Modern conveyor systems provide the ability to move hot and unstable product from one area to another. The introduction of belting with extended temperature capabilities has increased the need to monitor the temperature of hot materials under conveyance. Belt damage is one matter, the impact of the hot substance at delivery must also be considered.
Contact probes such as thermocouples are not suited to this type of application due to drag and static generation. The thermal time constants associated with contact devices are also problematic. Slow response times allow large volumes of dangerous product to flow past the detector before an alarm can be generated.
A possible solution is the use of non-contact infrared thermometers. New innovations have reduced cost, increased reliability and resulted in sensors that offer greater accuracy.
The advantages of non-contact temperature measurement are:
* Fast response to temperature change.
* Hot-spot detection in moving product.
* Non-contact with corrosive substances.
* Measurement range from -50 and 3000°C.
The Raytek TXS smart sensor is designed for use with open conveyors
An innovation in infrared technology is the Raytek TXS sensor. The device can be adjusted remotely using the HART protocol without process interruption. The system is widely used on coal and coke conveyors with an air purge collar for optical cleansing.
Miniature inductive sensors ifm - South Africa
Sensors & Transducers
The inductive IY/IZ type sensors from ifm are used in various industrial areas where space is limited.
Read more...PDS implementation on mines
Sensors & Transducers
Level 9 vehicle intervention for collision avoidance has been mandatory on South African mines since 2022, yet the effective roll-out of proximity detection systems remains slower than expected. This is not due to the technical limitations of integration but to operational readiness on site.
Read more...Monitoring analogue process values ifm - South Africa
Sensors & Transducers
Everywhere in industry, electronic sensors are used to detect process values such as temperature, pressure or flow. Process value monitoring often takes place directly in the sensor.
Read more...Protecting buildings’ embodied carbon with retrofitted systems Schneider Electric South Africa
Sensors & Transducers
The World Economic Forum has said that around 80% of the buildings in existence will still be around in 2050; it is therefore essential that in order to combat climate change we retrofit them for energy efficiency.
Read more...Listening for damage to wind turbines
Sensors & Transducers
The Fraunhofer Institute for Integrated Circuits, working in concert with the Fraunhofer Institute for Wind Energy Systems, has developed a solution that can be used to identify cracks and breakage inside wind turbine blades remotely at an early stage.
Read more...Enhancing gold leaching efficiency Endress+Hauser South Africa
Sensors & Transducers
Endress+Hauser offers a range of advanced technologies designed to enhance the stability and accuracy of pH and dissolved oxygen measurements on gold processing plants.
Read more...Powering safer mining with PDS
Sensors & Transducers
With the mining industry under increasing pressure to prioritise safety without compromising productivity, Booyco Electronics is pushing the boundaries of Proximity Detection System and Collision Avoidance System technology across both underground and surface operations.
Read more...The car of the future listens
Sensors & Transducers
The perception of external sounds in cars has been lacking, even in automated driving. That is why Fraunhofer IDMT-HSA is researching the integration of acoustic sensor technology in its KI4BoardNet project with the Hearing Car.
Read more...Telco Sensors for blocked or empty chute detection
Sensors & Transducers
In most industries there is a problem with photoelectric sensors as highly contaminated environments make it difficult to operate and sense reliably. Telco Sensors overcomes this through its powerful high-performance infrared sensors that ensure penetration of harsh pollution to guarantee reliable detection.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version