Level Measurement & Control


Point level detection from Endress+Hauser

February 2013 Level Measurement & Control

Gammapilot FTG20 is the latest instrument from Endress+Hauser for point level detection. It combines all of the strengths of the brand – uncompromising quality, the highest degree of safety for users, more efficient processes and substantial cost savings over the entire life cycle. Based on Geiger-Müller technology, the Gammapilot FTG20 has the highest measurement sensitivity in its class for the automation industry. It reflects 50 years of competence in radiometric measurement engineering in one instrument.

Highest degree of flexibility due to a sophisticated design

The Gammapilot FTG20 consists of two separate units: a detector which contains one to three Geiger-Müller counter tubes and a transmitter. The latter first converts the measured value into a switching command and then provides the switching in the form of a relay or an 8/16 mA output. Both units (detector and transmitter) are connected via a cable which is available in lengths of 5, 10 or 20 metres. This guarantees the highest degree of flexibility on installation.

Complete safety

The device features a modular design and can therefore be used with one, two or even three Geiger-Müller counter tubes with very high sensitivity. In addition, the device fits perfectly into any application and can reach very low radiation values, even in a short switching time of 0,4 seconds.

The separate transmitter provides additional safety. Installation staff can commission the instrument without being exposed to the radiation path as there is less radiation than in conventional radiometric point level detectors.

Cost savings over the entire life cycle

The Gammapilot FTG20 uses the HistoROM concept which has already been tried and tested in other product lines. The ease of installation and commissioning made possible by the separate housing concept provide cost savings over its entire life cycle. The HistoROM system provides self-monitoring of electronics and all data relevant to the operation of the instrument is cyclically stored. This makes recalibration superfluous if the electronics are changed. Normal decay is compensated for in the software. The decline in radiation activity due to ageing is of no consequence as the isotope is stored in the HistoROM system.

Reliability in rough environments

The Gammapilot FTG20 was developed for applications in the chemical, oil and gas, primaries and paper industries. Both stainless steel and aluminium housings are available. In addition, explosion protection approvals for gas and dust Ex-areas (ATEX 2G, ATEX 2D, CSA, IECEx) are provided. Even the roughest environmental conditions are mastered by the Gammapilot FTG20 without any problems. For example, it meets protection classes up to IP66/68 or TYPE 4X/6P and is designed for ambient temperatures between -40 and +120°C.

For more information contact Jan Gerritsen, Endress+Hauser, +27 (0)11 262 8000, [email protected], www.za.endress.com



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

A fresh approach to dairy processing
VEGA Controls SA Level Measurement & Control
Ensuring the quality and safety of milk throughout the production process is of the utmost importance in the dairy industry. The VEGABAR pressure transmitters are suitable for hygienic applications. They are an asset in the dairy industry and have been used with success for measuring the milk level and the process pressure in storage tanks.

Read more...
Keeping a close eye on product quality and purity
Endress+Hauser South Africa Sensors & Transducers
Colour measurements are necessary in many processes to avoid product losses and ensure safe production and batching. The Memosens Wave CKI50 process spectrometer from Endress+Hauser is a compact, robust and process-friendly device allowing quality, batching and phase checks to be performed by a single instrument for the entire visible colour spectrum.

Read more...
Where simplicity meets reliability
Endress+Hauser South Africa Temperature Measurement
The new iTEMP TMT31 temperature transmitter from Endress+Hauser combines simplified selection, ordering, installation and operation with the highest reliability and long-term stability in one product.

Read more...
Simple and efficient level measurement in the mining, minerals and metals industries
Endress+Hauser South Africa Editor's Choice Level Measurement & Control
Measuring devices in the mining, minerals and metals industries face the challenge of varying material states and long distances in measurement height. Endress+Hauser’s answer to these challenges is the new Micropilot family.

Read more...
Level measurement of an acid dosing tank at a WWTP
Level Measurement & Control
Ferric chloride and other acids are essential chemical substances in water and wastewater treatment. To control the dosing of acid solutions, an Australian wastewater treatment plant uses a special container to store, mix and add these chemicals. The company opted in favour of KROHNE’s OPTIWAVE 1540 radar level transmitter

Read more...
Powering sub-Saharan Africa’s energy future
VEGA Controls SA Level Measurement & Control
Crude oil storage plays an important role in the energy infrastructure of sub-Saharan Africa. The management of crude oil storage in comes with numerous challenges, including safety concerns, environmental conditions and infrastructural limitations.

Read more...
A new era in radiometric level and density measurement
Mecosa Level Measurement & Control
The LoopSeries LB 430 radiometric detector from Berthold Technologies has a revolutionary power solution and sets new standards in level and density measurement.

Read more...
Enhancing process efficiency
Endress+Hauser South Africa Fieldbus & Industrial Networking
In the ever-evolving landscape of industrial process automation, staying ahead of technological advancements is crucial. The Endress+Hauser FieldPort SWA50 is a game-changer, offering a seamless integration of Bluetooth and WirelessHART communication for HART field devices.

Read more...
Level measurement of leachate from sewage sludge humification
Level Measurement & Control
A municipal utility in eastern Germany operates a state-of-the-art wastewater treatment plant with sustainable sludge treatment. The ultrasonic signal was being partially deflected by the wind, leading to frequent false measurements and inefficient process workflows. The problem was solved by replaced the ultrasonic level sensor with KROHNE’s OPTIWAVE 1540 non-contact radar.

Read more...
Groundbreaking measurement system
Mecosa Level Measurement & Control
Berthold Technologies has launched the LoopSeries LB 430, an innovative, industry-leading measurement system designed to enhance operational efficiency with advanced level, density, and level switch capabilities.

Read more...