Inden is a strip-mining site in the Rhineland brown coal mining district. The field is approximately 4500 hectares in size and its coal seams are up to 45 metres thick, lying as far as 230 metres beneath the earth’s surface. Bulkscan LMS511 laser volume flowmeter measures the bulk material on the conveyor belts and so varies the slew speed of the bucket-wheel excavator.
Laser measuring optimises material removal and enables driverless operation of tripper cars
Yard by yard, the swinging booms of the bucket-wheel excavators cut through the earth. The bucket wheel moves the excavated earth onto a belt located on the boom, from where it is transported to an overland conveyor system. RWE Power has installed a Bulkscan LMS511 above the first belt on the boom. The laser volume flowmeter quickly and precisely measures the profile of the bulk materials and, using the belt speed, calculates the current volume flow. “This value is used in the bucket-wheel excavator control in order to vary the slew speed, and therefore the output, so that the most uniform volume flow possible is ensured. The resulting avoidance of peak loads also reduces system wear,” says RWE Power’s Bernd Steyer.
The proper alignment and positioning of the tripper car is also ensured with the help of laser measurement technology. The laser scanners are attached to the structure of the tripper cars in such a way that a vertical scan of the overland conveyor’s belt frames takes place in both the front and rear areas. “The laser scanners on the tripper car ensure exact positioning relative to the overland conveyor system. An additional function is the accurate control of the tripper car ramp section height relative to the overland conveyor,” says RWE Power’s Manfredo Cammaleri.
Currently, the predecessors of the LMS511 are still in use on the tripper cars. However, the LMS511 devices are now being trialled on both the tripper cars and bucket-wheel excavator booms.
Miniature inductive sensors ifm - South Africa
Sensors & Transducers
The inductive IY/IZ type sensors from ifm are used in various industrial areas where space is limited.
Read more...PDS implementation on mines
Sensors & Transducers
Level 9 vehicle intervention for collision avoidance has been mandatory on South African mines since 2022, yet the effective roll-out of proximity detection systems remains slower than expected. This is not due to the technical limitations of integration but to operational readiness on site.
Read more...Monitoring analogue process values ifm - South Africa
Sensors & Transducers
Everywhere in industry, electronic sensors are used to detect process values such as temperature, pressure or flow. Process value monitoring often takes place directly in the sensor.
Read more...Protecting buildings’ embodied carbon with retrofitted systems Schneider Electric South Africa
Sensors & Transducers
The World Economic Forum has said that around 80% of the buildings in existence will still be around in 2050; it is therefore essential that in order to combat climate change we retrofit them for energy efficiency.
Read more...Listening for damage to wind turbines
Sensors & Transducers
The Fraunhofer Institute for Integrated Circuits, working in concert with the Fraunhofer Institute for Wind Energy Systems, has developed a solution that can be used to identify cracks and breakage inside wind turbine blades remotely at an early stage.
Read more...Enhancing gold leaching efficiency Endress+Hauser South Africa
Sensors & Transducers
Endress+Hauser offers a range of advanced technologies designed to enhance the stability and accuracy of pH and dissolved oxygen measurements on gold processing plants.
Read more...Powering safer mining with PDS
Sensors & Transducers
With the mining industry under increasing pressure to prioritise safety without compromising productivity, Booyco Electronics is pushing the boundaries of Proximity Detection System and Collision Avoidance System technology across both underground and surface operations.
Read more...The car of the future listens
Sensors & Transducers
The perception of external sounds in cars has been lacking, even in automated driving. That is why Fraunhofer IDMT-HSA is researching the integration of acoustic sensor technology in its KI4BoardNet project with the Hearing Car.
Read more...High-performance LineScan camera
Sensors & Transducers
Lynred, a global leader in infrared imaging technologies, has launched its next-generation SWIR LineScan camera and sensor, specifically designed for the inspection of silicon wafers, solar panels and waste management.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version