Caesars Gauteng impressed with test equipment

March 2001 Maintenance, Test & Measurement, Calibration

The Slots Department of Caesars Gauteng has been using Fluke instruments for only three months and remarkable results are already evident. The seven units, supplied by Spescom MeasureGraph, are used in Slots Technical, a sub-department responsible for the repair and maintenance of the gaming machines, as well as projects, installations and all other requirements of the department as a whole.

Coordinator Paul Scott says the instruments have improved the diagnostic capabilities and as a result the productivity of Slots Technical. He explains which products were bought and what they are used for. "The Fluke 65 infrared thermometer is used to check temperatures in high heat areas such as the interiors of our video poker machines. This has been identified as a major cause of monitor failure so it is critical to identify excessive heat problems timeously.

"We chose the Fluke 123 Scopemeter for its portability. It is used for fault diagnostics in situ on the gaming floor. The Fluke VR101S voltage event recorder monitors fluctuations in our 220 V supply. Most of the equipment on our gaming floor is supply-sensitive, and although all machines have overvoltage protection built in, sizable fluctuations do affect their operation. The 77III multimeter fulfils a general multimeter role in our day to day maintenance and repairs."

These are not the first Fluke instruments that Scott bought. "I prefer Fluke products as they are the most reliable and rugged on the market. I used Fluke instruments for 14 years in the mining industry as well as in 'soft' applications such as the casino environment, and can safely say they are the best value for money available."

Scott says the Slots Department have used a variety of products since the opening of Caesars Gauteng in December 1998 but has only started using the Fluke 65, the Fluke 123 scopemeter and the Fluke VR101S recently. "These instruments have improved our diagnostic capabilities dramatically and as a result our productivity as well. At present we are not using all the features of the units, which leads me to believe that we can see further improvements in their role in our work." Scott ends with a compliment for Spescom MeasureGraph: "The company is professional, efficient and reliable, and the after sales service is very good."

Spescom MeasureGraph, a subsidiary of JSE-listed Spescom Limited and a leading supplier of test and measurement equipment, is the sole local distributor of Fluke products.

Spescom MeasureGraph

(011) 266 1572

[email protected]

www.spescom.com

Further reading:

Infrared thermometers for electrical, industrial and HVAC applications
Comtest Maintenance, Test & Measurement, Calibration
: Comtest, distributor of Fluke test and measurement equipment, explains how handheld infrared thermometers are transforming maintenance in electrical, industrial and HVAC environments, with three measurement strategies and a wide range of practical applications.

Read more...

---

Reverse-engineering legacy industrial gearbox parts
Maintenance, Test & Measurement, Calibration
WEG Africa’s turbine workshop uses 3D scanning technology to reverse-engineer components for legacy gearboxes, turbines and compressors, enabling equipment to run for decades after OEM support and spare parts have dried up.

Read more...

---

Unlocking ICCP remote monitoring
Omniflex Remote Monitoring Specialists Maintenance, Test & Measurement, Calibration
Cathodic protection keeps buried and submerged pipelines safe from corrosion, but verifying it traditionally means costly, hazardous manual site visits. Omniflex explains how a retrofit module brings remote monitoring to ageing transformer rectifiers without replacing functional infrastructure.

Read more...

---

Microdieseling – the explosions you never hear
Maintenance, Test & Measurement, Calibration
Microdieseling is a pressure-induced thermal degradation mechanism in which entrained air bubbles are compressed so rapidly that the surrounding oil ignites, producing soot, varnish and sludge. WearCheck explains how it happens, why the damage varies, and how oil analysis detects it.

Read more...

---

Electrostatic spark discharge – when static strikes back
Wearcheck Maintenance, Test & Measurement, Calibration
WearCheck technical manager, Steven Lumley explains how static electricity accumulates in modern low-conductivity lubricants, why compact system designs and fine filtration make ESD more likely, and how to recognise the degradation it leaves behind.

Read more...

---

High-speed cameras for crash testing
Horne Technologies Maintenance, Test & Measurement, Calibration
Vision Research has expanded its Phantom C-series with two cameras optimised for crash and safety testing, offering 4 and 8 megapixel sensors rated to 170G, up to 1180 frames per second, and Phantom Academy application training planned for South Africa next year.

Read more...

---

SKF extends remanufacturing expertise to bearing clearance modification
SKF South Africa Maintenance, Test & Measurement, Calibration
Using its clearance modification expertise, SKF helped a mining equipment OEM salvage spherical roller bearing inventory that would otherwise have been scrapped, confirming a new capability within its remanufacturing services and avoiding redundant procurement.

Read more...

---

When maintenance-system compliance starts replacing plant reliability
Wearcheck Maintenance, Test & Measurement, Calibration
WearCheck ARC division manager, Annemie Willer argues that the greatest threat to effective maintenance is no longer a lack of technology, but the gradual replacement of technical judgement by CMMS compliance, leaving no one owning the machine.

Read more...

---

Automatic lubrication systems drive mobile mine machine reliability and uptime
SKF South Africa Maintenance, Test & Measurement, Calibration
SKF’s Lincoln P203 progressive lubrication systems are improving reliability and uptime on mobile machines at a Zambian gold mine, with installation of 45 units completing by October 2026.

Read more...

---

Nitration: the acid you didn’t see coming
Wearcheck Maintenance, Test & Measurement, Calibration
Nitration is as destructive as oxidation in many engines but far less understood. WearCheck technical manager, Steven Lumley explains how nitrogen oxide gases degrade lubricants, why the process is difficult to detect, and what oil analysis can reveal before damage occurs.

Read more...

---