With the CX9000 and CX9010 Embedded PCs Beckhoff presents a further extension of the CX Embedded controller family. The CX90xx devices offer a compact, high performance and cost effective PLC and motion control system for DIN rail installation.
The device features a modular mechanical design, in its basic configuration the unit measures 58 x 100 x 91 mm. The CX9000/CX9010 controllers are available in two versions: with K-bus for direct connection of bus terminals and as an E-bus version for direct connection of EtherCAT terminals. TwinCAT is used to program the CX9000/CX9010 for automation applications. The device itself contains the run-time environment for PLC and motion control.
In the basic configuration, two RJ45 sockets connected to an integrated switch are available as interfaces. This simplifies wiring of several CX9000/CX9010 in a line topology since no separate switch hardware is required. The two externally accessible Ethernet ports are independent of the EtherCAT interface, which is served by a second MAC (media access controller) provided by the CPU.
Further interfaces may be added as required: a screen display can be realised using a CX90x0-N0x0 device and touch functionality can be connected via USB. As further options, two RS232 modules or two RS422/RS485 modules can be configured. All serial interfaces are optically isolated. Mass storage in the form of a Compact Flash card offers physical storage capacity in the range of several gigabytes.
All eyes on the modern DCS platform Schneider Electric South Africa
PLCs, DCSs & Controllers
Modernised DCS platforms are no longer confined to hardware-dependent architectures. These systems have evolved to combine the strengths of both PLCs and DCS while adding capabilities that make them more open, resilient and collaborative.
Read more...Automation solution for waste management at incineration facility
PLCs, DCSs & Controllers
Valmet is to deliver an automation system to Seongnam City’s incineration facility currently under construction in South Korea. By leveraging intelligent automation, the plant will optimise energy production, minimise emissions and deliver efficient, consistent performance throughout its entire lifecycle.
Read more...Valmet’s supplies DCS to Europe’s largest electric boiler plant Valmet South Africa
PLCs, DCSs & Controllers
Valmet will supply an automation system to Helen’s Hanasaari electric boiler plant and a thermal accumulator being built in Helsinki, Finland. Once completed, it will be Europe’s largest electric boiler plant.
Read more...Technology blueprint paves way for e-methanol fuel expansion Schneider Electric South Africa
PLCs, DCSs & Controllers
Schneider Electric has delivered the technology stack behind European Energy’s Kassø Power-to-Xfacility, the world’s first commercially viable e-methanol plant.
Read more...PC-based control in the plastics industry Beckhoff Automation
Fieldbus & Industrial Networking
Nissei Plastic, an injection moulding machine manufacturer based in Japan is implementing a worldwide tend towards open automation systems from experienced specialists using PC and EtherCAT-based control technology from Beckhoff.
Read more...PC-based control for flat wire motors for electric vehicles Beckhoff Automation
Editor's Choice Motion Control & Drives
Special machine manufacturer, ruhlamat Huarui Automation Technologies has unveiled the second generation of its mass production line for flexible stators with bar winding (pins). This enables an extremely short production cycle and line changeover times, supported by PC- and EtherCAT-based control technology from Beckhoff.
Read more...PC-based control optimises robotic parts handling on plastics machinery Beckhoff Automation
Editor's Choice Fieldbus & Industrial Networking
NEO is a cartesian robot developed by INAUTOM Robótica in Portugal for parts removal on plastics machinery. Its aim is to increase system productivity. NAUTOM Robótica has entered into a strategic partnership with Bresimar Automação to increase the working speed of the cartesian robots using advanced control and motion solutions from Beckhoff. The result is a comprehensive, future-proof automation solution for its entire family of cartesian robots.
Read more...PC-based control for flat wire motors for electric vehicles Beckhoff Automation
Fieldbus & Industrial Networking
Special machine manufacturer, ruhlamat Huarui Automation Technologies unveiled the second generation of its mass production line for flexible stators with bar winding. This enables extremely short production cycle and line changeover times, supported by PC- and EtherCAT-based control technology from Beckhoff.
Read more...New energy-efficient evaporation line for dissolving pulp production Valmet South Africa
PLCs, DCSs & Controllers
Valmet will deliver a new evaporation line to Altri Biotek mill in Portugal. This delivery is part of Altri’s €75 million project to convert the Biotek mill to produce dissolving pulp for the textile industry.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version