Consider M-System as an alternative for I/O requirements.
M-System offers more than 3000 signal conditioners and remote I/O modules as a standard, with more than 75 000 I/O, power and mounting configuration combinations. Special input and output types are also available, with more than 20 000 having been requested and offered to M-System customers worldwide. If one signal conditioner is not enough, M-system can offer a combined solution to do the task.
The products offered by M-System include signal conditioners, distributed network I/O, paperless recorders, panel meters, surge suppressors and valve actuators. Also, M-System is continuously working on meeting modern industrial trends for open network I/O devices including Modbus, Ethernet, Devicenet, Profibus, CC-Link, Mechatrolink and Lonworks. Working with open architecture M-System product can communicate easily with popular HMI software packages and PLC/DCSs. Another important aspect is that M-System’s major offerings are certified against industry standards such as CE (EMC, LVD), UL & C-UL, ATEX and FM.
M-System products include:
* 53U multipower monitor with RS485 Modbus interface.
* Universal field programmable signal conditioner for mV, V, mA, T/C. RTD, potentiometer and resistance inputs.
* PC recorders for various I/O signals with RS232 and RS485 Modbus interfaces.
* Ultra-slim high density signal conditioners.
* Power transducers.
* Dual and quad limit alarms with various input configurations.
* Full range of surge protection for sensors, signals, networks and power lines.
M-System together with Gauteng-based supplier, Tecmo Automation, provide client-specific design advice and product specifications. On-site process analyses can be conducted and results can be used in order to supply a customised and optimised solution. Various distributors are present throughout South Africa to assist with application and on-site assessment. Product catalogues are available upon customer request and product specific demonstration can be arranged if required.
Valmet’s automation powers world’s largest air-to-water heat pump Valmet South Africa
PLCs, DCSs & Controllers
Valmet will supply an automation system for Helen’s Patola air-to-water heat pump plant and two electric boilers currently being built in Helsinki, Finland. When completed, the air-to-water heat pump plant will be the largest in the world with a full heating production capacity around 30 MW.
Read more...All eyes on the modern DCS platform Schneider Electric South Africa
PLCs, DCSs & Controllers
Modernised DCS platforms are no longer confined to hardware-dependent architectures. These systems have evolved to combine the strengths of both PLCs and DCS while adding capabilities that make them more open, resilient and collaborative.
Read more...Automation solution for waste management at incineration facility
PLCs, DCSs & Controllers
Valmet is to deliver an automation system to Seongnam City’s incineration facility currently under construction in South Korea. By leveraging intelligent automation, the plant will optimise energy production, minimise emissions and deliver efficient, consistent performance throughout its entire lifecycle.
Read more...Valmet’s supplies DCS to Europe’s largest electric boiler plant Valmet South Africa
PLCs, DCSs & Controllers
Valmet will supply an automation system to Helen’s Hanasaari electric boiler plant and a thermal accumulator being built in Helsinki, Finland. Once completed, it will be Europe’s largest electric boiler plant.
Read more...Technology blueprint paves way for e-methanol fuel expansion Schneider Electric South Africa
PLCs, DCSs & Controllers
Schneider Electric has delivered the technology stack behind European Energy’s Kassø Power-to-Xfacility, the world’s first commercially viable e-methanol plant.
Read more...New energy-efficient evaporation line for dissolving pulp production Valmet South Africa
PLCs, DCSs & Controllers
Valmet will deliver a new evaporation line to Altri Biotek mill in Portugal. This delivery is part of Altri’s €75 million project to convert the Biotek mill to produce dissolving pulp for the textile industry.
Read more...Valmet modernises turbine automation Valmet South Africa
PLCs, DCSs & Controllers
Valmet has received an order to deliver a comprehensive replacement of plant DCS and turbine control systems at Ennatuurlijk’s combined cycle power plant in the Netherlands.
Read more...Hybrid DCS for an evolving industrial landscape Schneider Electric South Africa
PLCs, DCSs & Controllers
Today’s industrial automation continues to evolve at a blistering speed, which means traditional DCSs have to keep up to ensure continuous integration into modern, digital infrastructure.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version