Sensors & Transducers


General purpose sensors for vibration analysis

July 2011 Sensors & Transducers

Monitran has launched six new ranges of general purpose vibration sensors that feature high accuracy, quick recovery from shock loading and high immunity from electrical noise, making them suitable for a variety of applications in several industrial sectors.

All the new Monitran sensors are supplied as top or side entry with integral cables and connectors. Submersible and intrinsically safe versions are also available.

Devices in a new 2200 range are ideal for vibration analysis. As standard, they operate between ±80 g, have a rapid response to shock loading and can withstand forces in excess of 10 000 g. The sensors have isolated AC outputs with sensitivities of 100 V/g, with alternate sensitivities available on request. In addition, the devices offer good bias voltage stability with typical drift no more than 3 mV/° with a bias voltage of 11,6 V.

A second new range, the 2300 series, comprises dual output devices. Here, sensors replicate AC output for vibration analysis (per the 2200 range), but also have an output proportional to temperature (at 10 mV/°C, a de facto sensitivity for many data loggers).

For monitoring velocity, Monitran’s third new range, the 2285 series, features devices with DC outputs (4–20 mA) proportional to RMS velocity (outputs proportional to peak velocity are available on request). These are ideal for providing machine/plant protection by allowing monitored velocity (ie speed of vibration) levels to be included within a condition-based predictive maintenance strategy. The maximum sensitivity is typically 0 to 100 mm/s. By incorporating full internal screening within the 2285 range, potential earth loop problems are eliminated and installation is simplified.

The fourth range of sensors is the Monitran 2287 series offering the same features as the 2285 series but with the DC output proportional to acceleration as opposed to velocity. RMS is standard but with peak as an option.

The fifth and sixth ranges, series 2385 and 2387, add secondary outputs for temperature (again output is at 10 mV°C) to the 2285 and 2287 ranges.

For more information contact Pieter Deysel, Instrotech, +27 (0)11 462 1920, [email protected], www.instrotech.co.za



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Rotary atomisers for efficient paint spraying
Instrotech Sensors & Transducers
Painting the bodywork is an integral component of vehicle manufacturing. Keller supplied intrinsically safe pressure transmitters and intrinsically safe temperature sensors to a client producing paint robots for the car industry.

Read more...
The smallest most powerful infrared sensor in the world
Sensors & Transducers
The superior performance and robustness of Telco’s infrared sensors ensures that there are no limits to any mining and industrial applications.

Read more...
Easy parameter setting of vision sensors
ifm - South Africa Sensors & Transducers
Contour verification and object inspection are two of the most important functionalities in industrial imaging. With the new O2D5xx series, ifm now offers a solution that perfectly masters both functionalities

Read more...
New range of vision units
Beckhoff Automation Sensors & Transducers
Beckhoff has added four new vision units to its VUI2000 series. They integrate a camera, illumination and liquid lens technology for simplified installation.

Read more...
Condition monitoring sensor
Sensors & Transducers
The Balluff BCM Gen2 Condition Monitoring Sensor is an advanced IIoT-ready device designed for real-time machine health monitoring.

Read more...
Inductive IO-Link sensors
Turck Banner Southern Africa Sensors & Transducers
Turck Banner is expanding its sensor range, with inductive measuring sensors with IO-Link and an analogue output for flush and non-flush mounting.

Read more...
Value of PDS grows with data and sensing technology
Sensors & Transducers
Rapidly developing technology is constantly being harnessed by proximity detection systems (PDS) to deliver steadily improved functionality to customers. Booyco Electronics sees improved PDS solutions being developed, such as the combination of multiple different sensing technologies into a single fully integrated solution.

Read more...
Pulp fiction or pulp precision?
VEGA Controls SA Sensors & Transducers
The density of fruit concentrate has a direct impact on the flavour, texture and overall quality of the final product. The VEGA Minitrac 31, VEGASOURCE 31, and the KV 31 mounting bracket present a failproof solution that effectively addresses the technical complexities associated with high temperature, viscosity and fouling.

Read more...
Telco sensors in the pulp and paper industry
Gail Norton Instrumentation Sensors & Transducers
The pulp and paper industry poses a major problem for most photoelectric sensors. The high level of contamination in these dusty, dirty and grimy environments makes it impossible for most competing sensors to operate and sense reliably and efficiently.

Read more...
Vibration monitoring with IO-Link
ifm - South Africa Sensors & Transducers
Machine vibrations are important indicators when it comes to assessing the current condition of a machine. fm’s new and smart IO-Link vibration sensor helps to implement a simple and scalable condition monitoring approach using only a single device.

Read more...