Maintenance, Test & Measurement, Calibration


SKF solution improves service quality at Barcelona Metro

October 2019 Maintenance, Test & Measurement, Calibration

For over a century, the citizens of Barcelona have relied on the metro to travel into and around the city. At peak times, 150 trains shuttle passengers between 158 stations on the eight-line network, which connects central Barcelona with seven surrounding municipalities.

Similar to many public transport systems around the world, the Barcelona Metro network operates in an environment of continually rising demand. In 2018, there were 407.5 million passenger journeys on the system, an increase of 17.1 million (4.4%) from the previous year. Overall demand for public transport in and around Barcelona has already exceeded the levels it was predicted to reach in 2020.

For operators, such as Transports Metropolitans de Barcelona (TMB), this growth creates pressure to continually improve the reliability and availability of vehicle services, whilst keeping costs under control. TMB has always been happy to pursue innovative solutions in order to achieve these goals: three lines of the network already operate using fully automated trains and TMB also has an on-going ambitious digital train project.

The latest innovation that will shortly be introduced on the network is a new approach designed to improve passenger comfort, as well as helping the operator infrastructure to be better managed for maintenance and track renewal activities. Wear and tear takes its toll on any heavily used rail network. Worn rails or worn wheels lead to bumpy journeys for passengers in the short term, and eventually they require repair or replacement.

In the past, the Barcelona Metro has relied on a combination of manual inspection and scheduled maintenance to keep its tracks in good condition. That approach is long-established, but quite costly. Inspection can only take place when trains aren’t running, and maintenance actions require rolling stock to be taken out of service, or lines to be closed for extended periods.

Multilog IMx-Rail condition monitoring technology

At the end of 2018, Barcelona Metro started to trial a different approach. It has equipped one of its standard commercial trains with Multilog IMx-Rail condition monitoring technology from SKF. The new system is a self-contained package of sensors and electronics to process and communicate data in commercial operation.

This system is mounted onto one of the train’s bogies, under a carriage. In everyday operation, the unit measures and records acceleration and vibration signals, it then processes this data and transmits all the information wirelessly to a back office collection point, where reported information can trigger required actions.

Next, a dedicated software system, also provided by SKF, uses smart algorithms to analyse the sensor’s data, along with information on the train’s location and operating conditions. The software system, called @ptitude Observer, identifies, locates and accurately records rail track abnormalities that might generate wear or damage to the train’s wheels, passenger discomfort, or noise on particular parts of the track. Metro maintenance staff can then use that information to trigger a more detailed inspection of the area of track identified.

“We are always looking for better ways to deliver a safe, reliable and cost-effective network,” says Fernando Vaquero, rolling stock engineer at TMB.“ Technologies such as Multilog IMx-Rail will help us to identify issues more quickly, and to target our inspection and maintenance activities more effectively.”

Multilog IMx-Rail doesn’t only help operators understand the condition of wheels and track. The system is also designed to identify vibrations caused by other problems on the train, such as faulty bearings. Other operators around the world are already using this approach to avoid breakdowns and optimise their rolling stock maintenance schedules. Sensors on the trains measure the condition of wheel and track interaction in real-time, spotting problems faster and allowing metro operators to optimise track maintenance planning and execution.


Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Keeping the clean room more than clean
January 2021, GHM Messtechnik SA , Maintenance, Test & Measurement, Calibration
The Delta OHM HD50CR multi-functional clean room logger/transmitter device offers the user highly accurate clean room monitoring and documentation for quality purposes.

Read more...
Machine health monitoring
January 2021, SKF South Africa , Maintenance, Test & Measurement, Calibration
The SKF Enlight Collect monitoring system combines SKF’s knowledge in machine health monitoring with LumenRadio’s patented network technology.

Read more...
Acoustic imager detects partial discharge
November 2020, Comtest , Maintenance, Test & Measurement, Calibration
Fluke’s new ii910 Precision Acoustic Imager detects corona, partial discharge and gas, steam and compressed air leaks that can hurt both production uptime and the bottom line.

Read more...
Portable instrument for multiple calibration tasks
January 2021, WIKA Instruments , Maintenance, Test & Measurement, Calibration
With the new model CPH8000 multi-function calibrator, WIKA makes on-site calibration even more efficient.

Read more...
The Fluke T6 with FieldSense technology
October 2020, Comtest , Maintenance, Test & Measurement, Calibration
FieldSense technology works by providing a capacitive path from a contact point on the back of the tester and the operator’s hand to earth ground.

Read more...
Preventive maintenance in pulp and paper mills
October 2020, R&C Instrumentation , Maintenance, Test & Measurement, Calibration
The thinking around machine condition monitoring has changed over the years and it is now stated that vibration is the better measurement over temperature, since it gives earlier warning.

Read more...
Leak detection has never been quicker and easier
September 2020, SKF South Africa , Maintenance, Test & Measurement, Calibration
SKF’s TKSU 10 ultrasonic leak detector is able to identify leakages in compressed air and vacuum systems, delivering substantial savings for end-users by reducing inspection time and minimising energy costs.

Read more...
Best practices in measurement
September 2020, Yokogawa South Africa , Maintenance, Test & Measurement, Calibration
Operating envelopes are changing and the impact of these changes on instrumentation must not be underestimated. Instrumentation with a design rating of a particular capacity is heavily stressed when the load is increased.

Read more...
Internal inspection of machinery
September 2020, SKF South Africa , Maintenance, Test & Measurement, Calibration
The TKES 10 Endoscope Series from SKF is designed for fast, easy internal inspection of machinery, delivering significant savings in terms of both time and money to customers and end-users.

Read more...
Parker releases new software tool
September 2020, Parker Hannifin - Sales Company South Africa , Maintenance, Test & Measurement, Calibration
IQANgo enables service technicians or machine owners to connect wirelessly to modules in their machines, allowing them to perform a broad range of actions such as system status checks and troubleshooting errors or alarms.

Read more...