Data Acquisition & Telemetry


Honeywell's wireless solution at Codelco

July 2012 Data Acquisition & Telemetry

Codelco is the world’s largest copper producer, generating around 1,8 Mt or 15% of the world’s total copper output per year. The Chilean


state-owned copper mining company is headquartered in Santiago and owns the world’s largest known copper reserves and resources. The Norte division consists of three open pit mines producing approximately 896 000 tons of electro-refined and electro-wined cathodes.

The miner has a joint venture, Kairos Mining, which was created in strategic alliance with Honeywell. Through the Kairos Mining alliance, Codelco started a long-term comprehensive automation programme for its mineral concentrator plants located at Codelco Norte, Andina and El Teniente sites.

Challenge

Codelco recognised the need for further optimisation at its Norte plant, but it was unable to install wired instruments in the thickeners pool which could suddenly empty because there was no way to measure levels except manually. Codelco could not retrieve accurate or timely water levels of both the dark (untreated) and recovered (clean treated) water of the pool; if clear water levels are too low, then not enough water is recovered. In addition, the topography of the region presented many obstacles including climate and distance challenges.

“The former inability of gauging online and the high cost of maintaining the wired traditional network (frequently broken by heavy trucks and machinery) caused very low availability of measurement,” said Guillermo Cortés, concentrator automation leader, Codelco.

Solution

Codelco chose Honeywell’s OneWireless to connect new field devices at the Norte mine to the existing Honeywell TPS control system. The OneWireless network is used to connect Siemens S7 300 PLCs to the Honeywell TPS system; the PLCs are then used to manage equipment and instruments installed at each tank and pool. Since installing the OneWireless solution, the use of water is much more efficient because the level of water in the thickeners can be accurately gauged.

There are seven OneWireless multinodes covering the site, allowing operators in the control room to call information from the PLCs under the Honeywell TPS control system. This information can be fed into the Profit Controller application to optimise process control of the facility.

After the successful implementation of the network to support PLCs, Codelco decided to install Honeywell XYR 6000 high level analogue input transmitters to monitor the level of the clear and dark water using ultrasonic transmitters. The information is automatically transmitted to operators who can make sure water levels are accurate. “We can now gauge and manage the thickeners’ level and flow, the efficiency of the whole process has improved greatly,” said Cortés.

Benefits

Codelco applied the OneWireless solution to the final part of the concentration process where water is recovered for reuse in the process. The efficiency of this process has improved greatly since the implementation and many other benefits also accrued from the OneWireless implementation, including:

* Fast access to real-time data using ISA 100 standards.

* Ability to retrieve timely and accurate water levels of the thickener pools.

* Control room operators can call information remotely from PLCs.

* Information fed into Honeywell Profit Controller provides more accurate decision-making.

* Saved money by not using costly wiring.

“Honeywell’s OneWireless has given us a comprehensive solution through the ability to gauge multiple variables and transmit them in real-time with high availability. We can now gauge and manage the thickeners’ operating parameters precisely with consequent improvement in our water recovery process,” concluded Cortés.

For more information contact Boni Magudelela, Honeywell Southern Africa, +27 (0)11 695 8000, [email protected], www.honeywell.co.za





Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Programmable LED indicators
Turck Banner Southern Africa Industrial Wireless Data Acquisition & Telemetry
Turck Banner is expanding its portfolio of LED lights with the robust LED indicators of the K100 series. These units improve workflow and reduce downtime through clearly communicated status information.

Read more...
Decoding the world of direct part marks
Omron Electronics Data Acquisition & Telemetry
OMRON has unveiled its latest breakthrough, the V450-H ultra-rugged handheld scanner. Tailored specifically for industrial DPM reading, this innovative device sets new industry standards for durability and performance.

Read more...
Green manufacturing energy conservation and emission reduction
Dahua Technology South Africa Data Acquisition & Telemetry
As a world-leading video-centric AIoT solution and service provider, Dahua is committed to improve its sustainable development capabilities and to make continuous efforts in building a greener and safer digital world by developing innovative solutions that can help conserve energy and reduce carbon emission.

Read more...
Adding value in a Heartbeat
Endress+Hauser South Africa Data Acquisition & Telemetry
This Endress+Hauser technology provides enhanced measuring reliability and safety, higher efficiency in operation, productivity gains and compliance, and fewer unplanned shutdowns.

Read more...
Radio telemetry network
Omniflex Remote Monitoring Specialists Data Acquisition & Telemetry
Remote monitoring specialist Omniflex has completed a system revamp of legacy radio monitoring equipment for Lepelle Northern Water.

Read more...
Versatile problem solving for IO-Link networks
Turck Banner Southern Africa Data Acquisition & Telemetry
Turck Banner’s family of converters is the first step on the path towards full system integration. They are compact, simple add-ons that seamlessly fit into factory applications. They make it possible to take various types of signal and convert them to protocols such as IO-link, PICK-IQ, PWM/PFM and Modbus.

Read more...
Industrial signal conditioning
TANDM Technologies Data Acquisition & Telemetry
Visit Stand B516 to view the range of ClipX modules, the interference-proof signal conditioning system. The ClipX has an accuracy class of 0,01 and an integrated calibration certificate. Available for ...

Read more...
Compact data acquisition module
Data Acquisition & Telemetry
National Instruments’ CompactDAQ systems collect and deliver the data validation needed to meet test requirements at any distance and in any environment. These portable, customisable solutions are comprised ...

Read more...
KPMs rotary consistency transmitter boosts pulp mill performance
Data Acquisition & Telemetry
In today’s pulp and paper-making market place, consistency measurement is one of the most important ways to keep costs as low as possible without sacrificing quality or production throughput. KPM’s KC/5 ...

Read more...
Video AI carrier board for Jetson modules
Data Acquisition & Telemetry
The JetStream is a multi-channel video AI carrier board for Jetson modules. It provides dual HDMI and eight composite video inputs, allowing multi-channel video AI applications to be rapidly developed and deployed.

Read more...