Control module for Namur sensors

September 2012 Operator Interfaces, Switches & Relays

The Rhomberg SC301 control module for Namur sensors converts the low current signal of the sensor into a relay switching action. It works with either the inductive or the capacitive Namur sensors that are also part of the Rhomberg range. By monitoring the current flow of the sensor, it detects cable faults and open circuit conditions, making the unit fail-safe. The three LEDs on the front of the unit indicate target sensing, cable fault and relay output.

Rhomberg Electronic products are manufactured in Cape Town and exported worldwide. Conforming to the DIN 19234 standard, the SC301 control module is the only locally manufactured product to be approved by the SABS for use in intrinsically safe applications (EXIB) GR 2C, T6. This makes it ideal for hazardous areas where proximity switches are required, particularly in the petrochemical and fertiliser industries where dangerous and flammable gases occur. The Namur sensor is positioned in the hazardous area and is connected by two wires to the SC301, which is mounted in a safe area or flameproof enclosure.

Further reading:

High-efficiency switching solutions
Operator Interfaces, Switches & Relays
Becker Mining South Africa has launched a new-generation energy distribution system that has been specially developed to enhance productivity and safety in the challenging conditions of local underground coal mines.

Read more...

---

World-first solution for platinum miner
ABB South Africa Operator Interfaces, Switches & Relays
When a consulting engineering company approached ABB about a specific problem that its platinum mining client was experiencing at its smelter facility in the North West Province, it was an opportunity for the technology provider to showcase its innovation and adaptability in responding to specific customer requirements.

Read more...

---

Robust industrial relays
Vepac Electronics Operator Interfaces, Switches & Relays
Industrial RT relays from Vepac are particularly robust and are used for high load control. RT modules can control up to three changeover contacts, with 10 A each. In addition, this product is equipped for safety reasons with manual operation, improved LEDs or free-wheeling diodes.

Read more...

---

Pick-to-light device with added flexibility
Turck Banner Southern Africa Operator Interfaces, Switches & Relays
Pick-to-light devices and systems help industrial automation manufacturers reduce the risk of error in the assembly process, ensuring product quality and reducing cost. These devices are also used in kitting and put-to-light operations to ensure high accuracy in fulfilment operations.

Read more...

---

Protection relays – control what you can
Schneider Electric South Africa Operator Interfaces, Switches & Relays
With municipalities’ distribution centres and equipment taking immense strain due to load shedding, maintenance has unfortunately moved down the priority list. The time is now to implement what municipalities can control - protecting and monitoring installed equipment.

Read more...

---

Programmable multicolour indicator beacons
Turck Banner Southern Africa Operator Interfaces, Switches & Relays
Pro Editor software lets users program the K100 Pro Daylight Visible and K100 Pro Indicator with a variety of alarms, colours and animations.

Read more...

---

Low-profile touchless switches
Fox Controls Rand Operator Interfaces, Switches & Relays
LED illumination and indoor/outdoor durability make these low-profile touchless switches ideal for clean and functional industrial and public applications.

Read more...

---

PID controller with multicolour LCD
Allpronix Operator Interfaces, Switches & Relays
The Novus N1050 is an advanced PID controller featuring a large, bright and easy-to-read multicolour 11-segment LCD display with clear status signalling.

Read more...

---

Switch amplifiers for multiple voltage ranges
Pepperl+Fuchs Operator Interfaces, Switches & Relays
The new KFU8-SR-Ex product family of switch amplifiers from Pepperl+Fuchs offers a solution that is both efficient and reliable.

Read more...

---

SIL 2 safety switching over fibre-optic cable
Omniflex Remote Monitoring Specialists Operator Interfaces, Switches & Relays
The FCT and FCR module pair are DIN-rail mounted, fibre-optic contact transmitters and receivers that can send a digital contact signal up to 10 km over a single optical fibre.

Read more...

---