Maintenance, Test & Measurement, Calibration

Vertical/horizontal bargraph indicators

April 2003 Maintenance, Test & Measurement, Calibration

Timecount is offering a light-strip bargraph indicator range with or without digital display and is available in either vertical or horizontal formats.

Measuring 144 x 36 mm, the Dinalog A1400 is suitable for all applications that require simultaneous monitoring of several measurement values. The high contrast display with 71 LEDs ensures good legibility in darkrooms, even from awkward angles.

Indicators can be equipped with various measuring modules to measure inputs of DC voltages ranges starting at 0 to 60 mV and going as high as 700 V, DC currents from 200 µA to 300 mA, AC voltages from 0,2 to 700 V, AC current from 2 mA to 5 A, resistance from 0,2 Ω to 20 kΩ - and temperature with Pt100 or thermocouples J, K, R and S.

Measuring span can be programmed with the front panel keys for the digital display, as well as for the light-strip. Adjustable limit value functions are also included for limit monitors. Limit value adjustment is accomplished with the same keys, but at a separate programming level, which eliminates the possibility of inadvertent alteration of the indicator function during limit value selection.

A variety of display combinations are available such as dual display, dual input, dual alarm, single display/single input or four alarms. All programmable values remain in memory, even if a power failure should occur. All selected parameters can be protected against alteration by means of hardware configuration with an external contact. The Dinalog is suitable for grid mounting via mounting tabs. Connection is on screw terminal blocks for wire with a cross section of up to 2,5 mm2. The standard power supply is 230/115 V a.c./90 to 260 or 18 to 36 V d.c. and 24 V a.c.

For more information contact Jos Laurencik, Timecount, 011 882 3105,,


Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Gas instrument maintenance made easy
September 2021, Comtest , Maintenance, Test & Measurement, Calibration
Comtest is offering iNet Exchange that allows customers to say goodbye to gas instrument maintenance and say hello to an always-ready instrument fleet.

Compressed air purity analyser
September 2021, Artic Driers International , Maintenance, Test & Measurement, Calibration
These SUTO-iTEC units ensure that c/air systems comply with the relevant ISO 8573 air standard.

Remote monitoring for CP systems
August 2021, Omniflex Remote Monitoring Specialists , Maintenance, Test & Measurement, Calibration
PowerView iREF8 allows businesses to add remote monitoring to existing cathodic protection (CP) systems.

Online monitoring of haul trucks
August 2021, SKF South Africa , Maintenance, Test & Measurement, Calibration
IMx-16 Multilog online monitoring systems on two mobile mining haul trucks at a leading copper mine in Zambia predict critical component failures and allow for planned predictive maintenance procedures to be carried out.

Monitoring oil and gas pipelines
August 2021, RJ Connect , Maintenance, Test & Measurement, Calibration
Moxa’s MDS-G4020 series offers a modular platform that can be fitted with fibre interfaces to connect pipeline subsystems to a control centre over long distances.

Non-contact meter for voltage measurements
August 2021, Comtest , Maintenance, Test & Measurement, Calibration
The new Fluke 377 FC and 378 FC Non-Contact Voltage True-RMS AC/DC Clamp Meters can measure voltage and current simultaneously without touching a live wire.

Optimum efficiency at healthcare facilities
Technews Industry Guide: Sustainable Manufacturing 2021, Comtest , Maintenance, Test & Measurement, Calibration
Comtest solutions to help surpass safety standards with optimum efficiency.

Remove water from factory air
Technews Industry Guide: Sustainable Manufacturing 2021, SMC Corporation South Africa , Maintenance, Test & Measurement, Calibration
A leading cause of costly downtime and emergency maintenance is water vapour and the resulting condensed water that is trapped in factory compressed air.

Mitigating manufacturing downtime with smart services
Technews Industry Guide: Sustainable Manufacturing 2021, Schneider Electric South Africa , Maintenance, Test & Measurement, Calibration
The reliability of equipment forms a fundamental part of business sustainability, particularly when it comes to production continuity and downtime avoidance.

Lubrication oil filtering and monitoring with Hydrasales
July 2021, Hydrasales , Maintenance, Test & Measurement, Calibration
The viscosity of oil in a lubricating system and its impact on bearings if not appropriately filtered, can adversely impact on system performance and even have catastrophic consequences.