Solid electrolyte pH probes

May 2005 Maintenance, Test & Measurement, Calibration

Specifically for applications in heavily polluted media, emulsions, dispersions, or for use in media containing proteins and sulphides, JUMO's new pH electrodes ensure that measurement is performed reliably and economically. The electrodes use a polymer-based solid electrolyte and annular gap diaphragm that is characterised by a high immunity to interference. This combination obviates diaphragm clogging.

For application in general aqueous solutions (swimming pool monitoring, drinking water treatment, aqueous media without any dirt changes, media containing few ions), pH sensors with gel filling and ceramic diaphragms can continue to be used. As a result of the direct contact between the electrolyte and the medium, an increased thinning effect has to be expected in such media with solid-electrolyte electrodes, which would considerably reduce the operational life of the electrode. The solid electrode is free from silver chloride, which makes it insensitive to sulphide ions. In order to increase the operational life of the electrode, the electrolyte has been provided with solid potassium chloride (KCl) that is finely distributed in the gel. As a result the electrolyte becoming clearer in appearance as its useful life is depleted, providing a useful indication of when replacement will be necessary.

The JUMO Ag/AgCl conductive system - tried and tested for many years - is used as a reference system. The solid electrolyte securely encloses the reference system. The U glass permits operation at temperatures ranging from -5 to +80°C. The electrode withstands pressures up to 600 kPa and can be installed in existing fittings via a Pg13.5 gland. On request a Pt100 or Pt1000 temperature probe can be integrated.

For more information contact Anastas Schnippenkotter, ASSTech Process Electronics & Instrumentation, 011 794 7057.

Further reading:

Infrared thermometers for electrical, industrial and HVAC applications
Comtest Maintenance, Test & Measurement, Calibration
: Comtest, distributor of Fluke test and measurement equipment, explains how handheld infrared thermometers are transforming maintenance in electrical, industrial and HVAC environments, with three measurement strategies and a wide range of practical applications.

Read more...

---

Reverse-engineering legacy industrial gearbox parts
Maintenance, Test & Measurement, Calibration
WEG Africa’s turbine workshop uses 3D scanning technology to reverse-engineer components for legacy gearboxes, turbines and compressors, enabling equipment to run for decades after OEM support and spare parts have dried up.

Read more...

---

Unlocking ICCP remote monitoring
Omniflex Remote Monitoring Specialists Maintenance, Test & Measurement, Calibration
Cathodic protection keeps buried and submerged pipelines safe from corrosion, but verifying it traditionally means costly, hazardous manual site visits. Omniflex explains how a retrofit module brings remote monitoring to ageing transformer rectifiers without replacing functional infrastructure.

Read more...

---

Microdieseling – the explosions you never hear
Maintenance, Test & Measurement, Calibration
Microdieseling is a pressure-induced thermal degradation mechanism in which entrained air bubbles are compressed so rapidly that the surrounding oil ignites, producing soot, varnish and sludge. WearCheck explains how it happens, why the damage varies, and how oil analysis detects it.

Read more...

---

Electrostatic spark discharge – when static strikes back
Wearcheck Maintenance, Test & Measurement, Calibration
WearCheck technical manager, Steven Lumley explains how static electricity accumulates in modern low-conductivity lubricants, why compact system designs and fine filtration make ESD more likely, and how to recognise the degradation it leaves behind.

Read more...

---

High-speed cameras for crash testing
Horne Technologies Maintenance, Test & Measurement, Calibration
Vision Research has expanded its Phantom C-series with two cameras optimised for crash and safety testing, offering 4 and 8 megapixel sensors rated to 170G, up to 1180 frames per second, and Phantom Academy application training planned for South Africa next year.

Read more...

---

SKF extends remanufacturing expertise to bearing clearance modification
SKF South Africa Maintenance, Test & Measurement, Calibration
Using its clearance modification expertise, SKF helped a mining equipment OEM salvage spherical roller bearing inventory that would otherwise have been scrapped, confirming a new capability within its remanufacturing services and avoiding redundant procurement.

Read more...

---

When maintenance-system compliance starts replacing plant reliability
Wearcheck Maintenance, Test & Measurement, Calibration
WearCheck ARC division manager, Annemie Willer argues that the greatest threat to effective maintenance is no longer a lack of technology, but the gradual replacement of technical judgement by CMMS compliance, leaving no one owning the machine.

Read more...

---

Automatic lubrication systems drive mobile mine machine reliability and uptime
SKF South Africa Maintenance, Test & Measurement, Calibration
SKF’s Lincoln P203 progressive lubrication systems are improving reliability and uptime on mobile machines at a Zambian gold mine, with installation of 45 units completing by October 2026.

Read more...

---

Nitration: the acid you didn’t see coming
Wearcheck Maintenance, Test & Measurement, Calibration
Nitration is as destructive as oxidation in many engines but far less understood. WearCheck technical manager, Steven Lumley explains how nitrogen oxide gases degrade lubricants, why the process is difficult to detect, and what oil analysis can reveal before damage occurs.

Read more...

---