Yokogawa Electric Corporation is offering its Centum CS 3000 R3.04, the latest version of its flagship Centum CS 3000 R3 integrated production control system. The functionality of this new product has been greatly enhanced with the inclusion of a new FFCS compact controller that enables the control system to accommodate a wider range of applications, including small-scale plants. This contrasts with earlier versions of the Centum CS 3000 R3 series, which were aimed mainly at medium- to large-scale process plants in the oil and chemical industries.
The development of the R3 series has been based on the concept of continually adopting new functions while maintaining continuity with existing functions. This control system has evolved in quick response to changing customer needs and through the ongoing development and introduction of leading-edge technologies.
Product features
* FFCS compact controller for small- and medium-scale plants: offering reliability that is essential for DCS as well as cost-effectiveness make it suitable for small- to medium-scale plants. 20% the size of a conventional controller, the FFCS has the same reliable architecture, control functions and fully redundant configuration as the controllers used by large plants.
* Enhanced Fieldbus capability: the controller supports Profibus DP-V1, which is the standard in discrete manufacturing processes. The Foundation Fieldbus capability is also improved, providing smaller systems the same functions such as integrated operation and monitoring environments and full-redundant systems that are found in large systems.
* Increased subsystem connectivity: a subsystem gateway station was developed which employs OPC (OLE for process control), the industry-standard, general-purpose interface used in process control. This has improved connectivity with electrical facilities, machining equipment, and other subsystems.
About Yokogawa South Africa
Yokogawa South Africa was originally founded in 1978 as Delta Controls, the exclusive distributor of Yokogawa Process Control and Instrumentation (PCI) products in South Africa. In 1997 Delta Controls became a wholly owned subsidiary of Yokogawa Europe. Yokogawa South Africa has its head office in Johannesburg and has branches in Vanderbijlpark, Durban and Cape Town. Main Yokogawa product groupings are: recorders, controllers, transmitters, flowmeters, analytical (liquid and gas) as well as distributed control systems. The company is also the exclusive distributor for American Meter and Dresser gas equipment, Barksdale pressure and level devices and Kinetrol Actuators.
Advanced DCSs preserve what must not change while enabling Schneider Electric South Africa
PLCs, DCSs & Controllers
Next-generation DCSs, such as Schneider Electric’s Foxboro, are preserving the best of the old while introducing the new in a less disruptive manner.
Read more...DCS for maximum plant efficiency and reliability ABB South Africa
PLCs, DCSs & Controllers
ABB has introduced SPR2025, the latest Symphony Plus DCS package release to enable modernisation and efficient performance for the process and power industries.
Read more...Robust PLC for field applications ifm - South Africa
PLCs, DCSs & Controllers
ifm is a leading suppliers of robust control systems for mobile use. Its ecomat series comprises PLCs, I/O modules and sensors that can withstand the harsh environmental influences of mobile applications.
Read more...ABB’s new flagship DCS ABB South Africa
PLCs, DCSs & Controllers
ABB has launched the latest version of its flagship distributed control system, to help industrial operators modernise without disruption and accelerate their path toward next generation automation.
Read more...Adroit Technologies drives global SCADA for Iochpe-Maxion Adroit Technologies
PLCs, DCSs & Controllers
Adroit Technologies has been appointed by Iochpe-Maxion, parent company of one of the world’s largest wheel manufacturers and producers of structural components in the Americas, as its global SCADA partner. The partnership will standardise operational visibility, reliability and control across 34 manufacturing facilities worldwide.
Read more...Extended DCS enables industrial innovation with continuity ABB South Africa
PLCs, DCSs & Controllers
ABB has introduced its Automation Extended programme, a strategic evolution of its distributed control systems (DCS), designed to help industries modernise without disruption.
Read more...Valmet’s automation powers world’s largest air-to-water heat pump Valmet South Africa
PLCs, DCSs & Controllers
Valmet will supply an automation system for Helen’s Patola air-to-water heat pump plant and two electric boilers currently being built in Helsinki, Finland. When completed, the air-to-water heat pump plant will be the largest in the world with a full heating production capacity around 30 MW.
Read more...All eyes on the modern DCS platform Schneider Electric South Africa
PLCs, DCSs & Controllers
Modernised DCS platforms are no longer confined to hardware-dependent architectures. These systems have evolved to combine the strengths of both PLCs and DCS while adding capabilities that make them more open, resilient and collaborative.
Read more...Automation solution for waste management at incineration facility
PLCs, DCSs & Controllers
Valmet is to deliver an automation system to Seongnam City’s incineration facility currently under construction in South Korea. By leveraging intelligent automation, the plant will optimise energy production, minimise emissions and deliver efficient, consistent performance throughout its entire lifecycle.
Read more...Valmet’s supplies DCS to Europe’s largest electric boiler plant Valmet South Africa
PLCs, DCSs & Controllers
Valmet will supply an automation system to Helen’s Hanasaari electric boiler plant and a thermal accumulator being built in Helsinki, Finland. Once completed, it will be Europe’s largest electric boiler plant.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version