Rexroth improves programming flexibility
May 2008
PLCs, DCSs & Controllers
Bosch Rexroth has expanded its line of IndraLogic PLCs and PACs with the new IndraControl L10 PLC featuring scalable hardware, pre-developed machine functions, re-usable code and unified programming software to reduce engineering time for machine builders who work with complex machines.
The fast PLC helps machine builders reduce engineering time
Ideal for general automation, printing, converting, packaging, machine tool and other industries, the OPC-compliant IndraControl L10 also features a full megabyte of program storage space along with an Ethernet port for remote access or scada functionality at one of the lowest prices in the market. The sizeable memory allows machine builders to run larger and more complex programs or different applications without the need for multiple PLCs.
To save valuable engineering time, the IndraControl L10 comes with dozens of PLCopen machine functions that are pre-programmed according to IEC61131-3 standards. Rexroth also offers scalable hardware allowing machine builders to re-use their programs on more powerful Rexroth PLCs without requiring different configurations or multiple versions. All Rexroth PLCs, including the IndraControl L10 can also be programmed with the same Rexroth IndraWorks unified software program, alleviating the need for a separate program for each PLC model across the family.
To save memory space and help improve scan time, Rexroth’s PLC incorporates re-usable code, a feature normally found on larger PLCs. As a result, the IndraControl L10 has a scan rate which is approximately 20 times faster than comparable PLCs currently on the market.
In addition to reducing engineering time and improving processing speed, the unit features expandability of up to 256 I/O, allowing OEMs to run complex machines without having to stack up more PLCs.
For more information contact Emil Berning, Tectra Automation, +27 (0)11 971 9400, [email protected], www.tectra.co.za
Further reading:
Network-capable remote relay system with flexible channel assignment
Phoenix Contact
PLCs, DCSs & Controllers
Phoenix Contact has launched a modular PLC-Interface Ethernet Gateway remote relay system with up to 56 configurable I/O channels, multi-protocol support including Profinet Class C and S2 redundancy, and compatibility with established controller software for straightforward network integration.
Read more...
Seven checks before replacing an obsolete industrial control component
PLCs, DCSs & Controllers
An obsolete control component rarely fails in isolation. Before ordering an exact spare, manufacturer successor or engineered alternative, maintenance and procurement teams should work through seven checks to define the problem properly and avoid a costly mismatch.
Read more...
Loop signature Part 2-6
PLCs, DCSs & Controllers
This instalment of the Loop Signature series introduces frequency plot theory as a foundation for understanding process dynamics, explaining Bode plots, dynamic gain, phase lag and their relationship to control loop tuning.
Read more...
The rise of software-defined brownfield automation
Schneider Electric South Africa
PLCs, DCSs & Controllers
Schneider Electric’s EcoStruxure Automation Expert is enabling brownfield operators to modernise incrementally, decoupling control logic from hardware to bridge legacy equipment and future-ready operations without disrupting production.
Read more...
Upgrading alarm systems for critical industries
Omniflex Remote Monitoring Specialists
PLCs, DCSs & Controllers
Omniflex’s OMNI16R alarm annunciator platform provides a direct replacement for legacy CSA systems such as MPAS 90 and SA9100, enabling operators in oil and gas, nuclear and power generation to modernise alarm infrastructure without sacrificing the clarity required for safe operations.
Read more...
How DCS can step off the hardware obsolescence treadmill
Schneider Electric South Africa
PLCs, DCSs & Controllers
Schneider Electric argues that virtualising DCS environments breaks the cycle of hardware obsolescence, giving plant operators a smarter path to lifecycle modernisation without production disruption.
Read more...
Loop signature Part 2-6
PLCs, DCSs & Controllers
The Loop Signature series turns to frequency plot theory, explaining Bode open-loop plots and how dynamic gain, phase lag and crossover frequency can be extracted from test data to inform more accurate control loop tuning.
Read more...
PC-based control in surgery
Beckhoff Automation
Editor's Choice PLCs, DCSs & Controllers
Researchers at the University of Basel are using Beckhoff PC-based control technology to develop a miniature laser robot for minimally invasive bone surgery.
Read more...
IIoT controller for the field and control cabinet
ifm - South Africa
PLCs, DCSs & Controllers
The IIoT controller from ifm is a powerful, communicative and flexible PLC solution in machine and plant digitalisation.
Read more...
How the DCS can step off the hardware obsolescence treadmill
Schneider Electric South Africa
PLCs, DCSs & Controllers
Ageing servers and unsupported operating systems are quietly eroding the stability of process plants that rely on distributed control systems. Kobus Vermeulen of Schneider Electric explains how virtualising the DCS environment can break the hardware obsolescence cycle without disrupting operations.
Read more...
printer friendly version