Level Measurement & Control


BP upgrades radar level measurement

September 2012 Level Measurement & Control

BP Exploration has replaced unreliable level transmitters previously used on a floating production, storage and off-loading (FPSO) vessel with guided wave radar (GWR) transmitters from Emerson Process Management. The accurate and reliable level readings from Emerson’s Rosemount 5300 Series GWR transmitters have helped BP increase safety, reduce shutdowns and maximise production.

Operating 160 km off the west coast of Africa, the BP FPSO processes and stores oil production for export. At 310 metres in length, it has an oil storage capacity of 1,77 million barrels and can process up to 240 000 barrels per day.

A challenging application

Changing process conditions and the presence of foam and vapour, as well as dirty sticky fluids, made this a difficult application for measuring level. The original transmitters had compatibility issues with the FPSO’s Foundation Fieldbus network and limited capability detecting low dielectric hydrocarbons.

To address these issues, BP Exploration worked with Emerson to replace the units with Rosemount 5300 GWRs. With Emerson’s advanced signal-processing technology that ensures detection of low dielectric fluids, the Rosemount GWR is able to send and receive a cleaner, stronger signal. This allows the use of single-lead probes that increase tolerance to solids build-up and coating, and eliminate trips due to false readings. In addition, the fieldbus interface made installation and configuration both quick and easy.

The improved level detection enabled by the new instruments has also helped BP Exploration improve safety. The susceptibility of the existing GWRs to material build-up on the co-axial probes and their inability to distinguish the presence of a light hydrocarbon layer on top of the water meant that the level measurements were unreliable. This unreliability compromised one of the layers of protection used to ensure safe operations.

Following the installation of the Rosemount 5300 GWR transmitters, the process data has confirmed the accuracy and reliability of the instruments and their suitability for the widely varying process conditions of the FPSO.

For more information contact Mark Tapson, Emerson Process Management, +27 (0)11 451 3700, [email protected], www.emersonprocess.com



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Small, inexpensive radar level transmitters
VEGA Controls SA Level Measurement & Control
Anyone who needs to keep processes running needs level measurement technology that measures reliably. However, what is needed is not always the most ‘fully featured’ solution, but the smartest one. This is exactly what VEGAPULS radar transmitters of the BASIC series do.

Read more...
Meeting the challenges of tank obstructions interfering with radar
Level Measurement & Control
One of the most challenging applications for non-contacting radar level transmitters is measuring level in tanks with internal obstructions, such as agitators, heating coils, pipes, ladders or baffles. Rosemount non-contacting radar level transmitters from Emerson feature an advanced solution that enables accurate and reliable level measurements in tanks with obstructions.

Read more...
A fresh approach to dairy processing
VEGA Controls SA Level Measurement & Control
Ensuring the quality and safety of milk throughout the production process is of the utmost importance in the dairy industry. The VEGABAR pressure transmitters are suitable for hygienic applications. They are an asset in the dairy industry and have been used with success for measuring the milk level and the process pressure in storage tanks.

Read more...
Multiphase level measurement
Mecosa Level Measurement & Control
The measurement of more than two phases or of interfaces that are not clearly defined poses a number of challenges for measurement technology. Radiation-based measuring systems such as Berthold‘s EmulsionSENS master these problems.

Read more...
Simple and efficient level measurement in the mining, minerals and metals industries
Endress+Hauser South Africa Editor's Choice Level Measurement & Control
Measuring devices in the mining, minerals and metals industries face the challenge of varying material states and long distances in measurement height. Endress+Hauser’s answer to these challenges is the new Micropilot family.

Read more...
Level measurement of an acid dosing tank at a WWTP
Level Measurement & Control
Ferric chloride and other acids are essential chemical substances in water and wastewater treatment. To control the dosing of acid solutions, an Australian wastewater treatment plant uses a special container to store, mix and add these chemicals. The company opted in favour of KROHNE’s OPTIWAVE 1540 radar level transmitter

Read more...
Powering sub-Saharan Africa’s energy future
VEGA Controls SA Level Measurement & Control
Crude oil storage plays an important role in the energy infrastructure of sub-Saharan Africa. The management of crude oil storage in comes with numerous challenges, including safety concerns, environmental conditions and infrastructural limitations.

Read more...
A new era in radiometric level and density measurement
Mecosa Level Measurement & Control
The LoopSeries LB 430 radiometric detector from Berthold Technologies has a revolutionary power solution and sets new standards in level and density measurement.

Read more...
High-flow solenoid valve
Emerson Automation Solutions Valves, Actuators & Pump Control
Emerson has introduced the new ASCO Series 327C solenoid valve, which features a direct-acting, high-flow design that provides superior flow-to-power ratio. It permits high flows at minimum power levels, making it ideal for use in power plants, refineries, and chemical processing facilities.

Read more...
Level measurement of leachate from sewage sludge humification
KROHNE Level Measurement & Control
A municipal utility in eastern Germany operates a state-of-the-art wastewater treatment plant with sustainable sludge treatment. The ultrasonic signal was being partially deflected by the wind, leading to frequent false measurements and inefficient process workflows. The problem was solved by replaced the ultrasonic level sensor with KROHNE’s OPTIWAVE 1540 non-contact radar.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved