News


Environmentally friendly fire suppression solutions

May 2014 News

A recent news report by Sky News commented that the impact of climate change is likely irreversible. The comments came following a report commissioned by governments of 195 countries. The report forms part of the second chapter of the 5th assessment by the IPC, set up in 1988, to provide neutral and scientifically based guidance to governments. The last overview was published in 2007 and strived, but failed, to forge a worldwide treaty on climate change in Copenhagen in 2009.

It seems governments have a different outlook this time around

The problem is engineers and designers need to provide fire protection for hazards such as computer rooms, sub-floors, tape storage, telecommunications/switchgear, vaults, process equipment and all normally occupied or unoccupied electronic areas where equipment is either very sensitive or irreplaceable. The fire protection needs to increase reliability while reducing the overall environmental impact. While many might consider water the logical choice this particular solution presents a number of issues when used with electrically powered equipment.

Gaseous fire protection systems and the like tend to be the best possible route to protect these types of applications. However, many of the gases used in these systems on the market as well as fire protection fluids are halon replacements and, while currently allowed, are starting to come under scrutiny. With the release of this latest report chances are their future viability will be questioned and no doubt, regulations will likely become tighter.

So where does that leave users? The likelihood is suppliers will begin to offer all sorts of deals and promises in an attempt to move as much product as possible before they are banned.

How to avoid the trap

There is an easy solution to this conundrum, one that promises lifetime protection against regulatory bans. The solution is a mixture of two inert (oxygen diluting) gases: 50% nitrogen and 50% argon known as Pyroshield. As the Pyroshield agent is derived from gases present in the earth’s atmosphere, it exhibits no ozone depleting potential, does not contribute to global warming, nor does it contribute unique chemical species with extended atmospheric lifetimes. The Pyroshield agent is composed of atmospheric gases; it does not pose the problems of toxicity associated with the chemically derived halon alternative agents. It is the number one choice in protecting high value assets. Pyroshield’s production meets all the criteria set out in the Montreal and Kyoto protocols, thus it will never be phased out, unlike the halogenic gases.

Pyroshield gas extinguishes fire by lowering the oxygen content below the level that supports combustion. When the Pyroshield agent is discharged into a room, it introduces the proper mixture of gases that still allow a person to breathe in a reduced oxygen atmosphere. The normal atmosphere in a room contains 21% oxygen. If the oxygen content is reduced below 15%, most ordinary combustibles will cease to burn. Pyroshield will reduce the oxygen content to approximately 12,5%.

Alien Systems & Technologies manufactures the Pyroshield fire suppression system

This is an engineered system utilising a fixed nozzle agent distribution network. The Pyroshield system is SABS approved and was also the winner of the 2003 SABS Design Institute Award for Engineering. The system is designed and installed in accordance with the National Fire Protection Association (NFPA) Standard 2001, ‘Clean Agent Fire Extinguishing Systems’.

When properly designed, the Pyroshield system will extinguish surface burning fire in Class A, B and C hazards. The system can be actuated by detection and control equipment for automatic system operation along with providing local and remote manual operation as needed. Accessories are used to provide alarms, ventilation control, door closures, or other auxiliary shutdown or functions.

The system is particularly useful for suppressing fires in hazards where an electrically non-conductive medium is essential or desirable; where clean-up of other agents present a problem; or where the hazard is normally occupied and requires a non-toxic agent.

For more information contact Samantha Wright, Alien Systems & Technologies, +27 (0)11 949 1157, [email protected], www.astafrica.com



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Reinstatement opportunity for ECSA registration
News
In 2023 the Engineering Council of South Africa (ECSA) announced a special opportunity for engineers in South Africa to reinstate their registration status if it had been cancelled. This exclusive offer is available until the end of August 2024.

Read more...
Africa Automation Indaba 2026
News
A bold new chapter in Africa’s industrial evolution begins with the launch of the Africa Automation Indaba, set to take place from 13 to 14 May 2026 at the prestigious Radisson Collection Hotel in Cape Town.

Read more...
EtherCAT Technology Group holds another Plug Fest
News
Recently, the EtherCAT Technology Group (ETG) once again invited its members to a Plug Fest, this time specifically targeting developers and manufacturers of devices with Safety over EtherCAT (FSoE) functionality.

Read more...
BMG powers up at Nampo 2025
News
The BMG team was highly prominent at this year’s Nampo agricultural show, held near Bothaville recently. This prestigious event, which is one of the largest agricultural exhibitions in the southern hemisphere, is a highlight for manufacturers and suppliers of farming equipment, as well as for farmers, families and the entire community.

Read more...
Epiroc rocks youth development programmes
News
Epiroc is not just building equipment - it’s building futures. Through its dynamic internship and learner programmes, the mining equipment and services specialist is shaping South Africa’s next generation of skilled professionals, equipping them with real-world experience, industry knowledge and the confidence to launch successful careers.

Read more...
Schneider Electric drives innovation in Africa
Schneider Electric South Africa News
Schneider Electric has officially launched its first Innovation Hub on the African continent, coinciding with the opening of its new regional headquarters in Midrand, South Africa.

Read more...
Schneider Electric South Africa certified as 2025 Top Employer
Schneider Electric South Africa News
Schneider Electric is proud to announce its South African operation has been awarded Top Employer 2025 certification by a global authority in HR excellence, Top Employers Institute.

Read more...
100 years of safety leadership
News
DEKRA Industrial and its adult-based education and occupational skills training division, the Institute of Learning (IOL) will showcase a milestone at A-OSH 2025, as the company celebrates DEKRA Global’s 100 years of safety leadership.

Read more...
Drakenstein Municipality aces Schneider Electric’s Sustainability Impact Award
Schneider Electric South Africa News
Drakenstein Municipality in the Western Cape has won a Sustainability Impact Award for Schneider Electric’s Anglophone Africa region, shining the spotlight on its unwavering commitment to sustainable leadership and its forward-thinking approach to ensuring a sustainable future for its coming generations.

Read more...
LH Marthinusen launches new industrial fan manufacturing and services factory
News
LH Marthinusen has launched its new industrial fan manufacturing and services factory in Ekurhuleni. THis is a major milestone for South African energy infrastructure growth.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved