Siko has developed a range of wire-actuated encoders for a wide spectrum of applications with measurement lengths ranging from 600 mm to 40 m. The functional principle is simple. A measurement wire is wound onto a drum and when the wire is pulled out, it causes the drum to rotate. A sensor connected to the drum axle records this rotation and generates a measurement signal proportional to the wire movement of the drum, which indicates the position.
When extending crane arms, exact position detection of the supports is essential in order to prevent the crane or truck from tilting or toppling over. This is done by measuring the current values of the extended supports and comparing them directly with the length of the extended crane arm. This means that complete extension of the crane arm is only possible if the supports are also extended to the maximum width.
Lifting platforms
Wire-actuated encoders are not only used for cranes operating at great heights. Optimum precision is also needed when extra-long loads have to be lifted. Wire-actuated encoders ensure even lifting e.g. of trains, underground trains or trams using a lifting platform. Failure to observe this can cause strain, which can result in damage to the entire construction.
Space-saving and resistant to cold
A redundant system is often necessary for safety reasons and in space-constrained situations. With these precision requirements in mind, Siko has developed the SG 30 wire-actuated encoder with its particularly slim, compact design. Despite its space-saving size and lightweight of approx. 500 grams, no compromises have been made with regard to stability. The outer housing is made of sturdy zinc die-casting and the spring housing of fibreglass-reinforced plastic.
Another unique feature of the SG 30 is its wide range of working-temperatures, which enables it to be used from -40 to 80°C. Four lockable aeration holes are integrated to avoid condensation. The wire outlet has a special protective seal. The wire pullout is flexible, so that 100% alignment with the extension direction of the outlet is not necessary.
Novel bearing steel next generation of aeroengines SKF South Africa
Motion Control & Drives
SKF continues to re-imagine intelligent and clean rotation with the development of an innovative temperature-resistant, corrosion-tolerant steel called ARCTIC15 designed for aeroengine bearings.
Read more...Products from maxon
Motion Control & Drives
A wide range of new products is available from motion control specialist, maxon. with a diverse technology portfolio ranging from highly integrated robotic actuators to powerful servo drives and controllers.
Read more...Actuators for precise hexapod movements
Motion Control & Drives
Aerotech, manufacturer of high-performance motion control and automation systems, is expanding its Automation1 platform. These compact hexapod devices enable the complete integration of six-axis motion systems into existing control
Read more...SEW-EURODRIVE service centre transforms future of drive repairs SEW-EURODRIVE
Motion Control & Drives
In a momentous step for the local industrial gearbox and drives market, SEW-EURODRIVE South Africa has formally opened a new service and repair facility alongside its headquarters in Aeroton,
Read more...Precision meets performance: The ELGD Axes Family from Festo Festo South Africa
Motion Control & Drives
Festo has introduced the ELGD axes family, engineered for the demands of future-focused industries. With cutting-edge guide technology, exceptional rigidity and high load capacity, these axes deliver more performance within the same installation footprint.
Read more...Condition monitoring in hazardous areas SKF South Africa
Motion Control & Drives
SKF is further strengthening its condition monitoring offer portfolio by a newly developed hazardous area version of its Microlog Analyzer dBX portable vibration analyser.
Read more...Rip-and-ship solution speeds up nuclear decommissioning project
Motion Control & Drives
When removing steam generators from decommissioned nuclear reactor buildings, the most economical method is to remove them in one piece. Mammoet was commissioned by Framatome to support with the removal of four steam generators from PreussenElektra’s Nuclear Power Plant Unterweser in Germany.
Read more...WearCheck turns the focus on friction modifiers Wearcheck
Motion Control & Drives
One of the most important features of a lubricant is the reduction of friction between two surfaces.A dditives like friction modifiers are added to perform this function. Wearcheck turns the focus on friction modifiers
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version