Industrial wireless access point
February 2010
Data Acquisition & Telemetry
Advantech’s EKI-6311G is a combined wireless access point, client bridge and repeater, which offers standards-based and licence-free wireless connectivity for industrial devices, equipment, and applications. For maximum flexibility, EKI-6311G supports multiple operating modes. As an access point, it allows wireless devices to communicate with each other and with 10/100Base-TX Ethernet wired networks. For applications where a wireless extension cord is required, client bridge operation connects one or more wired devices to a wireless network. While combining both of these modes, the unit operates as a wireless repeater to extend wireless coverage areas.
The unit is enclosed in a dust-tight and water-tight weatherproof plastic enclosure. With its IP65 rating it can be used in a number of different applications, ranging from indoor plant/factory locations to outdoor use. A single conduit connection is all that is required for both external power and wired network connections.
EKI-6311G supports enterprise standards such as WPA2 (WiFi Protected Access 2) and 802.1x remote authentication, for secure wireless communications to ensure that only authorised users and devices are permitted access. Two detachable antennas are included, in addition to a wall or mast mounting bracket. An in-line PoE (Power over Ethernet) injector simplifies installation by providing power to the unit over the same Cat5e cable that connects it to the network. For setup, all that is required is a PC or laptop equipped with a web browser.
For more information contact Elton Prytz, ProMicro, +27 (0)11 706 7913, [email protected], www.promicro.co.za
Further reading:
RFID tunnel solution for intralogistics
Data Acquisition & Telemetry
Turck Banner’s new UHF-SYS-TUNNEL RFID tunnel offers a ready-to-use, flexible detection solution for the automation of intralogistics processes.
Read more...
Taking control of your warehouse stock is no walk in the park
TransLution Software
Data Acquisition & Telemetry
Most companies focus on their production operations as a pain point. This is a mistake, as scheduling, moving, tracking and reporting on inventory at the operational level can have a major impact on production efficiency and profitability.
Read more...
The industrial era of wireless telemetry and radio communication
Schneider Electric South Africa
Data Acquisition & Telemetry
Today’s advanced wireless telemetry offers a range of benefits that go beyond cost savings, including greater flexibility and mobility, remote monitoring capabilities, and enhanced safety.
Read more...
Connecting every transport node
RJ Connect
Editor's Choice Data Acquisition & Telemetry
Stockholm's bus system strategically links urban mainline, suburban mainline, non-mainline routes, community service buses and night buses. To acquire and process data from multiple sources and analyse onboard information on their moving buses, Transdev sought a dependable and powerful onboard computer. It teamed up with CatAB, Moxa’s local representative, known for delivering top-notch industrial data communication boards and equipment since 1988.
Read more...
Paratus South Africa boosts Tantum IT’s connectivity with Eutelsat
Data Acquisition & Telemetry
Tantum IT is a leading IT service provider specialising in remote IT management, cloud services, and secure data handling for industries in remote and high-demand environments. To overcome its connectivity challenges, Tantum IT chose Paratus, an official distributer of Eutelsat OneWeb’s Low Earth Orbit services, to provide the solution.
Read more...
Wireless communication system for remote access to data
KROHNE
Data Acquisition & Telemetry
KROHNE has introduced the OPTIBRIDGE 3880 IIoT data logger for remote data services, acquisition and evaluation. It is a fully autonomous battery- or mains- powered wireless communication system for remote access to measurement data.
Read more...
New industrial tablet series for non-ex applications
Pepperl+Fuchs
Data Acquisition & Telemetry
Pepperl+Fuchs is introducing a rugged tablet series in accordance with
MIL-STD-810H. The slim Windows-based devices are available with a 20 or 25 cm display, offering numerous customisation options and an extensive range of accessories.
Read more...
New wireless communication system for remote access to measurement data
KROHNE
Data Acquisition & Telemetry
KROHNE has introduced the OPTIBRIDGE 3880 IIoT data logger for remote data services, acquisition and evaluation. This is a fully autonomous, battery- or mains-powered wireless communication system for remote access to measurement data, aimed at the water and wastewater industry.
Read more...
Programmable LED indicators
Turck Banner Southern Africa
Industrial Wireless Data Acquisition & Telemetry
Turck Banner is expanding its portfolio of LED lights with the robust LED indicators of the K100 series. These units improve workflow and reduce downtime through clearly communicated status information.
Read more...
Decoding the world of direct part marks
Omron Electronics
Data Acquisition & Telemetry
OMRON has unveiled its latest breakthrough, the V450-H ultra-rugged handheld scanner. Tailored specifically for industrial DPM reading, this innovative device sets new industry standards for durability and performance.
Read more...
printer friendly version