Sensors & Transducers


Surface gloss sensors

November 2003 Sensors & Transducers

ASSTech's German principal Wenglor has developed a sensor that is capable of determining the level of gloss on a surface. The colour of the object and the distance between the surface and the sensor are of almost no significance, because the measuring method does not depend on these quantities. The sensor measures the degree of gloss at a given object, ie the relationship between reflection and remission of light returned from the object.

Visible laser light and a large opening angle make it very easy to adjust the sensor to the respective application. Further advantages include compact dimensions: 16 x 26 x 57,5 mm and a working range of 2,5 to 40 mm.

Typical applications include the recognition of transparent labels on various backings, glass and plastics; the application of paint layers and the drying status of various coatings can also be monitored reliably by these sensors.

ASSTech also represents the following agencies: Gantner - data acquisition, controller and data-logger modules; Inducoder - shaft encoders; Rechner - capacitive and inductive sensors, opto-electronic, calorimetric flow sensors and magneto-resistive sensors; Jumo - professionals in process control; Burster - calibration and test equipment and Wöhrle - intelligent display systems.

For more information contact Anastas Schnippenkotter, ASSTech Process Electronics & Instrumentation, 011 794 7057.





Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Market opportunity for sensors in humanoid robots
Sensors & Transducers
A new IDTechEx report forecasts the market for sensors in humanoid robots will exceed $6,59 billion by 2037, driven by perception sensors, force/torque sensors, encoders and inertial measurement units across a growing range of commercial robot platforms.

Read more...
The wireless route to safer, more efficient mining operations
Emerson Automation Solutions Editor's Choice Sensors & Transducers
Modern wireless level measurement technologies are helping mining operations improve process control, increase safety and reduce installation costs. Emerson’s Rosemount 3408 wireless non-contacting radar level transmitter uses 80 GHz frequency-modulated continuous wave radar with HART communication to reach remote assets where cabling is impractical.

Read more...
Telco sensors for harsh environments
Sensors & Transducers
Telco sensors are designed to operate where moisture, particulate contamination and surface fouling would disable conventional sensors, with a range including an adjustable five-metre infrared proximity sensor for harsh industrial environments.

Read more...
The data-driven path to sustainable manufacturing
ifm - South Africa Editor's Choice Sensors & Transducers
Smart automation is closing the gap between operational efficiency and environmental responsibility, and the data to do it is already inside the plant. With ifm’s sensing and digitalisation technologies, manufacturers can turn machine intelligence into measurable sustainability gains.

Read more...
Expanding visibility in mining operations
Emerson Automation Solutions Editor's Choice Sensors & Transducers
Advances in wireless communications, condition monitoring and sensing technologies are helping mining operators extend measurement into previously under-monitored areas, improving equipment reliability, process performance and water stewardship.

Read more...
Fiber-optic amplifiers for precise object detection
ifm - South Africa Sensors & Transducers
The OCF fibre-optic amplifier detects even the smallest or most transparent objects in confined spaces, making proven fibre-optic technology easier and more user-friendly than before.

Read more...
The next era of measurement and instrumentation
Sensors & Transducers
Smart sensors and non-contact radar are reshaping industrial measurement, feeding connected platforms that predict failures before they happen.

Read more...
Distance sensor for confined spaces
ifm - South Africa Sensors & Transducers
The O6D100 from ifm has been designed as a powerful all-rounder for typical applications in object detection, distance measurement and positioning.

Read more...
Optimise sludge treatment and reduce operational costs
Endress+Hauser South Africa Sensors & Transducers
Endress+Hauser’s inline measuring devices, the Proline Teqwave MW 300 and the Proline Teqwave MW 500, determine the total solids content of wastewater directly through microwave transmission.

Read more...
Inclination sensors for motion control
ifm - South Africa Sensors & Transducers Motion Control & Drives
The JBC dynamic inclination sensor from ifm offers accurate angle measurement in the most demanding conditions, filtering out motion disturbances such as vibrations, shocks and vehicle dynamics to deliver reliable inclination values via IO-Link or programmable switch outputs.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved