classic | mobile
 

Search...

SA Instrumentation & Control Buyers' Guide

Technews Industry Guide - IIoT 2018

Technews Industry Guide - Maintenance, Reliability & Asset Optimisation

 

Electromagnetic flowmeter
October 2018, Flow Measurement & Control


Kobold’s new model EPS electromagnetic flowmeter has a standard accuracy of ±0,3% of reading stability of zero. The new developed, microprocessor-controlled UMF2 converter guarantees highest accuracy and is easy to operate via its alphanumeric backlit LCD terminal with six keys, plain text response and plausibility check of entries. Empty-pipe detection, coil current monitoring and plain text error messages guarantee full control over sensor and measuring point at any time. Pulse, status and current outputs, as well as HART communication, are standard features, all of which are electrically isolated. Lining materials, such as hard rubber, soft rubber, EPDM, ceramic, PTFE or PFA, are available. A wide range of standard and special electrode materials are on offer, including stainless steel, Hastelloy, platinum, titanium and tantalum. The EPS is available for nominal diameter from DN10 ... DN1200 and flow velocities up to 10 m/s.

The main features of the EPS are:

• High accuracy: 0,3% of actual.

• Maintenance-free.

• No pressure drop.

• Numerous lining materials.

• Numerous electrode materials.

• Low-cost grounding electrode instead of earthing rings.

The EPS is used to measure the volume flow of liquids, slurries, pastes and other electrically conductive media without any pressure drop. Pressure, temperature, density and viscosity do not affect the volume measurements. However, solid particles and small gas bubbles should be avoided.

For more information contact Instrotech, +27 10 595 1831, sales@instrotech.co.za, www.instrotech.co.za


Credit(s)
Supplied By: Instrotech
Tel: +27 11 462 1920
Fax: +27 11 462 1958
Email: sales@instrotech.co.za
www: www.instrotech.co.za
Share via email     Share via LinkedIn   Print this page

Further reading:

  • Flow control problems in a pulp mill
    January 2019, Valve & Automation, Flow Measurement & Control
    NAF’s advanced process valves solve pulp, paper and cellulose applications.
  • Dosage and fluid media monitoring
    January 2019, Instrotech, Analytical Instrumentation & Environmental Monitoring
    Kobold’s ZED-D electronic dosage devices are ideally suited for dosing and monitoring fluid media. They process the signals from separately-installed flow sensors and are mostly freely configurable. The ...
  • Humidity measurement in poultry farms
    December 2018, Instrotech, Sensors & Transducers
    Methods of farming chickens vary from country to country, however the general temperature and humidity conditions required for the three stages of chicken lifecycle are always similar. Temperature and ...
  • Temperature measurement within the plastics industry
    December 2018, Instrotech, Temperature Measurement
    Temperature is an important measurement parameter for many process techniques used in the plastics industry. Non-contact temperature measurement using an infrared sensor system is therefore an effective ...
  • Picomag for utility measurement
    December 2018, Endress+Hauser, Flow Measurement & Control
    In industrial process measurement and automation, demand is steadily rising for simple, reliable and maintenance-free measuring instruments in a pocket-sized format. The new Picomag from Endress+Hauser ...
  • Optisonic biogas flowmeter
    December 2018, KROHNE, Flow Measurement & Control
    The new Optisonic 7300 Biogas ultrasonic flowmeter from Krohne has been specially designed to measure dry and wet biogas with variable composition. The meter provides additional functions like calculation ...
  • Torque transducers for powertrains
    December 2018, Instrotech, Sensors & Transducers
    Climate change, urban air quality and the rising cost of energy have become the defining issues of the 21st century. With energy consumption and exhaust emissions from vehicles being significant contributors ...
  • Environmental challenges in the mining industry
    November 2018, Endress+Hauser, Flow Measurement & Control
    Endress+Hauser’s water quality measurement instruments.
  • Improved fuel management for mine fleets
    November 2018, Endress+Hauser, Flow Measurement & Control
    In the current economic climate, most companies are looking to make their Rands go further. This is especially the case when it comes to fuel, as modern industries cannot operate without it and diesel ...
  • Clearly visible flow measurement
    November 2018, Instrotech, Flow Measurement & Control
    To check the flow processes in pipeline systems and for insight into the interior of process pipes, many flow indicators are used in which the flowing medium sets a rotor turning and thus, to a large ...
  • Analysing pressure peaks
    November 2018, Instrotech, Pressure Measurement & Control
    Keller’s Leo 5 high-resolution digital manometer features precise sensor technology, fast signal processing, peak recording and data storage with a time stamp. Designed for deployment in hostile environments, ...
  • Mass flow measurement of gases
    November 2018, Instrotech, Mass Measurement
    The Kobold MAS mass flowmeter works according to the calorimetric method and was conceived for gas flow measurement. Since gases can be compressed, the volume changes with pressure and temperature. In ...

 
 
         
Contact:
Technews Publishing (Pty) Ltd
1st Floor, Stabilitas House
265 Kent Ave, Randburg, 2194
South Africa
Publications by Technews
Dataweek Electronics & Communications Technology
Electronic Buyers Guide (EBG)

Hi-Tech Security Solutions
Hi-Tech Security Business Directory

Motion Control in Southern Africa
Motion Control Buyers’ Guide (MCBG)

South African Instrumentation & Control
South African Instrumentation & Control Buyers’ Guide (IBG)
Other
Terms & conditions of use, including privacy policy
PAIA Manual





 

         
    classic | mobile

Copyright © Technews Publishing (Pty) Ltd. All rights reserved.