With the introduction of the Altosonic V, Krohne says that it pioneered multibeam measurement, multiproduct measurement, and custody transfer. The success of Altosonic V was a major reason for ultrasonic measuring technologies to be accepted by the American Petroleum Institute.
Following this endorsement, there became an obvious need for an ultrasonic flowmeter for single products that would offer all the advantages of ultrasonic flowmeters plus the custody transfer needed in this industry. The Altosonic III is the first of a new generation of custody transfer ultrasonic flowmeters to replace turbines and PDs in the measurement of light liquid hydrocarbons.
The Altosonic III is superior to a turbine or PD meter in the following areas:
* No moving parts nor intrusive parts, so no clogging, scaling or blockage.
* No periodic re-calibration because of drifting results.
* Long-term stability and high reliability.
* No wear and tear and therefore no costs for maintenance and again re-calibration, which would often necessitate removal of the meter.
* No pressure loss, means no need to upsize pumps, with the corresponding costs for procurement and electricity costs.
* No need for costly strainer, and therefore no cleaning costs, no mesh to become clogged.
* Altosonic III is bi-directional, and has built-in redundancy due to the three beams. However, failure of one of the beams is not to be expected considering the reliability observed in Krohne's ultrasonic equipment.
For custody transfer, the meter offers 0,2% accuracy and is compliant with OIML R-117. Retrofitting is easy, and the Altosonic III with a simple straightener slots straight into the position taken by a turbine.
Never waste a drop
Flow Measurement & Control
Manufacturers of pumps, valves and related equipment have an important role to play when systems for water are being designed or upgraded and should be included at every stage of a project to ensure that the work is carried out within the equipment’s capabilities.
Read more...Ultrasonic flow meters ifm - South Africa
Flow Measurement & Control
The ultrasonic flow meter of the SU series from ifm - South Africa monitors liquid media such as water, glycol solutions or industrial oils. It detects the three process categories volumetric flow quantity, consumed quantity and medium temperature.
Read more...How utilities identify water losses in Northern Europe
Flow Measurement & Control
Norwegian leak detection specialist, Ovarro outlines how municipalities are responding to hidden water loss using acoustic monitoring and analysis tools that provide early indications of developing leaks.
Read more...Senix sensors provide flood warnings Instrotech
Flow Measurement & Control
To create the world’s most sophisticated flood monitoring and forecasting system, the US State of Iowa’s Flood Centre (IFC) uses more than 200 Senix ToughSonic 30 and ToughSonic 50 ultrasonic sensors to measure water levels in streams across the state.
Read more...Mastering inline LNG flow monitoring
Flow Measurement & Control
[Sponsored] As global demand for cleaner, more flexible energy sources continues to rise, liquefied natural gas (LNG) stands at the forefront of the energy transition. Engineered for excellence in cryogenic environments, the Anton Paar L-Cor 8000 flowmeter redefines inline LNG flow monitoring.
Read more...Dosing chlorine gas safely and sustainably
Flow Measurement & Control
Chlorine gas is central to a range of industrial processes but is highly dangerous. The solution is the deployment of a system solution for chlorination from Lutz-Jesco.
Read more...Oil monitoring solution drives performance gains for paper mill SKF South Africa
Flow Measurement & Control
By integrating real-time monitoring with precise flow control, SKF’s Flowline oil monitor meters have significantly improved the flow rate control and performance of oil circulation lubrication systems installed on a paper mill.
Read more...Flow measurement in mobile applications ifm - South Africa
Flow Measurement & Control
The SU Puresonic Mobile ultrasonic sensor from ifm is characterised by its displayless design and high temperature resistance. It is ideal for mobile applications and processes with permanent media temperatures of up to 120°C.
Read more...Optimising water quality in a building cooling system ifm - South Africa
Flow Measurement & Control
A leading company in industrial water management has installed water treatment systems that not only optimise water quality but also help customers to improve their processes, thanks to the new insights and actions that can be generated based on the process data collected.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version