Electrical Power & Protection


Power the people

February 2015 Electrical Power & Protection

The energy world is changing. From a concentrated and centralised system discovered in 1888, the energy system is evolving to a decentralised system with diverse energy generation sources. There are two main factors causing this transformation: the introduction of information technology in the energy sector, and the emergence of alternative energy generation sources at scalable levels.

The convergence of information technology and energy

In the past 20 years, the Internet has connected 2,5 billion people together. In the coming years, this number will double. Concurrently the Internet will connect 40 billion machines to those 5 billion connected people. The next stage of connectivity is about machines. The combination of IT software with electrical devices and products provides customers with real-time information and smart services that allow all stakeholders an opportunity to implement active energy efficiency, share better energy, and consume at the right moment across smart grids.

Alternative energy generation sources

From the shale gas boom in America, to the rise of renewable in the energy mix, energy sources are widening and reaching scalability. The price of crystalline silicon photovoltaic cells for instance, have gone from $78 per Watt to $0,72 in less than four decades. Policy driven markets have facilitated the deployment of these technologies that are reaching grid-parity in many markets. As of the first quarter of 2014, there are 79 countries where price of photovoltaic electricity is equal to or less than the grid average price.

This wider choice in energy generation sources, combined with the emergence of information technologies in the energy sector, are redefining the energy ecosystems on demand and supply side and paving opportunities of increased efficiency at all levels, from people to power plant, to ensure a complete optimisation of the supply chain.

Impact on the entire energy chain

For consumers, the connection of energy systems, phones and machines in everyday life, provides real-time information on consumers’ needs and offers an opportunity to control their consumption. It reduces the consumers’ energy bill, and increases their purchasing power within a very short pay back. Access to real-time information and flexible, connected devices, allow consumers to change their consumption patterns. They are empowered to choose when, what and how they consume energy, presumably when electricity is cheap and green.

At the utilities and regional level, energy efficiency enables increasingly reliable supply and provides hedging against black outs. It also saves significant amounts in investments costs by avoiding the creation of new plants. Energy efficient technologies also save significant amounts by increasing resilience, security and anticipation of extreme weather conditions. Utilities can connect supply and demand, and offer new services to their customers, so that they consume less and at a more optimal time.

At a country level, the implementation of higher energy efficiency levels creates an economic opportunity for reduced public expenditure as governments balance their energy trades that are causing major strains on the economy. The EU energy balance has multiplied by 6 in 10 years, with oil imports alone reaching USD 500 bn in 2012 (Enerdata, 2013). The Efficient World Scenario put forward by the World Energy Outlook of the IEA, highlights that there could be USD 570 bn positive effect of the Energy Balance of five key regions, with China seeing USD 190 bn and India USD 110 bn of positive effect, through the implementation of a higher energy efficient scenario; as well as a huge potential for job creation, with estimates ranging from 800 000 to 1 million jobs by 2025 in a country like France (Ademe, OFCE, 2013).

Power the people

Individuals are at the centre of this new energy world, where roles are redefined. No doubt, utilities must keep their central role in this evolution and they are already rethinking the way they operate and address customers. Customers are changing in needs and behaviours, as well as demands. This transition needs solid change management to avoid over-production. All stakeholders, utilities, cities, facility managers, technology suppliers, should be prepared to continue an evolution in their roles, in business models and in technology offers. The transformation places consumers at the centre and opens the way for new models of consuming energy and managing resources. A reliable and simple technology is needed to guide all through the various transitions.

Technologies exist to harness this efficiency at all levels

The evolution of technologies through software and the Internet of Things are opening new means of optimising the overall energy chain through systems of integration. Such systems ensure that energy is safe, reliable, green, and efficient for the least amount of money. Already, by using the Internet to connect people to their environment, and their environment to the smart grid, by switching off automatically, by promoting consumption when energy is cheap and green, at least 30% savings is achieved through energy efficiency measures that do not involve major renovations or disturbances to the end-users – all this with paybacks under three years. Software now allows the curtailment of peaks. As an example, Schneider’s EnergyPool has curtailed over 1,7 GW of energy since its inception – equivalent to a nuclear reactor. Customers in buildings, industry, and data centres are offered a range of technologies, from products to systems and solutions that restrain energy use and allow saving energy throughout the entire chain.

While we should embrace cost-effective tactics to confront some of the major challenges of our generation – from resource scarcity, traffic congestion, pollution, and an increase in extreme weather conditions, as well as energy poverty and competitiveness – estimates show that over two thirds of energy efficiency’s cost-effective potential is still not being implemented.

Change is now

Market failures and resistance to change explain this untapped potential. Pay back times are short, within a few years, and investments are refunded by savings. Governments should therefore create environments to facilitate the implementation of energy efficiency and smart grids. They should enforce a level-playing field and ensure that all energy markets are free and competitive.

Transitions can be long. But this one is worthwhile and should be happening faster as it brings benefits to all: carbon emissions reduction; consumer purchasing power; job creation and country balance of payments and capital expenditure avoidance are the benefits. It is time to power the people and unleash a new world of energy that is digital, local and consumer focused.

For more information contact Ntombi Mhangwani, Schneider Electric South Africa, +27 (0)11 254 6400, [email protected], www.schneider-electric.com



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Africa’s net-zero ambition must become operational
Schneider Electric South Africa Electrical Power & Protection
Schneider Electric’s Rohit Chashta argues that the biggest gap in Africa’s green transition is not ambition but execution, and outlines how advisory services, bankable project roadmaps, digital visibility and SF6-free switchgear can turn sustainability commitments into measurable progress.

Read more...
High-efficiency half-brick DC-DC converters
Vepac Electronics Electrical Power & Protection
The Supreme series half-brick DC-DC converters from Vepac Electronics use synchronous rectification for high conversion efficiency, in a six-sided metal case built to withstand harsh industrial and transportation environments.

Read more...
Even in autonomous systems, human insight is important
Schneider Electric South Africa IT in Manufacturing
As AI, IIoT and digital twins reshape industrial operations, Schneider Electric’s Kobus Vermeulen and Bafana Msibi argue that the operator’s role is shifting from controlling equipment to interpreting intelligence, validating AI recommendations and making decisions that improve

Read more...
Designing the modern AI cooling stack
Schneider Electric South Africa Industrial Computer Hardware
As average rack densities in data centres climb from 16 to 27 kW in a single year, Schneider Electric’s Canninah Dladla outlines the six liquid cooling architectures available to operators, seven design factors, and three operational practices that determine energy and water efficiency.

Read more...
Software-defined automation is overcoming hardware interoperability limits
Schneider Electric South Africa SCADA/HMI
Schneider Electric’s Kobus Vermeulen and Sydney Higgo explain how open communication standards and software-defined architectures are enabling industrial operators to integrate legacy equipment, new control systems, and cloud platforms without disrupting operations.

Read more...
Zinc-based batteries power a more sustainable energy future
Electrical Power & Protection
Zinc-based batteries are gaining ground as a safe, recyclable and cost-effective energy storage option, from consumer electronics to grid-scale systems. The International Zinc Association’s Simon Norton explains why zinc is well placed to support the clean energy transition.

Read more...
Calcamite partners with Schneider Electric and 4Sight for smart water management
Schneider Electric South Africa Editor's Choice
Schneider Electric, AVEVA and 4Sight OT Automation are helping South African wastewater specialist, Calcamite, digitalise its modular treatment plants through a scalable edge-to-cloud automation platform, with the award-winning Gourikwa pilot now scaling to hundreds of remote sites.

Read more...
AI in industry is an early warning system, not a guarantee
Schneider Electric South Africa IT in Manufacturing
Schneider Electric’s Paul Steyn argues that AI in industrial maintenance is only as good as the infrastructure and people behind it, and explains the three layers a facility needs before predictive maintenance can deliver on its promise.

Read more...
Energas introduces lower-cost German gas genset for South African market
Electrical Power & Protection
Energas Technologies will supply R Schmitt Enertec’s new Energy Line genset to the South African market, offering German-engineered gas-to-power generation of 400 to 500 kW at a lower entry cost through focused standardisation and a simpler standalone architecture.

Read more...
ACTOM plays key role in large transmission substation project in Swellendam
ACTOM Electrical Machines Electrical Power & Protection
ACTOM has been appointed to engineer, procure, construct and commission the 1000 MVA main transmission substation for the Overberg Wind Farm in Swellendam, one of the largest substations of its kind in South Africa.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved