Maintenance, Test & Measurement, Calibration

20 MNz handheld oscilloscope

March 2000 Maintenance, Test & Measurement, Calibration

The DG-Scope is a handheld oscilloscope specially designed for diagnostic troubleshooting in the field. This instrument offers a wide range of measuring options with a built-in digital storage scope, digital multimeter, frequency counter and a logic analyser all in one unit.

The instrument is a dual channel scope with a bandwidth of 20 MHz, with a large EL graphic dislay. The scope mode has cursor measurement for DV, DT and 1/DT. The meter has an auto set-up mode that will automatically set up, thus saving the operator time.

The multimeter mode displays the reading with a numerical display as well as a bar graph indication. Features include AC and DC voltage and current, resistance to 400 MW, diode test and continuity buzzer. The operator can view the relative, min/max and dBm readings simultaneously.

The logic analyser mode has eight channels and is unique as a computer or electronics technician can now afford to have the correct instrument when repairing equipment on site at a customer's premises.

The optional RS232 software operates under Windows and is useful where data or waveforms need to be captured for later analysis. The meter is supplied complete with a rubber holster, two scope probes and multimeter test leads.


(011) 822 1551


Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Remote monitoring for CP systems
August 2021, Omniflex Remote Monitoring Specialists , Maintenance, Test & Measurement, Calibration
PowerView iREF8 allows businesses to add remote monitoring to existing cathodic protection (CP) systems.

Online monitoring of haul trucks
August 2021, SKF South Africa , Maintenance, Test & Measurement, Calibration
IMx-16 Multilog online monitoring systems on two mobile mining haul trucks at a leading copper mine in Zambia predict critical component failures and allow for planned predictive maintenance procedures to be carried out.

Monitoring oil and gas pipelines
August 2021, RJ Connect , Maintenance, Test & Measurement, Calibration
Moxa’s MDS-G4020 series offers a modular platform that can be fitted with fibre interfaces to connect pipeline subsystems to a control centre over long distances.

Non-contact meter for voltage measurements
August 2021, Comtest , Maintenance, Test & Measurement, Calibration
The new Fluke 377 FC and 378 FC Non-Contact Voltage True-RMS AC/DC Clamp Meters can measure voltage and current simultaneously without touching a live wire.

Lubrication oil filtering and monitoring with Hydrasales
July 2021, Hydrasales , Maintenance, Test & Measurement, Calibration
The viscosity of oil in a lubricating system and its impact on bearings if not appropriately filtered, can adversely impact on system performance and even have catastrophic consequences.

Five considerations when creating a wastewater machine monitoring plan
July 2021, TANDM Technologies , Maintenance, Test & Measurement, Calibration
In a water scarce country like South Africa, handling wastewater correctly is not a luxury but an essential service.

Monitored cathodic systems
July 2021, Omniflex Remote Monitoring Specialists , Maintenance, Test & Measurement, Calibration
Omniflex partners with IEV to bring remotely monitored cathodic protection systems to South East Asia.

Wide range of bonding adhesives available from BI
July 2021 , Maintenance, Test & Measurement, Calibration
Bearings International carries a wide range of instant and structural bonding adhesives throughout its extensive branch network in South Africa.

Thermal camera with IR-Fusion technology
August 2021, Comtest , Maintenance, Test & Measurement, Calibration
Comtest has introduced the Fluke TiS60+ with Fluke IR-Fusion technology that allows users to see things that are invisible to the eye and reveal problems that cannot be detected with other tools.

Industry first for pump testing laboratory
June 2021, Instrotech , Maintenance, Test & Measurement, Calibration
When a local fire pump test facility needed to eliminate human error from its test procedures, it contacted Instrotech for advice.