News


Hytec in partnership agreement with GS-Hydro

April 2019 News

Hytec South Africa, and GS-Hydro, a multinational non-welded pipe manufacturer, have entered into a non-exclusive partnership agreement. This endorses Hytec South Africa as a sub-Saharan Africa distributor for all GS-Hydro components and piping systems above 42 mm. GS-Hydro is a leading supplier of non-welded piping solutions for hydraulic and other low and high pressure applications with a high demand on quality, reliability and cleanliness. The distributorship increases the company’s product and service capabilities and presents new opportunities for distributing non-welded, leak-free piping systems.

Cost savings through the lifetime of the piping systems are gained because there is a lower total installed system cost, a shorter installation time, less flushing time and reduced need for maintenance and repairs. “These benefits lead to fewer production interruptions and much shorter downtime when interruptions do occur,” says engineering manager, Andre Lindeque. “The flexibility facilitates fast and easy installation, which translates to significantly lower installation costs when compared to a welded piping system.”

The superior technology used, which provides the high-quality, leak-free piping system, is approved by classification agencies. The environmentally friendly pipes provide consistent quality due to machined and prefabricated assemblies, they are suitable for different materials, and they offer the highest level of cleanliness. “As there is no welding involved in manufacturing these pipes, there is no need for post-weld cleaning or costly weld inspections such as X-raying,” Lindeque explains.

Hytec South Africa currently has GS Hydro flaring and bending machines in use at its premises. The flaring machine provides 37° flaring with the capacity of flaring pipe sizes from 6 to 170 mm, and the bending machine has the capacity to bend pipes sized from 16 x 2 mm up to 60 x 6 mm wall thickness. Depending on the outside pipe diameter, the bend radius provided is either 2,5 or 3,0.

For more information contact Andre Lindeque, Hydraulic & Automation Warehouse, +27 11 281 3800, [email protected], www.hytecgroup.co.za



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Helping mines get results from water improvements
News
South African mines operate under constrained, water-scarce conditions where every investment must be justified. Xylem’s Chetan Mistry explains how the right water technology partner helps mines prioritise high-value water systems across the mining lifecycle.

Read more...
From solar to water, onsite plants are the next big industrial resilience shift
News
South African industrial operators who secured their energy supply with onsite solar generation now face the same imperative with water. Robert Erasmus of Sanitech argues that onsite water treatment is the next essential pillar of business continuity.

Read more...
From the editor's desk: Pushing engineering to the limit
Technews Publishing News
Among the many things robots can do, it’s a lot of fun to follow how fast they are. They go from the Boston Dynamics cheetah, which first reached a record-breaking speed of 45,5 km/h, to the robot Charlie ...

Read more...
Schneider Electric concludes Innovation Summit Middle East and Africa
Schneider Electric South Africa News
Schneider Electric's Innovation Summit Middle East and Africa, held in Abu Dhabi with more than 2500 attendees, explored the convergence of energy, AI and industrial software, launched an Industrial AI study and announced the NEST Accelerator Programme for energy and industrial tech startups.

Read more...
VEGA brings measurement expertise beyond mining to Electra Mining Africa 2026
VEGA Controls SA News
VEGA used its Electra Mining Africa 2026 stand to demonstrate that its level and pressure measurement instruments extend well beyond mining, covering water, food and beverage, pharmaceuticals, chemicals, and oil and gas applications across the continent.

Read more...
Sustainable solutions for sugar
Bearing Man Group t/a BMG News
BMG received a Special Commendation Exhibition Stand Award at the South African Sugar Technologists’ Association Congress, where it showcased an integrated turnkey drive solution designed to simplify the upgrading of ageing crushing-mill drive systems.

Read more...
Measure, Manage, Maintain: The operating model behind SA’s water resilience
Siemens South Africa News
South Africa’s growing water crisis is putting pressure on infrastructure, municipalities and the economy. Siemens highlights how digital technologies, smarter operations and safe water reuse could help shift the country from crisis response towards a more resilient and sustainable water future.

Read more...
VEGA brings measurement expertise beyond mining to Electra Mining Africa 2026
VEGA Controls SA News
VEGA used its Electra Mining Africa 2026 stand to demonstrate that its level and pressure measurement instruments extend well beyond mining, covering water, food and beverage, pharmaceuticals, chemicals, and oil and gas applications across the continent.

Read more...
Schneider Electric concludes Innovation Summit Middle East and Africa
Schneider Electric South Africa News
Schneider Electric’s Innovation Summit Middle East and Africa, held in Abu Dhabi with more than 2500 attendees, explored the convergence of energy, AI and industrial software, launched an Industrial AI study and announced the NEST Accelerator Programme.

Read more...
RX Africa and Messe Muenchen India join forces to strengthen business platforms in Africa
RX Africa News
Messe Muenchen India has announced a strategic partnership with RX Africa to strengthen the scale, reach and market impact of its premier co-located trade fairs, analytica Lab Africa and IFAT Africa, ahead of their 2027 editions.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved