Pressure Measurement & Control


Submerged pressure transmitters

March 2010 Pressure Measurement & Control

Turck has introduced a new submersible pressure transmitter to meet the increasingly difficult level detection challenges presented in industrial environments, like tanks containing liquids such as gas and diesel, or wastewater and irrigation systems. The PT4510 submersible pressure transmitter was designed for low level applications of up to 1 m, while the PT4500 is available in ranges up to 6 bars.

The PT4500 and PT4510 submersible pressure transmitters are used to detect the level of water or other media with similar density by placing the transmitter at the bottom of the tank holding the liquid. These transmitters convert the pressure reading to an analogue 4-20 mA output signal. The electrical connection to the transmitter is routed through the top of the tank and contains power and signal wires, as well as a breathing tube used as a reference port to determine the atmospheric pressure outside of the tank. These IP68 rated stainless steel pressure transmitters may be used in industrial applications, as well as hazardous classified areas.

For more information contact Rodney Topham, RET Automation, +27 (0)11 453 2468, [email protected], www.retautomation.com



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Condition monitoring to go
Turck Banner Southern Africa Fieldbus & Industrial Networking
Anyone who wants to efficiently monitor the climate in control cabinets will find a comprehensive range of control cabinet monitors for the DIN rail in Turck Banner’s cabinet condition monitoring family.

Read more...
VEGA handles the pressures of water treatment systems
VEGA Controls SA Pressure Measurement & Control
A water treatment system for a major metropolitan area in the Midwestern United States demands careful monitoring and management of processes across its sprawling network. Choosing VEGA for its process automation needs meant more than just obtaining precise and reliable pressure sensors.

Read more...
Monitoring the voltage drop in cables
Turck Banner Southern Africa Electrical Power & Protection
With its new M12Plus connectors, Turck Banner is directly shifting the condition monitoring of cables subject to severe stress to the connection technology. The connectors, which come with voltage and current monitoring and a Bluetooth chip, enable measured voltage and current values to be sent wirelessly to a controller.

Read more...
Improved inductive coupler sets
Turck Banner Southern Africa Electrical Power & Protection
Online teaser: Turck Banner has updated its inductive coupler sets and now also offers additional functions such as selective pairing in addition to improved performance.

Read more...
Advantages of wireless storage tank and container tank level monitoring
Turck Banner Southern Africa Editor's Choice
Implementing a tank monitoring system that utilises ultrasonic or radar sensors in a wireless network has many advantages.

Read more...
Robust Ethernet cordset series of cables
Turck Banner Southern Africa Enclosures, Cabling & Connectors
Turck Banner offers a product range comprising a wealth of different connectors and cables, including over 115 000 connection technology solutions with differing degrees of complexity.

Read more...
Multicolour strip lights with superior environmental resistance
Turck Banner Southern Africa Electrical Power & Protection
Turck Banner’s industrial LED lighting products are high-quality and energy-efficient lights that provide years of maintenance-free operation, with no bulb or ballast changes required throughout the lifespan of the device.

Read more...
Pressure sensors for hydrogen applications
Instrotech Pressure Measurement & Control
Keller manufactures isolated piezoresistive pressure sensors. The great advantage of the piezoresistive measuring principle is its high stability.

Read more...
Machine safety, diagnostics and data security
Turck Banner Southern Africa IT in Manufacturing
Personnel safety systems on machines are often seen as a necessary evil. To function correctly, a safety device is required to be self-checking, which adds more complexity and costs compared to a non-safety device.

Read more...
Sensor technology for cartonboard machine for paper and packaging
VEGA Controls SA Pressure Measurement & Control
Paper and packaging specialist, LEIPA undertook a comprehensive modernisation project, combining three stock preparation lines into one, and making investments in new plant components and extensive automation technology. Because of the good experiences the company had already had with VEGA sensors, those responsible for planning and maintenance decided in favour of the VEGABAR 82 pressure transmitter as the standard instrument for level and pressure measurement in the new stock preparation system.

Read more...