Temperature Measurement


Thermocouple-based recorders

July 2005 Temperature Measurement

A line of N.I.S.T. traceable, thermocouple-based temperature recorders that can replace costly strip chart recorders in a variety of applications is being introduced by MadgeTech of Warner, New Hampshire.

MadgeTech thermocouple-based temperature recorders feature non-volatile solid-state memories for optimum data security, even if their batteries become discharged, and can be used with a PC for realtime data monitoring. Models include the OctTemp 8-channel unit that will read and record up to 14 563 measurements per channel, the QuadTemp 4-channel unit that handles up to 26 214 per channel, and single channel units that record 16 383 readings.

Providing accuracy within ±0,5°C (at 25°C), and 16-bit resolution, MadgeTech thermocouple-based temperature recorders are capable of reading rate from one every two seconds, to 12 hours (model dependent). Compatible with all common thermocouples including J, K, T, E, R, S, B, N, these fully portable, standalone devices are battery powered and can operate up to 10 years uninterrupted, depending on model.

For more information contact Ken Falconer, Vangard Digital, 011 913 3199, [email protected], www.vangard.co.za





Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Temperature measurement solution for foundry
Temperature Measurement
AMETEK Land, a world-leading manufacturer of infrared pyrometers, scanners and thermal imagers, is helping an Indian foundry to support metal quality and reduce ongoing costs.

Read more...
Supporting sustainable steelmaking
Temperature Measurement
AMETEK Land is helping the steel industry meet global decarbonisation challenges with a range of solutions.

Read more...
High-precision data loggers for wire and thermocouple probes
Senseca Temperature Measurement
Senseca, formerly the GHM Group, has launched new handheld meter/data loggers for Pt100 four-wire probes and thermocouple probes. These are redesigned with enhanced features.

Read more...
How wet steam undermines boiler efficiency
Endress+Hauser South Africa Temperature Measurement
Endress+Hauser understands the daily challenges and demands placed on energy and utility managers across the spectrum of steam generation, distribution and consumption activities. Its global team is committed to working with its partners to overcome these complexities, and particularly those that aim for a safe, economic and sustainable sitsce of steam energy production and delivery.

Read more...
Dramatically reducing greenhouse emissions
Temperature Measurement
Online teaser: There is considerable potential for reducing CO2 emissions in the mill process by optimising the heat source for drying. The most promising approach to achieving a carbon neutral process in a hot gas generator is the combustion of green hydrogen.

Read more...
Infrared camera for condition monitoring and early fire detection
Instrotech Temperature Measurement
The Optris PI 640i thermal imager is the smallest measuring VGA infrared camera, with a body-sized volume of 45 x 56 x 90 mm, and weighing only 269 to 340 g, depending on the lens. It counts among the most compact thermal imaging cameras on the market.

Read more...
Paint curing applications in the automotive industry
R&C Instrumentation Temperature Measurement
For successful paint cure, irrespective of the paint chemistry being used, there is a critical need to measure and control the temperature of the car body as it travels through the oven. Today, paint ovens are controlled in a sophisticated fashion via thermocouples located in each zone to give constant feedback on the ambient temperature.

Read more...
Universal temperature transmitter with drift detection
WIKA Instruments Temperature Measurement
The new model T38 digital temperature transmitter from WIKA enables extremely flexible and stable temperature measurement. The instrument offers a maximum of sensor connection combinations, and a new type of drift detection.

Read more...
Temperature monitoring in the metal casting process
Instrotech Temperature Measurement
During metal casting, the liquid material is poured into a mould, and after solidification becomes a solid body. Both too-high and too-low casting temperatures can lead to quality defects. The compact Optris PI 05M infrared thermal imaging camera from Instrotech can monitor the casting process.

Read more...
Pyrometer range with enhanced features
Temperature Measurement
AMETEK Land has relaunched its market-leading SPOT pyrometer range with enhanced features and benefits for a wide range of industrial applications. The new SPOT+ family offers a wide range of temperature measurement from 50 to 3500°C, and a choice of different wavelengths for applications including metals, glass, cement and lime kilns, and foundries.

Read more...