Sensors & Transducers


Compact non-contact linear inductive sensors

December 2011 Sensors & Transducers

Turck’s Q-track family of linear position sensors has been expanded to include the newest QR14 and the Q17 models. Measuring just 14 mm and 17 mm in height, the compact, non-contact inductive sensors deliver dependable, repeatable measurements in applications with spacing limitations and harsh environments.

Operation is based on the RLC resistance inductance capacitance principle. Unlike potentiometric or magnetostrictive technologies, the sensors incorporate precisely manufactured printed emitter and receiver coil systems. The emitter coils are activated with a high frequency AC field and produce an inductive RLC circuit with the positioning element. The element is inductively coupled with the receiver coils, which are arranged so different voltages are induced in the coils, depending on the position of the actuator. The voltages serve as a measure for the sensor signal. Q-track sensors deliver maximum measuring spans, with minimal blind zone and high resistance to EMI/RFI noise interference.

“The low profile design and rugged housing make the Q-track sensors the preferred choice for versatile linear positioning applications,” said Marty Cwach, product manager, Turck. “Our ability to repackage technology into new housing designs enables us to deliver smaller sensors that suit the widest variety of application and spacing requirements.”

Superior to alternative technologies, the innovative design, linearity and repeatability of the Q-track sensors eliminate the performance failures commonly experienced with other technology options. The RLC principle of operation used in the Q-track linear position sensor is highly immune to noise interference and is inherently weld field immune. Since the position element does not contain a magnet, it can be used in metalworking applications because it will not attract ferrous debris, which would affect the operation of a magnetostrictive sensor. Additionally, the inductively coupled position element provides non-contact position feedback. This is ideal for use in applications with constant motion, such as pinch rollers, cylinder position, web tension control and pitch control.

Along with these advanced design features, the compact, durable construction increases functional flexibility. The QR14 and Q17 include both current and voltage outputs, eliminating the need for two separate sensors and offering greater convenience and cost efficiency. The fully potted and sealed IP67-rated housing protects against moisture and dust in demanding environments.

For more information contact Rodney Topham, RET Automation Controls, +27 (0)11 453 2468, [email protected], www.retautomation.com



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Powering safer mining with PDS
Sensors & Transducers
With the mining industry under increasing pressure to prioritise safety without compromising productivity, Booyco Electronics is pushing the boundaries of Proximity Detection System and Collision Avoidance System technology across both underground and surface operations.

Read more...
The car of the future listens
Sensors & Transducers
The perception of external sounds in cars has been lacking, even in automated driving. That is why Fraunhofer IDMT-HSA is researching the integration of acoustic sensor technology in its KI4BoardNet project with the Hearing Car.

Read more...
Telco Sensors for blocked or empty chute detection
Sensors & Transducers
In most industries there is a problem with photoelectric sensors as highly contaminated environments make it difficult to operate and sense reliably. Telco Sensors overcomes this through its powerful high-performance infrared sensors that ensure penetration of harsh pollution to guarantee reliable detection.

Read more...
High-performance LineScan camera
Sensors & Transducers
Lynred, a global leader in infrared imaging technologies, has launched its next-generation SWIR LineScan camera and sensor, specifically designed for the inspection of silicon wafers, solar panels and waste management.

Read more...
Online monitoring solution optimises asset performance across
SKF South Africa Sensors & Transducers
SKF’s sales, service and management teams has joined forces to deliver an advanced, integrated online monitoring solution for a key customer in Tunisia, operating nine mines, five plants and eleven production lines.

Read more...
OMRON launches new non-contact
Sensors & Transducers
OMRON has unveiled its latest innovation in non-contact safety door switches, the D40A-2, which is designed to enhance workplace safety and streamline machinery operations.

Read more...
Vibration monitoring in three axes
ifm - South Africa Sensors & Transducers
Machine vibrations are important indicators when it comes to assessing the current condition of a machine. ifm’s new and smart IO-Link vibration sensor helps to implement a simple and scalable condition monitoring approach using but a single device.

Read more...
Smart solutions for weighing in hazardous milling zones
Sensors & Transducers
Minebea Intec supplies highly accurate weighing and inspection solutions that enable milling companies to organise their processes safely, efficiently and compliantly - even in hazardous areas.

Read more...
Optimise sludge treatment and reduce operational costs
Sensors & Transducers
The Endress+Hauser inline measuring devices, the Proline Teqwave MW 300 and the Proline Teqwave MW 500, determine the total solids content of wastewater directly through microwave transmission. This is considerably less time consuming than the process of determining total solids content in a laboratory.

Read more...
Family of analysers for smart and efficient chlorine measurement
ABB South Africa Sensors & Transducers
ABB has launched ChloroStar, a family of sensors, transmitters and accessories for accurate and reliable chlorine measurement and analysis that enable users in the water, wastewater and other industries to control chlorine more efficiently, enhancing treatment and increasing process uptime.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved