Industrial Wireless


Banner Engineering simplifies monitoring of rotating equipment

November 2019 Industrial Wireless

Banner’s Wireless Solutions Kit for vibration monitoring is a fully integrated and easy-to-use solution for monitoring assets with rotating motion. It is designed to make it easy for users of any experience level to setup a wireless network, establish performance baselines and thresholds, and collect data from motors, fans, pumps, compressors, and similar equipment.

Key benefits

Reduce downtime and increase productivity: avoid unexpected downtime and make more informed decisions about maintenance schedules by detecting problems early before a failure can occur.

Simple setup: plug in the box, bind the nodes through the HMI screen, install vibration sensors and nodes on the equipment, and start collecting data. Performance baselines and thresholds are automatically generated and no programming is required.

Visualise data and alarms: HMI clearly displays alarms and graphs of raw vibration data along with baseline, warning and alarm values.

Local and remote monitoring: access raw data right on the HMI or via the cloud from any network accessible location.

Scalable solution: monitor and collect data from up to 16 assets.

Wireless Solutions Kits for vibration monitoring can be used with virtually any machine with rotating motion. These kits help users to:

• Identify machine performance issues caused by misalignment, unbalance, bearing failures, pump cavitation, blade damage, etc.

• Identify equipment requiring full spectrum analysis.

• Establish more strategic scheduling of equipment maintenance

https://www.youtube.com/watch?v=id0-qrhviso.

For more information contact Brandon Topham, Turck Banner, +27 11 453 2468, brandon.topham@turckbanner.co.za, www.turckbanner.co.za


Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

AGV systems need wireless networks
November 2019, RJ Connect , Industrial Wireless
In order for factories to perform their tasks efficiently and optimise production, automated material handling (AMH) systems, such as AS/RS and AGVs, need the flexibility to move around on their designated ...

Read more...
Bright, versatile illumination
November 2019, Turck Banner , Sensors & Transducers
The bright, uniform output of the WLB72 reduces shadows, improves visibility and gives workers the light they need to work efficiently and without making mistakes. A diffuse window minimises eye strain ...

Read more...
LM sensor for precise applications
October 2019, Turck Banner , Sensors & Transducers
Banner’s LM series of precision measurement sensors is now available in an even more precise model that features a 0,002 mm analog resolution at a range of 40-80 mm. The new LM80 model also features a ...

Read more...
I/O solutions with Profinet redundancy
October 2019, Turck Banner , Fieldbus & Industrial Networking
Turck’s Simple IO-Link Device Integration, SIDI for short, simplifies the handling of IO-Link. As its first fieldbus module with Profinet S2 system redundancy, the company has introduced the TBEN-L5-8IOL. ...

Read more...
How integrated visual management and remote monitoring demystify machine safety
September 2019, Turck Banner , IS & Ex
This article shares common challenges for machine safety, and shows how combining easy-to-use safety devices with visual indication and remote monitoring capabilities can help make safety simpler and more effective.

Read more...
Radar sensors: frequently asked questions
September 2019, Turck Banner , Sensors & Transducers
Radar sensors are commonly used for a wide variety of vehicle detection and collision avoidance applications, and they are a particularly good choice for outdoor deployments.

Read more...
Intelligent wireless connectivity
September 2019, RJ Connect , Industrial Wireless
The ultimate goal of most industrial automation applications is to obtain actionable insights from data sources for more precise decision-making. To achieve this, businesses need to make their field data ...

Read more...
Integrate IO-Link devices in Profinet
September 2019, Turck Banner , Fieldbus & Industrial Networking
Turck’s simple IO-Link device integration (SIDI) simplifies the handling of IO-Link devices in Profinet engineering systems. As the devices are already integrated in the GSDML file of the master, users ...

Read more...
Photoelectric sensors for washdown applications
August 2019, Turck Banner , Sensors & Transducers
Banners new T18-2 photoelectric sensors have an FDA-grade shatterproof plastic housing and are IP69K rated and Ecolab certified to protect against water ingress and chemical washdown. IP69K and epoxy ...

Read more...
Industrial Scientific expands ­connected safety portfolio
August 2019, Comtest , Industrial Wireless
Comtest has announced the expansion of Industrial Scientific’s connected safety portfolio to include cellular and Wi-Fi capability in the VentisPro5 Personal Gas Monitor and a satellite communication ...

Read more...