News


From the Editor's desk: Safety systems and IT in manufacturing highlighted in September

September 2016 News

Two of our most popular and topical features run together in this issue. Safety is top of mind at all well-run manufacturing facilities, mostly because it is just so much more efficient, for both personnel and equipment, when a facility operates in a safe way. And recently, manufacturing IT has also been in the headlines for many reasons, not least of which is that phenomenon known as the Industrial Internet of Things.

Tony Rayner of Phoenix Contact submitted one of the standout articles on safety matters and sent us the following as his motivation for writing it: “I have just finished reading a technical article about lightning strikes and surges, which, even though I have been in the industry for many years, was difficult to understand and rather boring. In light of the above, I was galvanised to try to simplify the explanation of surge and lightning protection dynamics. My hope is that this will make things easier for prospective users to make informed choices when purchasing such protection systems in the future.”

Tony’s article simplifies things for readers by differentiating between lightning induced and other types of electrical surges, for instance those caused by the switching of inductive loads. The article discusses the three main categories of protection devices and stresses that the most effective solutions use lightning and surge protection in conjunction with each other. There is also some useful information on good structural earth system practices, but perhaps the most valuable insight is to trust only a reputable supplier to safeguard those valuable production assets.(See ‘A short guide to lightning and surge protection’)

IT in manufacturing

Yokogawa’s Bradley Ford submitted an article with an interesting spin for this feature. What captured Bradley’s attention was the quirky new game called Pokémon GO, and in particular, some thought provoking implications for the process industry.

The article draws parallels between the dynamics of the fast-paced mobile consumer gaming industry and the more mundane business of manufacturing. Particularly it highlights the generation gap – technological as well as age – and how this could affect process automation platforms and the operators of the future.

Given that change is inevitable and that the rate of change is always increasing, Bradley uses the Pokémon GO analogy to speculate on how manufacturing companies will need to adapt in order to attract the bright young minds of today “who were all born with an iPad in their hands”.

The analogy is a good one since many forward-thinking companies have already invested some level of R&D into leveraging the power of augmented reality within their industrial facilities – very often for the purposes of training new young operators using 3D plant simulations.

Yokogawa has now taken these ideas further through a project called iMaintain. Working with Akzo Nobel in Germany, the collaborators designed a solution to overlay maintenance procedures and real-time data from the Centum DCS into an artificial reality display. iMaintain uses an Android tablet, which has a direct link to the process control system, to make information such as trend curves, alarms and operating instructions available to production and maintenance personnel working on site.

“Can the consumer world teach us how to bring the benefits of augmented reality and an immersive world to the plant floor?” Bradley asks, leaving us with a teaser to wonder about.

It will be interesting to see whether the use of mobile devices in industry increases in the future and whether these will converge with the commercial versions we now take for granted in our everyday lives. (See Pokémon GO: reflections on the process industry).

Don’t forget to register for the EtherCAT Breakfast Series

The EtherCAT roadshows are coming to town during September/October. Remember to register at www.instrumentation.co.za/ethercat and join us for a morning of technology and innovation at a convenient venue.

• Johannesburg – 30 September (The Fairway Hotel).

• Cape Town – 4 October (Durbanville Hills Wine Estate).

• Port Elizabeth – 6 October (The Beach Hotel).

• Durban – 7 October (Suncoast Casino).

Steven Meyer

Editor: SA Instrumentation & Control

[email protected]



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Reinstatement opportunity for ECSA registration
News
In 2023 the Engineering Council of South Africa (ECSA) announced a special opportunity for engineers in South Africa to reinstate their registration status if it had been cancelled. This exclusive offer is available until the end of August 2024.

Read more...
Fostering a collaborative learning environment for sugar producer
SKF South Africa News
One of South Africa’s leading sugar producers made strategic use of its off-crop season, turning scheduled downtime into an opportunity for both essential maintenance and valuable skills development with the help of SKF

Read more...
TechAccess and Schneider Electric partnership goes from strength to strength
Schneider Electric South Africa News
Schneider Electric, together with its longstanding partner TechAccess, is poised to take the Southern African market by storm.

Read more...
Steinmüller Africa and Eskom uplift eMalahleni communities
News
Steinmüller Africa, in partnership with Eskom, has reaffirmed its commitment to social upliftment by donating essential goods and creating meaningful connections with two impactful community organisations in eMalahleni.

Read more...
The top 10 emerging technologies of 2025
News
The World Economic Forum’s top 10 emerging technologies of 2025 are expected to deliver real-world impact within three to five years and address urgent global challenges.

Read more...
Comtest calibration user group seminar
News
Comtest invites metrology and calibration professionals to a focused technical seminar series aimed at demystifying some of the most common hurdles in inter-laboratory comparisons.

Read more...
Technology leaders shaping 2025
News
In an era where agility, innovation and execution are paramount, ABI Research’s latest report, ‘26 Technology Companies Leading the Way in 2025’ identifies the top players shaping the future across key digital technology segments.

Read more...
Omniflex through the decades
Omniflex Remote Monitoring Specialists News
As Omniflex celebrates 60 years of engineering excellence, we take a look back at the decade that saw us really kick in and deliver major engineering projects – the 1970s.

Read more...
Innomotics certified for innovative mine winder braking system
News
Innomotics has achieved SIL 3 certification for the COBRA 02 S braking system for mine winder installations, together with OLKO-Maschinentechnik.

Read more...
The true cost of cheap water in South Africa
News
The low cost of water has created a dangerous sense of comfort for South Africans.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved