide gases degrade lubricants, why the process is difficult to detect, and what oil analysis can reveal before damage occurs.
Read more...KSB makes mechanical seals for its own pumps and other brands
Maintenance, Test & Measurement, Calibration
KSB Pumps and Valves is expanding its range of mechanical seals to fit its own pumps and competitor brands. The portfolio covers component and cartridge seals, API 682-compliant systems, slurry and high-pressure seals, and ATEX-certified solutions, supported by refurbishment and field service capabilities.
Read more...Omniflex delivers ICCP systems in London Omniflex Remote Monitoring Specialists
Maintenance, Test & Measurement, Calibration
Omniflex has supplied impressed current cathodic protection systems for landmark London buildings, protecting reinforced concrete from corrosion and extending the service life of commercial, retail and heritage sites.
Read more...Modernising acid cooler protection without disrupting production Omniflex Remote Monitoring Specialists
Maintenance, Test & Measurement, Calibration
Omniflex has supplied an advanced anodic protection control system to phosphate producer Foskor, replacing a legacy transformer rectifier system while maintaining uninterrupted production. The distributed PowerView CP solution provides remote monitoring and DCS integration.
Read more...Engineering partnership delivers longer life for vibrating feeders in mining
Maintenance, Test & Measurement, Calibration
OST-Africa’s combination of VISAM vibrating motors and advanced rubber mounting technology has helped Euro Sales achieve a 30 to 40% increase in component life on vibrating feeders at several major mining operations, with zero mount failures in the first 12 months.
Read more...When oil can’t take the heat Wearcheck
Maintenance, Test & Measurement, Calibration
Unlike the slow ageing of oxidation, thermal breakdown is the sudden chemical collapse of a lubricant under excessive heat. Steven Lumley of WearCheck explains how it happens, where it strikes, and how oil analysis detects it.
Read more...Mini data loggers for temperature and humidity monitoring
Maintenance, Test & Measurement, Calibration
Testo’s range of four compact data loggers covers temperature and humidity monitoring for storage, refrigeration and transport applications, with USB-C or Bluetooth connectivity and capacity for up to 16 000 readings.
Read more...Alternative fuels for cutting, brazing, soldering and heating
Maintenance, Test & Measurement, Calibration
Bolt and Engineering Distributors, as an authorised distributor for the Harris Products Group, is helping South African industries transition from acetylene to safer, more cost-effective alternative fuels for cutting, brazing, soldering and heating applications.
Read more...Rethinking corrosion protection in process plants Omniflex Remote Monitoring Specialists
Maintenance, Test & Measurement, Calibration
Remote monitoring is changing how cathodic and anodic protection systems are managed in process plants, giving operators continuous visibility of corrosion protection performance and enabling more proactive maintenance decisions.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version