Motion Control & Drives


Hygienic design of bearings key to food safety

August 2017 Motion Control & Drives

An emphasis on the hygiene element of the design of equipment can play an important role in controlling the safety of manufactured food products. “However, applying this too broadly without focusing specifically on the hygienic design of the components part of the system, can potentially risk the spread of bacteria trapped within bearings,” says Davide Zanghi, the engineer responsible for the Hygienic Design Office in SKF.

Hygienic design considers specifically how problems such as corrosion, lubricant leakage, cleaning and self-drying could adversely affect food safety – and applies design principles to solve the problem. In essence, it is a design philosophy applied through dedicated and specific rules. Just as ergonomic design pays close attention to the physical needs of product users, hygienic design has a sharp focus on preventing issues of contamination.

Design principles – a view on bearing components

In general, EHEDG guidelines consider bearings an easy place to trap food particles and water and therefore these are seen as potential breeding grounds for harbouring bacteria. The advice is: keep bearings well away from food product contact areas.

This is very much the case with recent guidelines on hygienic design of belt conveyors for the food industry, where EHEDG addresses two of the major challenges in safe food production: how to avoid contamination of food through inadequately designed processing equipment, and how to improve food safety without raising operating costs for cleaning and production hygiene. Even if lots of attention goes on systems design and major components such as belts, bearings and bearing units consistently have a low profile within the overall hygienic system design.

However, even if not in direct contact with the food zone, bearings are often in the proximity of food product and with high pressure water or dry cleaning regimes they pose the risk that bacteria – if present – can get airborne and potentially contaminate the food product.

Hygienic design principles

In order to minimise the risk of contamination, designing bearings with hygienic principles in mind is a key consideration. One of the most important principles underpinning hygienic design is the ability to clean effectively. This may be easy to understand, but it is often difficult to achieve in practice for bearings and bearing units. For a start, the products should be made from non-corrosive and non-porous materials, such as stainless steel, or composites and with shapes that are cleanable and allow self-draining. Bearing units should have filled bases to prevent cavities where germs may fester.

In general, materials used such as elastomers, composites and grease, should be compliant with food safety directives and regulations. In all instances, potential of grease leakage onto the food product during operation must be avoided.

Ideally, bearing units should have effective end covers that prevent process contaminants and cleaning fluids from entering the bearing units cavity and, at the same time, allow for frequent visual inspection. Other relevant areas include:

• Avoid metal-to-metal contacts in between unit components and in between units and attaching surfaces.

• Avoid re-lubrication as much as possible.

• Achieve high service life despite the demanding operating and cleaning regimes.

Hygienic design applies to food production and packaging machinery in its entirety. But dealing specifically with one of the most problematic components – bearings – can only help to improve the overall risk strategy.

For more information contact Samantha Joubert, SKF South Africa, +27 (0)11 821 3500, [email protected], www.skf.co.za



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Turbomachinery controls: the call of duty
Schneider Electric South Africa Motion Control & Drives
There’s a lot to be said about the unsung heroes of this world; those men, women and machines that deliver such important functions, often overlooked and recognised. One such machine is turbomachinery, and while the name does sound quite obvious to the layman, its rich history and daily functions are not.

Read more...
More movement in the market
Motion Control & Drives
Aerotech aims to revolutionise the market for precision motion and machine controls with an intuitive control platform.

Read more...
Tapered roller bearings for wind turbines
Motion Control & Drives
A leading European manufacturer of wind turbines will use NSK’s tapered roller bearings with high load capacity in the gearboxes of its 15 MW class offshore wind turbines. The decision to specify the next-generation NSK roller bearings hinged on several key factors.

Read more...
Efficient maintenance counts
Bearing Man Group t/a BMG Motion Control & Drives
BMG’s total plant management solutions encompass a technical advisory service for maintenance programmes that includes correct chain and sprocket selection, which is a critical factor in any power transmission system.

Read more...
Automating drive systems for efficiency and reliability
SEW-EURODRIVE Motion Control & Drives
Already in use by leading global manufacturers in South Africa, SEW-EURODRIVE’s innovative MOVI-C modular automation system will bring a new level of flexibility, integration and efficiency to a wide range of sectors.

Read more...
Monitoring vibration allows for equipment longevity
Iritron Motion Control & Drives
Unscheduled downtime and maintenance on machines is often a source of frustration for many companies active in industrial manufacturing as it results in loss of process and productivity, which in turn equates to loss of revenue.

Read more...
Driving innovation in robotics and automation
Yaskawa Southern Africa Motion Control & Drives
Maintaining a competitive edge in a rapidly changing industrial landscape means embracing new technologies and adapting to evolving market demands. Yaskawa Southern Africa has positioned itself as a leader in robotics and automation, particularly in areas such as palletising, materials handling and advanced manufacturing

Read more...
Regular maintenance of cutting fluids is essential to maintain quality
Motion Control & Drives
Regular cleaning and maintenance of cutting fluid systems significantly enhances overall efficiency by extending the life of the cutting fluids, reducing downtime and improving the quality of the end products.

Read more...
Tough chain and induction hardened sprockets
Bearing Man Group t/a BMG Motion Control & Drives
BMG’s Tsubaki Titan chain series offers significant improvements in wear life, particularly in demanding applications like abrasive and dusty conditions.

Read more...
Rethinking common approaches to wire rope lubrication
Motion Control & Drives
Wire ropes are hard-working components in many different applications, from mines to lifts, ports, construction sites and drainage systems. Correct lubrication of wire ropes is absolutely critical because wire ropes are more than just cables, they are intricate machines composed of interdependent parts in constant motion.

Read more...