Maintenance, Test & Measurement, Calibration


Single controller detects 15 different gases

October 2016 Maintenance, Test & Measurement, Calibration

Developed to meet specific requirements for gas monitoring at fixed locations, the locally manufactured ESI Smart Sensor incorporates unique design features that effectively address the shortcomings of conventional sensor instrumentation.

This unit features a localised display of sensor information. A single controller can measure 15 different gases; typically including oxygen, carbon dioxide, flammable gases such as methane and noxious gases such as carbon monoxide.

The Smart Sensor can also accommodate other sensors with analog outputs, such as air velocity sensors or smoke detectors.

Ingress protection on the Smart Sensor exceeds IP56 and the instrument carries SANS IEC 60079 Part 0:2005, SANS IEC 60079 Part 11: 2007 and IEC 60529 (IP code) approvals. Also certified as EXia T4 Intrinsically Safe, the unit’s dimensions are 265 x 150 x 60 mm and it weighs 1,8 kg.

For more information contact Anton Lourens, Booyco Electronics, 086 126 6926, anton@booyco- electronics.co.za, www.booyco-electronics.co.za





Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

The Fluke T6 with FieldSense technology
October 2020, Comtest , Maintenance, Test & Measurement, Calibration
FieldSense technology works by providing a capacitive path from a contact point on the back of the tester and the operator’s hand to earth ground.

Read more...
Preventive maintenance in pulp and paper mills
October 2020, R&C Instrumentation , Maintenance, Test & Measurement, Calibration
The thinking around machine condition monitoring has changed over the years and it is now stated that vibration is the better measurement over temperature, since it gives earlier warning.

Read more...
Leak detection has never been quicker and easier
September 2020, SKF South Africa , Maintenance, Test & Measurement, Calibration
SKF’s TKSU 10 ultrasonic leak detector is able to identify leakages in compressed air and vacuum systems, delivering substantial savings for end-users by reducing inspection time and minimising energy costs.

Read more...
Best practices in measurement
September 2020, Yokogawa South Africa , Maintenance, Test & Measurement, Calibration
Operating envelopes are changing and the impact of these changes on instrumentation must not be underestimated. Instrumentation with a design rating of a particular capacity is heavily stressed when the load is increased.

Read more...
Internal inspection of machinery
September 2020, SKF South Africa , Maintenance, Test & Measurement, Calibration
The TKES 10 Endoscope Series from SKF is designed for fast, easy internal inspection of machinery, delivering significant savings in terms of both time and money to customers and end-users.

Read more...
Parker releases new software tool
September 2020, Parker Hannifin - Sales Company South Africa , Maintenance, Test & Measurement, Calibration
IQANgo enables service technicians or machine owners to connect wirelessly to modules in their machines, allowing them to perform a broad range of actions such as system status checks and troubleshooting errors or alarms.

Read more...
Condition monitoring solutions from Turck Banner
September 2020, Turck Banner , Maintenance, Test & Measurement, Calibration
Turck Banner’s retrofit solution can be used in industrial plants that do not yet fully support Industry 4.0 sensor-based condition monitoring. Machines can easily be monitored by customised systems, with data transmitted via wireless networks if required.

Read more...
Detect compressed air, steam, gas and vacuum leaks
September 2020, Comtest , Maintenance, Test & Measurement, Calibration
Comtest has introduced the Fluke ii900, a handheld sonic industrial imager that enables maintenance to quickly locate air, steam, gas and vacuum leaks in compressed air systems. The straightforward, intuitive ...

Read more...
Condition monitoring in the cloud
August 2020, Festo South Africa , Maintenance, Test & Measurement, Calibration
Detecting irregularities at an early stage and initiating the necessary measures before a system failure are now made possible by the dashboards and IoT gateway CPX-IOT from Festo. The turnkey, preconfigured ...

Read more...
The Ratchet P-Clamp reloaded
August 2020 , Maintenance, Test & Measurement, Calibration
When a heavy-duty equipment manufacturer asked HellermannTyton to devise the most effective way to attach and remove cables for additional equipment, nobody imagined that a well-trodden path would lead ...

Read more...