PLC suitable for uptime critical applications
April 2001
PLCs, DCSs & Controllers
The CVM1 is now available in a duplex system configuration, providing additional operating reliability for use in critical control system applications.
* Redundant CPUs.
* Redundant power supplies.
* Hot standby simultaneous processing function.
* On-line CPU, power supply and I/O module replacement
* Synchronised program execution and switching functions.
* Meets UL/CSA/CE standards.
CVM1D is particularly suitable for applications where uptime is critical, providing an additional level of reliability and system performance beyond simplex control systems. Some of the key features of the CVM1D system:
* It has the same processing power and capability of the proven CVM1 series controllers. Specific differences are indicated in the installation and operation manuals.
* The CVM1D is a single rack system, using a duplex switcher to monitor the status of the primary and secondary CPUs. Both CPUs execute programs and scans and events are synchronised at several points during the process.
* In the event of an error or failure detection, the duplex switcher takes the primary CPU off-line and switches the secondary CPU over to primary status.
* Extensive status registers and LEDs indicate the specific error conditions that have occurred.
* CPUs, power supplies and discrete I/O modules can be removed and replaced while the system is in operation and powered.
* Standard CVM1 expansion capabilities are possible with the CVM1D, with redundant power supplies and I/O removal capability.
Yelland Control
(011) 874 7770
[email protected]
Further reading:
Network-capable remote relay system with flexible channel assignment
Phoenix Contact
PLCs, DCSs & Controllers
Phoenix Contact has launched a modular PLC-Interface Ethernet Gateway remote relay system with up to 56 configurable I/O channels, multi-protocol support including Profinet Class C and S2 redundancy, and compatibility with established controller software for straightforward network integration.
Read more...
Seven checks before replacing an obsolete industrial control component
PLCs, DCSs & Controllers
An obsolete control component rarely fails in isolation. Before ordering an exact spare, manufacturer successor or engineered alternative, maintenance and procurement teams should work through seven checks to define the problem properly and avoid a costly mismatch.
Read more...
Loop signature Part 2-6
PLCs, DCSs & Controllers
This instalment of the Loop Signature series introduces frequency plot theory as a foundation for understanding process dynamics, explaining Bode plots, dynamic gain, phase lag and their relationship to control loop tuning.
Read more...
The rise of software-defined brownfield automation
Schneider Electric South Africa
PLCs, DCSs & Controllers
Schneider Electric’s EcoStruxure Automation Expert is enabling brownfield operators to modernise incrementally, decoupling control logic from hardware to bridge legacy equipment and future-ready operations without disrupting production.
Read more...
Upgrading alarm systems for critical industries
Omniflex Remote Monitoring Specialists
PLCs, DCSs & Controllers
Omniflex’s OMNI16R alarm annunciator platform provides a direct replacement for legacy CSA systems such as MPAS 90 and SA9100, enabling operators in oil and gas, nuclear and power generation to modernise alarm infrastructure without sacrificing the clarity required for safe operations.
Read more...
How DCS can step off the hardware obsolescence treadmill
Schneider Electric South Africa
PLCs, DCSs & Controllers
Schneider Electric argues that virtualising DCS environments breaks the cycle of hardware obsolescence, giving plant operators a smarter path to lifecycle modernisation without production disruption.
Read more...
Loop signature Part 2-6
PLCs, DCSs & Controllers
The Loop Signature series turns to frequency plot theory, explaining Bode open-loop plots and how dynamic gain, phase lag and crossover frequency can be extracted from test data to inform more accurate control loop tuning.
Read more...
PC-based control in surgery
Beckhoff Automation
Editor's Choice PLCs, DCSs & Controllers
Researchers at the University of Basel are using Beckhoff PC-based control technology to develop a miniature laser robot for minimally invasive bone surgery.
Read more...
IIoT controller for the field and control cabinet
ifm - South Africa
PLCs, DCSs & Controllers
The IIoT controller from ifm is a powerful, communicative and flexible PLC solution in machine and plant digitalisation.
Read more...
How the DCS can step off the hardware obsolescence treadmill
Schneider Electric South Africa
PLCs, DCSs & Controllers
Ageing servers and unsupported operating systems are quietly eroding the stability of process plants that rely on distributed control systems. Kobus Vermeulen of Schneider Electric explains how virtualising the DCS environment can break the hardware obsolescence cycle without disrupting operations.
Read more...
printer friendly version