Level Measurement & Control


Radar level gauge for low dielectric product

April 2004 Level Measurement & Control

A major European pharmaceutical manufacturer has adopted Krohne's BM 70 radar level gauge as standard for the complex level measurement of low dielectric products in its reactor pans across the UK, after it outperformed a range of competitors' equipment

The manufacturer needed to measure levels in heated glass-lined reactor vessels, or 'pans', containing a mix of solvents, namely Toluene and water used in development trials and production duties. The low dielectric of the product, around 2.0, required careful antenna selection to ensure continuous accurate measurement.

Load cells had previously been used to measure the levels, but some of these were over 14 years old and caused problems due to their inaccuracy and high maintenance costs. Krohne began field trials on the application with its BM 70 continuous, non-contact FMCW (frequency modulated continuous wave) level meter. A BM 70 was fitted with a 6" horn antenna and a high-temperature extension, ensuring suitability for excessive product temperatures. Since the tank opening was only 4" in diameter, Krohne fitted the gauge with an antenna extension, allowing the antenna to be fitted from inside the pan.

After several months of comparative trials using Krohne products and competitors' equipment, Krohne's BM 70 proved to be the gauge achieving the most reliable results. The manufacturer subsequently decided to use Krohne radar level gauges on its pans that were being updated. All BM 70 gauges were supplied with FFKM seals and Hastelloy antennae, offering excellent corrosion resistance and ensuring their suitability for any other level applications on site.

The gauges were also supplied with Ex-i current outputs with Hart protocol allowing remote programming and communication with Krohne PC-CAT software for windows. PC-CAT allows convenient remote control of all functions of the signal converter. The vessel can be shown in schematic form together with all the associated measured values. PC-CAT files can later be used to analyse the performance of the level gauge.

To date, Krohne has supplied the manufacturer with over 100 BM 70 level gauges, and has also installed BM 70 A PTFE wave sticks on smaller vessels, typically around one metre high. BM 70 wave sticks can be fitted on DN50 flanges due to their slim profile. Krohne's BM 70 level gauge is widely used for highly accurate level and volume measurement of liquids, pastes, slurries, solids and particulate materials in storage and process tanks.

For more information contact Gordon Duff, Krohne SA, 011 315 2685, [email protected], www.krohne.co.za



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Precision in paper processing
VEGA Controls SA Editor's Choice Level Measurement & Control
Paper manufacturing is a demanding process that relies on consistency, precision and control at every stage. The VEGABAR 82 pressure transmitter is well-suited to these harsh environments.

Read more...
Where every grain counts
VEGA Controls SA Level Measurement & Control
VEGA’s advanced level and pressure measurement solutions offer transformative technologies to improve grain storage management in sub-Saharan Africa.

Read more...
Small, inexpensive radar level transmitters
VEGA Controls SA Level Measurement & Control
Anyone who needs to keep processes running needs level measurement technology that measures reliably. However, what is needed is not always the most ‘fully featured’ solution, but the smartest one. This is exactly what VEGAPULS radar transmitters of the BASIC series do.

Read more...
Meeting the challenges of tank obstructions interfering with radar
Level Measurement & Control
One of the most challenging applications for non-contacting radar level transmitters is measuring level in tanks with internal obstructions, such as agitators, heating coils, pipes, ladders or baffles. Rosemount non-contacting radar level transmitters from Emerson feature an advanced solution that enables accurate and reliable level measurements in tanks with obstructions.

Read more...
A fresh approach to dairy processing
VEGA Controls SA Level Measurement & Control
Ensuring the quality and safety of milk throughout the production process is of the utmost importance in the dairy industry. The VEGABAR pressure transmitters are suitable for hygienic applications. They are an asset in the dairy industry and have been used with success for measuring the milk level and the process pressure in storage tanks.

Read more...
Multiphase level measurement
Mecosa Level Measurement & Control
The measurement of more than two phases or of interfaces that are not clearly defined poses a number of challenges for measurement technology. Radiation-based measuring systems such as Berthold‘s EmulsionSENS master these problems.

Read more...
Simple and efficient level measurement in the mining, minerals and metals industries
Endress+Hauser South Africa Editor's Choice Level Measurement & Control
Measuring devices in the mining, minerals and metals industries face the challenge of varying material states and long distances in measurement height. Endress+Hauser’s answer to these challenges is the new Micropilot family.

Read more...
Level measurement of an acid dosing tank at a WWTP
Level Measurement & Control
Ferric chloride and other acids are essential chemical substances in water and wastewater treatment. To control the dosing of acid solutions, an Australian wastewater treatment plant uses a special container to store, mix and add these chemicals. The company opted in favour of KROHNE’s OPTIWAVE 1540 radar level transmitter

Read more...
Powering sub-Saharan Africa’s energy future
VEGA Controls SA Level Measurement & Control
Crude oil storage plays an important role in the energy infrastructure of sub-Saharan Africa. The management of crude oil storage in comes with numerous challenges, including safety concerns, environmental conditions and infrastructural limitations.

Read more...
A new era in radiometric level and density measurement
Mecosa Level Measurement & Control
The LoopSeries LB 430 radiometric detector from Berthold Technologies has a revolutionary power solution and sets new standards in level and density measurement.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved