Sensors & Transducers


High-performance optical sensors

September 2006 Sensors & Transducers

Telco Sensors continues to develop sensors that exceed their stated parameters - users of Telco systems know that the manufacturer's margins are up to 20% more in practice. This means not having to run 'close to the edge'. In the unlikely event of a failure, Spacemaster 6000 issues a warning by changing the status of the output signal.

The new 6000 series features:

* High immunity to environments - up to 50 000 Lux at an angle of 20°, also able to withstand dust, dirt, vibration, shock and water, without affecting functionality.

* Short detection time.

* Quick control/test input facility - the ability to run a control/test sequence during operation by use of the third wire.

* Equal Ton/Toff time of 5 ms on 6 m range - this, combined with the programming of the PLC means it can separate non-acceptable from acceptable objects, detecting with a frequency of 200 Hz (200 decisions per second).

* Protected against failure - Spacemaster 6000 exceeds the CE industrial approvals, giving full protection against power failures, wrong connections and overload.

* Extra long lifetime - both transmitter and receiver consume very little energy with only a minimal thermal rise.

* Receivers initially supplied in four different output versions.

For more information contact Telco-Gail Norton, +27 (0) 31 701 4861, telco.sa@hit.co.za





Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Market opportunity for sensors in humanoid robots
Sensors & Transducers
A new IDTechEx report forecasts the market for sensors in humanoid robots will exceed $6,59 billion by 2037, driven by perception sensors, force/torque sensors, encoders and inertial measurement units across a growing range of commercial robot platforms.

Read more...
The wireless route to safer, more efficient mining operations
Emerson Automation Solutions Editor's Choice Sensors & Transducers
Modern wireless level measurement technologies are helping mining operations improve process control, increase safety and reduce installation costs. Emerson’s Rosemount 3408 wireless non-contacting radar level transmitter uses 80 GHz frequency-modulated continuous wave radar with HART communication to reach remote assets where cabling is impractical.

Read more...
Telco sensors for harsh environments
Sensors & Transducers
Telco sensors are designed to operate where moisture, particulate contamination and surface fouling would disable conventional sensors, with a range including an adjustable five-metre infrared proximity sensor for harsh industrial environments.

Read more...
The data-driven path to sustainable manufacturing
ifm - South Africa Editor's Choice Sensors & Transducers
Smart automation is closing the gap between operational efficiency and environmental responsibility, and the data to do it is already inside the plant. With ifm’s sensing and digitalisation technologies, manufacturers can turn machine intelligence into measurable sustainability gains.

Read more...
Expanding visibility in mining operations
Emerson Automation Solutions Editor's Choice Sensors & Transducers
Advances in wireless communications, condition monitoring and sensing technologies are helping mining operators extend measurement into previously under-monitored areas, improving equipment reliability, process performance and water stewardship.

Read more...
Fiber-optic amplifiers for precise object detection
ifm - South Africa Sensors & Transducers
The OCF fibre-optic amplifier detects even the smallest or most transparent objects in confined spaces, making proven fibre-optic technology easier and more user-friendly than before.

Read more...
The next era of measurement and instrumentation
Sensors & Transducers
Smart sensors and non-contact radar are reshaping industrial measurement, feeding connected platforms that predict failures before they happen.

Read more...
Distance sensor for confined spaces
ifm - South Africa Sensors & Transducers
The O6D100 from ifm has been designed as a powerful all-rounder for typical applications in object detection, distance measurement and positioning.

Read more...
Optimise sludge treatment and reduce operational costs
Endress+Hauser South Africa Sensors & Transducers
Endress+Hauser’s inline measuring devices, the Proline Teqwave MW 300 and the Proline Teqwave MW 500, determine the total solids content of wastewater directly through microwave transmission.

Read more...
Inclination sensors for motion control
ifm - South Africa Sensors & Transducers Motion Control & Drives
The JBC dynamic inclination sensor from ifm offers accurate angle measurement in the most demanding conditions, filtering out motion disturbances such as vibrations, shocks and vehicle dynamics to deliver reliable inclination values via IO-Link or programmable switch outputs.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved